Race Me Ultra Controller

[Gaynelle Alnutt]

I am no stranger to using a gamepad for my PC game playing, but at this point, Xbox has really simplified that process with its simple connect-and-play controller style. So when I was presented with the MOGA XP ultra to test out, it had some significant hurdles to overcome to win me over.

The first thing that took me by surprise and is something I never really considered when using an XBOX controller is its size. The MOGA XP Ultra is modular in design and comes in four different form factors. One is a complete form that includes the grips giving it a full XBOX controller feel with a clip on the back end to hold almost any Android phone. Without the clip, this is the mode I used the most, as it resembled your average controller. Then, there is a detached version, which is basically a mini controller, and finally, the mini version with the clip.

Without the clip, the mini version is a fantastic starter controller for kids. While I found it to be too small to use for more than ten minutes without my hands cramping up. My kids, both four and eight, respectively, found this smaller controller more manageable to use than a regular sized controller. The only downside to this mini version is when you take off the grips, and it also takes the back buttons with it.

If you attach the clip to hold your phone with the mini version, it becomes practically unusable. The weight balance is all off with your phone connected, making it incredibly hard to play anything while trying to play a balancing game simultaneously.

That being said, the fully complete controller, with the grips and back buttons, along with the ability to remap any button, is what makes the MOGA XP Ultra stand out and is a real move forward in terms of making the controller accessible. The weight in the controller is very nice, and the build has this premium feel to the actual materials used to make the controller. With textured grips and well-placed back buttons, not to mention at the touch of a button, you can see your remaining battery level displayed on the controller.

MOGA is touting a pretty impressive battery life in the MOGA XP Ultra, and it holds up. I managed to get roughly 37 hours out of the controller before it died when it was connected to my PC and Google Pixel 7 Pro. They even mentioned that when paired with an Xbox Series S/X, you could see up to 60 hours of battery life, which is just incredible.

Otherwise, the pairing process was generally easy. With the touch of the pairing button, I was able to connect to my PC, Google Pixel, and Xbox with ease, and except for a few exceptions on PC, it was off to the races immediately. I did have a few controller-supported games that did not recognize the MOGA XP Ultra, Dead By Daylight, Dying Light 2, and Persona 5. But everything else, like Call of Duty, Fortnite, Forza 5, and The Last Of Us Part 1, all worked flawlessly with nothing noticeable in the lag department.

This post may contain affiliate links. If you use these links to buy something, CGMagazine may earn a commission. However, please know this does not impact our reviews or opinions in any way. See our ethics statement.

CGMagazine may earn a portion of sales from products that are purchased through our site as part of our affiliate partnerships with retailers. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of CGMagazine. By using this website, you signify your acceptance of these Terms of Use.

Since have stepped in this hobby, I have multiple questions regarding various Flight Controller.

I understand that a flight controller is brain of the computer and make uses of various sensors to gather data and make the vehicle stable as much as possible.

mRo Pixracer pro is my main Jam. Jordy does not realy need any of my backing as he makes a ton of cash but from a flight stability it is hard to match. I also like the Zealot as you get all the cables super simple to install like the PRP.

You can use ardupilot on a racing quad though it will be harder to tune everything than in Betaflight as neither MissionPlanner nor QGroundControl have nice GUI for setting parameters (there are dedicated GUIs for some stuff but they are mostly geared towards preparing autonomous operation and RC controls assignment).

The new dual-stage boost controller features a billet aluminium housing and bullet valve technology for ultra-fast boost response with two adjustable boost levels. Toggle between great and low boost on the fly. Ideal replacement for factory boost controllers. Both high and low boost settings are fully adjustable.

They are manufactured from high-grade billet aluminium and are renowned for their easy installation, robust design, and stability. Our detent adjustment system allows for accurate and simple tuning of boost pressure.

It is the responsibility of Turbosmart to warn its customers and employees that some products sold on this website contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.

Shows flag signals along the track. All common flags (green, red, yellow, safety car, oil slick, etc.) are available. The X2 LED Panels are homologated by the FIA & FIM for Grade 2 circuits and lower grades.

A multi-functional display (3m x 1m) for all forms of track information.

In racing environments, the LED Race Info Panel provides a clearly visible

indicator of Black Flag notices, Penalty Laps / Stops, and general info such

as Time or Laps to Go.

The lights play a key role for track control by informing the drivers/

riders when the track is open or not, and also if there is oncoming

traffic on exiting the pit-lane, to ensure sufficient care is taken

upon exit.

Detection RADAR used in the Pit-In and Pit-Out vehicle detection system.

The fully configurable vehicle detection system reliably detects oncoming

vehicles. The system can automatically activate Pit Exit Blue light function to alert the vehicle leaving the pit-lane of the oncoming traffic, warning horns or other analog devices.

Enables racers, teams, broadcasters, and scrutineers to stream live 2-way data via RF over CAN Bus, like results, tire pressure, RPM, balance of performance, rev, cockpit temperature, battery status. Also allows live tracking of all vehicles.

The X2 LED Bar shows safety flags as communicated through RF by RaceControl. It is an add on to marshals flagging. The X2 LED Bar functions in combination with the X2 RaceLink Club or X2 RaceLink Pro.

Enhance safety measures on karting tracks by introducing MYLAPS X2 Race Control for Karting. Introduce live GPS tracking of karts alongside ultra-bright trackside flagging for improved flag visibility and redeployment of marshals.

Discover the full range of MYLAPS X2 Race Control products tailored for motocross tracks. Elevate safety standards on the MX track by incorporating live GPS tracking of riders alongside high-visibility flagging.

MYLAPS MX Light Panels are engineered specifically to heighten safety for motocross participants and track personnel. These panels display crucial safety warnings like yellow and red flags and surpass industry standards with their wider viewing angle, increased brightness, and unmatched reliability.

At MYLAPS, we are constantly looking for innovative ways to minimize our environmental impact. As of 2022, MYLAPS is a carbon neutral company. Durability is key for product development, and our products can be used for several years in all weather conditions.

The Oval is the perfect speed controller for anybody wanting to upgrade their old stock motor speed control in their oval car, for a no nonsense race stock limited, reversible electronic speed control allowing you to run race stock motors to the highest performance possible!

The Oval is a one-off speed control that was designed for the Viper range with the help of some of today's leading Oval race drivers! It has been tailored to get the very best out of any race stock motor, giving you more punch, acceleration and performance than you will have ever seen before, on top of the increased performance you get from the Viper Oval, the controllers software has been designed, with the help of multi national winning racers, to develop the best feel and power for circuit racing.The controller has normal forwards operation, then when the throttle is pulled back, the first 1/3 of throttle stick travel is purely brakes, the second 2/3 or throttle stick travel is reverse.

On top of all the new features on the Oval, you still get all the usual protection you expect from a Viper speed control! Motor stall protection, motor short protection and of course ................ they are 100% waterproof.

If the item is in stock we aim to despatch all orders within two working days (Monday to Friday). If any item is not in stock, please allow up to 14 days for delivery. For special order items, please allow 21 days delivery.

All goods sent within the UK are sent by Royal Mail or UPS and we aim for delivery within 3 working days. Overseas delivery may take a little longer and may be subject to delay in customs. Deliveries may be subject to import duties and taxes and the burden lies with the purchases to satisfy charges subsequently incurred.

At Mtroniks we want you to be totally happy with everything you purchase from us. If you have a problem it is very helpful to us if you Indicate what the problem is and whether you require us to take a look at it for you. We cannot refund to you if you do not have your purchase details!

3a8082e126