Re: [dongle] E160 Huawei Modem voice problem

[Paco Gil]

hi,

looks like your model does not support voice:

[Oct 17 12:29:01] ERROR[22978]: at_response.c:472 at_response_error: [dongle0] AT^DDSETEX failed

On Wed, Oct 17, 2012 at 11:36 AM, okwii David <oqui...@gmail.com> wrote:

Hello,

I've successfully configured by 3G modem with asterisk using the chan_dongle driver. However, when i call from a gsm phone, i don't hear a thing even if the dialplan executes in asterisk! what could be the problem? Thanks

  oquisuse*CLI> dongle show device state dongle0

-------------- Status -------------

Device : dongle0

State : Free

Audio : /dev/ttyUSB7

Data : /dev/ttyUSB8

Voice : Yes

SMS : Yes

Manufacturer : huawei

Model : E160

Firmware : 11.609.06.02.94

IMEI : 351596033694334

IMSI : 641140100542752

GSM Registration Status : Registered, home network

RSSI : 16, -116 dBm

Mode : No Service

Submode : No service

Provider Name :

Location area code : 12C

Cell ID : 2983

Subscriber Number : Unknown

SMS Service Center : +256790000012

Use UCS-2 encoding : Yes

USSD use 7 bit encoding : No

USSD use UCS-2 decoding : Yes

Tasks in queue : 0

Commands in queue : 0

Call Waiting : Disabled

Current device state : start

Desired device state : start

When change state : now

Calls/Channels : 0

Active : 0

Held : 0

Dialing : 0

Alerting : 0

Incoming : 0

Waiting : 0

Releasing : 0

Initializing : 0

-- Executing [s@incoming-mobile:1] Gosub("Dongle/dongle0-0100000000", "subTest,s,1()") in new stack

-- Executing [s@subTest:1] Answer("Dongle/dongle0-0100000000", "") in new stack

[Oct 17 12:29:01] ERROR[22978]: at_response.c:472 at_response_error: [dongle0] AT^DDSETEX failed

-- Executing [s@subTest:2] Playback("Dongle/dongle0-0100000000", "hello-world") in new stack

-- <Dongle/dongle0-0100000000> Playing 'hello-world.slin' (language 'en')

-- Executing [s@subTest:3] Hangup("Dongle/dongle0-0100000000", "") in new stack

== Spawn extension (subTest, s, 3) exited non-zero on 'Dongle/dongle0-0100000000'

[okwii David]

paco,

Thanks for the reply,

but when i check for the status of the modem using  dongle show device state dongle0, it shows voice as"yes" as seen above!!

Plus the modem is unlocked too.

Anything else i can do? thanks  again. 

[okwii David]

Paco,

and if all fails, what modems models are tested and support voice? thanks again. 

On Wednesday, October 17, 2012 3:56:46 PM UTC+3, paco wrote:

[okwii David]

Paco,
Again according to unlocker-dc software, voice is enabled!!

===================================================================


DC - Unlocker 2 Client 1.00.0913

Detecting card :

selection :
manufacturer - Huawei modems
model - Auto detect (recommended)

Found modem         : E160
Model               : Huawei E160/E160G/E160X
IMEI                : 351596033694334
Serial NR.          : DK5TAA1920501488
Firmware            : 11.609.06.02.94
Compile date / time : Jun 24 2009 12:25:58
Hardware ver.       : CD25TCPU
Dashboard version   : UTPS11.300.05.06.94_MAC11.301.09.04.94
Chipset             : Qualcomm MSM6246
NAND Flash          : SAMSUNG_K9F1208
Voice feature       : enabled
SIM Lock status     : unlocked
Wrong codes entered : 3 (unlock attempts left : 7)

On Wednesday, October 17, 2012 3:56:46 PM UTC+3, paco wrote:

[Elias Andrade]

    E173 support voice.

-- 
[ ]'s
Elias Andrade
Linux User 229468 | PGP/GPG: 0x40770C9F
http://eliasandrade.wordpress.com
Paranaguá - Paraná - BR [<o>]

[Paco Gil]

try to use minicom and then issue:

at^cvoice?

If you get something like:

^CVOICE:0,8000,16,20

then voice is enabled. If response is:

^CVOICE=1

then voice is NOT enable.

Also check  http://wiki.e1550.mobi/doku.php?id=preparation&s[]=cvoice#how_to_activate_voice_on_huawei_modems

regards,

[Din Assegaf]

Ok When I got E1550, ^CVOICE=1

It means Disabled, what should I do ?

I use E1550. Any AT Command to enable it ?


Syeh Abidin

[okwii David]

Me too,

am getting  ^CVOICE=1 

Which command voice enables the modem?

[Paco Gil]

please, read the wiki...  you can upgrade with firmware o issue at^cvoice command.