Wide Belt Sander

[Jonathan Smith]

I am working on a table top that is 36” x 42” x 1.5” thick.  I am looking for a shop in town that has a wide belt sander.  I know about the one at Hardwood Industries but it is only for materials they sell.  I know about the CNC router sleds but really need a sander. 

Thanks.

Jonathan Smith

Bend, OR

503-995-0900

[jonatha...@bendbroadband.com]

The material is maple burl and 6 week old cured epoxy.  This is a re-do.  The top and bottom are flat and parallel as it was flattened before in a cnc.  I screwed up the finish sanding on top and made some low  spots .  It's flat within 1/32".  1 would like a 120 grit finish.

Jon Smith

503-995-0900 

---

From: Dana Adoretti - Hardenbrook Hardwoods <da...@hardenbrookhardwoods.com>
Sent: Tuesday, June 30, 2026 10:20:26 AM
To: Jonathan Smith <jonatha...@bendbroadband.com>
Cc: central-oregon-...@googlegroups.com <central-oregon-...@googlegroups.com>
Subject: Re: Wide Belt Sander

Hi Jonathan

We have a 37" dual belt sander here in Redmond at Hardenbrook Hardwoods. Is the piece flat to start with? What type of wood? 

--
You received this message because you are subscribed to the Google Groups "Central Oregon Woodworkers (COW)" group.
To unsubscribe from this group and stop receiving emails from it, send an email to central-oregon-woodwo...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/central-oregon-woodworkers-cow/004b01dd089c%2499a9b7e0%24ccfd27a0%24%40bendbroadband.com.