Prusa 3D printer belt

9 views
Skip to first unread message

Jaden Vincent

unread,
Feb 1, 2018, 5:16:32 PM2/1/18
to Chattlab Chattanooga



Just wondering here, I have mounted the belt on the new 3d printer and have a bit of extra here is a picture:
I do not want to make any modifications unless instructed to do so, but any advice is appreciated. 




IMG_0858.jpg

Jason Brown

unread,
Feb 1, 2018, 7:08:14 PM2/1/18
to chattl...@googlegroups.com
Here’s what I have done in the past:
Until you are sure it’s installed correctly loop up the excess and secure as out of the way as possible with a zip tie. Once things are up and running and past the calibration stage, then trim off some of the excess to neaten things up.

Jason

Sent from my iPad
--
You received this message because you are subscribed to the Google Groups "Chattlab Chattanooga" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chattlab-lis...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
<IMG_0858.jpg>

Jaden Vincent

unread,
Feb 1, 2018, 9:52:17 PM2/1/18
to Chattlab Chattanooga
Never mind I decided to continue with the building process then found another belt once I got to assembling the x-axis belt. My own error, Thanks though!

Jeff Johnson

unread,
Feb 1, 2018, 9:59:52 PM2/1/18
to chattlab-list
You were right to not cut it!  :)

--
You received this message because you are subscribed to the Google Groups "Chattlab Chattanooga" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chattlab-list+unsubscribe@googlegroups.com.
Reply all
Reply to author
Forward
0 new messages