Magnetometer misalignment calibration issue

[katscan]

Hello

I am trying to calibrate the mag alignment with the 12-premeasured azimuth points, but the "UNCORRECTED COMPASS SHOTS FOR MAG ALIGNMENT CALIBRATION" only shows asterisks ("*") and no numbers or text. Pressing "Begin" and "New" doesn't do anything, but creates a new asterisk. I included a video showing the issue.

Can I take each shot manually using "CONTINUOUS RAW MAG & ACC" naming each one for each orientation and whether it's normal or upside-down? If so, what is the process after I have the files, and if not, is there anything else I can do? 

Rev C v3.20

Thank you

[Rag Rastin]

Afaik you have to touch touchscreen not buttons on the bottom - you are just toching in the wrong place.

Just push Begin and then somewhere on the screen above - there where are asterisks, get 12 shots, then push new and turn caveatron and contiue calibration

[caveatron-discuss]

Pressing begin, should turn on the laser. Then you point it at the known azimuth angle and tap the screen anywhere near the center and it will take a reading.

Joe

[katscan]

Yup, that was it haha

Thank you