Release: Caveatron Software 2.05

[Joe Mitchell]

Version 2.05 of the Caveatron software is now available here:

https://github.com/Caveatron/caveatron/tree/master/software

The biggest addition is support for the BuyDisplay 3.5" 480x320 touchscreen LCD. The variant supported is the one with the resistive touchscreen, 3.3V, and 16-bit, parallel 8080 header. The Font chip option is not used. It can be ordered here:

https://www.buydisplay.com/lcd-3-5-inch-320x480-tft-display-module-optl-touch-screen-w-breakout-board

The Caveatron_Setup program has not been updated yet to support this display, so setting up a Caveatron will have to be done manually until it is. Although it has a 2x20 pin header like the Coldtears display, the pinout is in a completely different sequence. A pin cross reference is provided in the documentation folder on Github. The hardware code display number is 4.

Two problems were recently identified by Ian Cooper and fixes are included in this version:

- The LRF Range calibration is now applied correctly in Shot and Manual modes
- The Manual Mode range toggle switch now turns off