Eppendorf Centrifuge 5424 Price

[Trinidad Baltzell]

TheEppendorf 5424 Centrifuge is a fast, accurate, and durable. Their 24-place rotor with a maximum speed up to 21,130 g in a compact footprint is a great centrifuge for laboratories. They are perfect for molecular biology applications in microcentrifuge tubes, spin columns, and PCR tubes.

This unique rotor offers a solution for a common problem when working with MiniPrep spin column kits: open tube lids that shear off during the elution step. This problem traditionally occurs because standard rotors do not provide enough support for open tube lids during centrifugation. The Eppendorf Kit rotor is designed with an extended rim that serves as a rest for tube caps during centrifugation and protects them from shearing off. Your tube lids will not tear off anymore.

The Eppendorf 5424 Microcentrifuge offers you power and flexibility in a compact footprint. This Eppendorf centrifuge reaches speeds up to 15000 rpm, and a force of up to 21130 x g. The capacity of the fixed angle rotor holds 24 1.5/2ml tubes, with a chemically resistant, aerosol-tight lid. The Eppendorf centrifuge 5424 will do timed runs between 3 minutes and 9 hours and 59 minutes, with a hold feature. Controlling this microcentrifuge is simple from the upfront digital control panel with a touch keypad for easy cleaning or a dial control panel for rapid input. Each features a separate short spin key for quick spin downs, and a button to swap between rpm and rcf display.\nThe latch-less lid of the 5424 microcentrifuge helps to reduce noise and pops open signaling the end of a run. This ergonomic lid also closes with the touch of one finger and with minimal force. The 5424 Centrifuge is whisper quiet at

Eppendorf Model 5424 R is a versatile 24-place centrifuge that set new standards for silence, speed and simplicity. It is the direct replacement for the legendary Model 5415 R. The OptiBowl design allows for whisper quiet operation, even without rotor lid to reduce handling time and benefit your work environment. They provide centrifugation speed up to 21,130 x g (15,000 rpm), with additional spin functions, to satisfy all of your applications. The operating concepts and overall design are based on in-depth ergonomic studies, making everyday routines faster and easier. The Centrifuge lid comes with a soft-touch, one-finger closure for ergonomic operation. The 5424 R comes with a built-in condensation drain to eliminate water accumulation and prevent corrosion. FastTemp program is optimized for super fast 8 min pre-cooling and maximum temperature accuracy inside the rotor. Maintains constant 4C at maximum speed. ECO shut-off engages after 8 hours of nonuse to reduce energy consumption and extend the compressor life (can be deactivated in menu). Saves you up to 40% energy overnight. Rotor and adapter combinations can be determined at time of purchase.

The Eppendorf 5424 is high performance centrifuge with a compact footprint and near-silent operation even without the rotor lid. The low-profile design provides an easily accessible chamber for comfortable loading and unloading. This Eppedorf 5424 come with a 24 x 1.5mL rotor and is compatible with rotors for processing spin columns with open tube lids and spinning PCR strips. Rotary knobs allow users to quickly set run parameters.

All of our equipment is used and reconditioned. Our technicians test the performance of all centrifuges and make sure the rotating assembly is properly balanced; the bearings, seals and gaskets on the spindle assembly are in good shape; and the controls work properly. If the centrifuge is refrigerated we also test to make sure that the machine reaches and hold temperature properly. All tolerances are measured and the exterior and interior of all units are fully cleaned. If the unit is being purchased with a rotor we test the rotor/centrifuge combination together.

The centrifuge runs smoothly as long as it is spinning up or running normally, but as soon as it tries to break, Err 6 appears on the screen. I've already talked to a technician, but they were not too helpful.

Error 6 on Eppendorf 5424R . First thing to check is the brake resistor mounted in the back of the unit above compressor.. the solder connection often becomes disconnected. If symptoms persist after you solder the brake resistor connection... it is your board . This board is still available from Eppendorf or can be serviced at Sahara Simba Electronics

We fix Error 6 on Eppendorf 5424R. Reading your posts, Yes Error 6 is caused by Loose, Bad brake resistor. By replacing or soldering the brake resistor it will solve the issue temporarly and it will happen again. Repairing other parts and balancing should be done to ensure solving the problem.

3a8082e126