Skip to first unread message
Jony Liu
Feb 4, 2020, 10:14:22 PM2/4/20
to CERAMBOT
In this case the cause was having the wiring for the X and Y limit switches reversed. Solved it by swapping them around on the stepper motor board.
Jony Liu
Feb 4, 2020, 10:15:42 PM2/4/20
to CERAMBOT
Or you can do that: In this case the cause was having the wiring for the X and Z limit switches reversed. Solved it by swapping them around on the stepper motor board.
Reply all
Reply to author
Forward
0 new messages