caveatron-discuss

A new version of the Caveatron Setup utility is now available on Github. Version 1.2 adds support for

Version 2.05 of the Caveatron software is now available here: https://github.com/Caveatron/caveatron/

Version 2.04 of the Caveatron software is now available with some small fixes and changes. Fixed bug

Go to free of buildings place, flat, open space and make your own points with some wood sticks.

Hello, Not sure if you ever got the laser rangefinder to power on, but I've finally gotten around

Hello, all. At main site i had seen great examples. Where i can find tutorial or video of screen,

Hello I don't know if there is a failure on my part or if it is material, but the laser

I'm sorry to take so long to respond. I'm not sure I fully understand all the questions but

Watch here first: https://github.com/Caveatron/Caveatron/tree/master/RevC niedziela, 13 października

Hello Here is a Lidar protection dome for transport. It is simply held by an elastic band and stored

Merci pour les corrections. Dans PJ, les nouvelles connexions. Bonne journée Merci pour les

Thank you for putting in the time to get all that sorted out Joe! - Erik On Sat, Aug 3, 2024 at 2:41

Hey everyone, I was just wondering if there were any NZ cavers who have built a Caveatron? I am

Yup, that was it haha Thank you On Tuesday, June 11, 2024 at 9:11:40 PM UTC-4 caveatron-discuss wrote

Hi Joe Thank you for your help! My issues with the window size and data showing up are now solved by

If you downloaded the Bill of Materials since May 1, I apologize as it was not the version I intended

I'm just getting caught up here on old forum posts since I've been away. I'm afraid I

I'm getting caught up on old forum posts. Yes, batteries do have an inherent magnetic field but

Thank you for the help! Relieved to know that none of these things have any real use impact. On

Most likely you have problems either with teensy or LCD is connected the wrong way. I advise to

Hello and thank you for these clarifications. Bonjour et merci pour ces précisions. Le mar. 14 mai

I will have to investigate the code and see if there is an issue with LRUDs and the HEX version. I

Bonjour, je suis sur Narbonne, dans l'Aude, en France, spéléo depuis 30 ans je suis cette

Two new revisions of the Caveatron printed circuit board (PCB) have been released, Rev C.3 and Rev C.

Version 3.2.0 of the Caveatron firmware is now available on Github: https://github.com/Caveatron/

A couple of additional comments about the new release: When I referred to 3 significant digits above

Below is a diagram of how I intend to wire up the power switch which includes the JST pin connector

Hi, I definetly have lot of filter avilable and most likely will find 3x Socket Headers Please PM me

I have a ton of optical filter material. Where are you located? It's super light so I would

Ok thanks. Also when I import a survey and select the origin station, I can enter the origin UTM

I'm not sure what to say about this. I used that dome with an S2 to scan a cave 3 weeks ago and

hello i have some issues with the lastest version of the software 2.4.4 I try defining diferent tipe

Hi Michel, Could be a solution use this connector mounting it and soldering at the same face of the