Samsung Galaxy Tab 8 Usb Driver

[Gaynelle Brigges]

Iknow this HOWTO is for a different device, but Windows not detecting a phone in fastboot mode is a rather frequent problem and the solution depends on Windows and not so phone model. So the steps described there should help you, too.

About two weeks ago I installed TWRP on Windows on Galaxy S8. With the phone connected, I ran Widows update and some drivers got installed. I even installed USB drivers for phones from

-usb-driver.html

Thank you all for your answers, I start to get a better understanding of the process.

I will keep on reading links you provided, and first of all I will install new drivers, probably these ones: -galaxy-s9-exynos-usb-drivers/

(by choosing one of the other models there), you could perhaps carry out an experiment with something similar to a procedure suggested by Matti Haveri in a discussion Samsung ML-1640 laser printer (usb only) - Apple Community. A Samsung SCX-4623 Series 1.08.01 printer driver is listed in Printer and scanner drivers for Mac - Apple Support. This may or may not work with your printer. As always, make sure that you have backup copies of all important files before testing anything at all.

It is also worth noting that the Samsung Xpress M2070FW is listed in About AirPrint - Apple Support as a model supporting Apple's AirPrint technology. This means that printing should not require an extra driver, provided that the M2070FW and the Mac computer are connected to the same network. AirPrint works with wireless (Wi-Fi) or wired (Ethernet) network connections, so you could choose to wire this printer by Ethernet to one of the LAN ports of the Wi-Fi router (instead of connecting wirelessly), if you so wish. This way, some of the difficulties related to Wi-Fi may be avoided.

Would the exact printer model be SCX-4824FN? That is, do you have a network printer (Ethernet)? If so, is the actual printer connection via Ethernet (via a switch/router), or are you using USB directly from the computer?

I have Macos ventura 13.6.2 and Samsung scx-4828fn. I tried the universal driver and installing the specific samsung scanner app. The installation was successful, the scanner is now detected in image capture, although it cannot communicate with the scanner. I get an error message that the os cannot open the samsung scanner app, there's a risk of malicious software, so it needs to be updated by samsung. Can you help me? Thanks!

hey, a bit off topic question, I downloaded the files from the first link you recommended but the softwares didn't seem to work for my samsung printer. I'm new to macOS and I was just wondering whether you could help me with the uninstallation? the uninstaller included in the downloaded file doesn't work as well. thank you

This thread has been so useful for folks, I hope I can find a match for my situation. I have Sonoma running on Apple silicon, and trying to get my Samsung SCX-4623F to work. I'm trying several drivers from the universal driver download but not luck. Any pointers? Thanks!

I have an older, but very efficient (B&W laser) Samsung SCX-4729FW. This model does not appear in the list, so I used the generic PCL driver and my prints were soft with many problems with the general quality. So I searched and finally forced my printer to work with the HP LaserJet Series PCL 4/5 driver. It seems to work very fine now with direct print, Word and Photoshop. I may not have all the controls, but it looks definitely better (when you put the parameters to best quality). I just did a scan test through my Mac and it worked perfectly with this driver. I don't know if all the controls are there, as I have been using VueScan for more than 10 years without issues. I can now stop looking for a new printer.

3a8082e126