Vba Reset Button
Germaine Greenweig
Hey @cj1410 talking with our team here and there is way to upgrade the firmware via microSD card but we would need to send you the firmware. We have seen people run into a few challenges with trying this method so we really have moved away from suggesting this a method. (just spoke with our team about it)
I think the best next step would be to contact our support team at www.kamihome.com/contact and inform them about your broken reset button. Let me know if you have any questions.
Hello, I have a similar problem w/ a brand new Yi 1080p Home. I cannot pair, I never hear the voice message, and reset button does nothing. Yellow light reamins, never blinks. Where can I get the firmware? On the official website firware for this model does not exist.
Hey @Arydwi As a cloud subscriber, you get a pretty customer-friendly replacement option. Contact support, let them know you a cloud subscriber, the button is broken and you want a replacement. Our team will get one out to you ASAP
okay, so I have decided to reset my Netgear Orbi due to a reason I went through today... I have a pin, paper clip, I held down for 10 seconds, 20 seconds, 30 seconds, even for one minute. I still get nothing, the light flashes white and I cannot get anywhere with it... I called Netgear Support and they told me I'd have to pay for their support for it's out of warranty... does anybody know how to solve this?
Perhaps there is a misunderstanding. When the end of a paperclip is stuck into the tiny "Reset" hole next to the power plug, the Power LED which is right next to the hole will turn from green to amber and then begin to flash. The "white light" is on top of the Orbi. Please look at these instructions: =cMw4ePACgc4
okay... for some reasons, I did see the led blink RED, it wasn't amber color... then it went back to green and the ring flashed white... I gave up and researched, it looks like it's bricked and it's possibly the firmware is corrupted...
However, the reset course content button is not visible beneath "export course content" on my side bar. How can I access this feature? I've included a screen shot of what I see, just to prove I am not blind or something.
I did look through the forums and haven't seen any threads by people with my exact issue, though I see lots of advice not to erase course content and posts asking people why in the heck they would want to do this. Note, the semester HAS NOT started yet, and I am asking because I copied the wrong course content into a course for an upcoming semester that does not currently have any students in it. I need to erase this so I can start over.
Many schools remove that button for safety reasons. The three I currently work for have, and before I retired as one school's Admin, we also removed it. You will need to contact your school's Canvas Admin to get your course reset.
We found this thread after searching for the same problem. However, we have not turned off the Reset Course Content link! It was active in courses but not in one in particular that was copied from a template. I figured out that if there is no text in the SIS-ID box, the Reset Course Content link does not appear. But when you put text in the SIS-ID, the Reset Course Content link appears! THAT is the issue here.
I'm sure you've already figured it out since your post was several years ago, but thought I would update in case others find this thread.
Kevin M.
Thanks Daniel! That helped to focus on the animation reset.
I found this from @JayChow Reset moveable points with action button
And I was able to adapt it to have two points reset when the button is pressed!
I know I can change the Properties when revisiting the slide to "reset to initial state," but I wanted to have the button right on the slide so learners don't have to do the PREV and NEXT thing to reset.
Further to this discussion, I have created a menu where the books disappear from a shelf which means I am required to set the slide to resume saved state. One all the books are gone, i'd like a button to come up that triggers the slide to be reset, ie have all the books come back onto the shelf. Is this possible?
With the slide set to "reset to initial state", every time the slide is revisited it will reset to its original state. I know everyone says to program another button to jump the same slide or some such nonsense, that's only necessary if the seek bar is hidden [because the pause and replay buttons are part of the seek bar]. But if the seek bar is not hidden and you have the replay button available, click the replay button and the slide will automatically reset each time; again, with the slide set to "reset to initial state". If you want to program/add a nifty button for fun, go right ahead, but it's not necessary. Cheers
Thanks for reaching out here with your question. There isn't a functionality to reset the entire slide from within a master - but perhaps you could share more about your set up here or even an example so that the community could weigh in with other ideas or solutions to assist you. In the meantime, if you enable the seekbar as part of your slide you'll be able to use the rewind button on the seekbar and it will behave as detailed here.
Is there a way to reset a slide back to initial state that has previously been set to resume state by way of a trigger and condition? I have a drag and drop slide that works as a menu to 5 quiz items so that when you drag an object onto a shelf it jumps to the first question slide. After that question is answered, the next button navigates back to the dnd slide upon which you drag another object onto the shelf which in turn takes you to question 2. After answering question 2 you click next to go back to drag and drop slide and drag another object onto shelf that takes you to question 3, and so on, and so on until 5 questions are completed. After those five are completed, the user can click on the next button on the drag and drop slide to take them to the results slide. Now, If they fail, I want them to be taken back to the drag and drop slide to do it again, and I can set that up with a retake quiz button on the fail layer in the results slide, however, since that drag and drop slide is set at resume save state, all of the dragged items are still on the shelf, and I want them to reset to their initial state or positions. Is there a way to set that slide to initial state from it's resumed state? With a condition met? I hope this makes sense.
I haven't yet seen a trigger/condition behavior to control the slide properties and reset it to an initial state, but that doesn't mean it can't be done...just that it's not something built-in to the functionality of Storyline. I'll be curious to follow along here and hope others can share some unique ideas! I always feel like anything can be done with Javascript...so we'll see. ;-)
I have a slider that I need to reset to initial. I created a reset slider button that triggers to jump to the same slide. Everything resets EXCEPT the button on the SLIDER aaaaahhhhhh. Any suggestions??
Hi there, Julie! Sliders rely on variables which remember values even when states are forgotten. Be sure to include a trigger to reset the slider variable value on that button as well. Tell me if that doesn't do the trick!
What I have done in the attached example is to jump to the same slide (as you did previously) when the Reset Slider button is selected. I have also created a trigger that sets Slider1 to zero when the timeline starts for the slide (see above). This then resets your slider.
Thank you so much! I Set Slider1 to 0.00 when the timeline starts and everything is resetting but the button on the slider just still stays at the end! Your slider works perfectly. Maybe I'll try a different slider options.
2. I copied my original slider from my first screen where I used sliders, to my subsequent screens, so the object appears as Slider 1 on all of my sliders, but the changes I set up in the triggers refer to whatever slider articulate is recognizing on that screen, for instance, slider 2. So, under my reset object button, I was setting it up to set slider 1 equal to 0.00 when timeline starts, but the slider on this screen is really slider 2 according to articulate. So I redid the reset to set slider 2 to 0.00 when the timeline starts and that did it.
Is there a way to disallow the user from sliding the slider button backwards? I have have the reset button option all ready to go, but if I drag the button backwards instead of using the reset button, all my triggers happen in weird order and it messes everything up until I hit the reset button again. I don't want the users to be able to drag it backwards. Any suggestions out there?
Hi Julie! I'm glad to hear you were able to work with the variables. Thanks so much for sharing your process for other folks. You might need to get creative to prevent users from sliding backward. I would consider:
c80f0f1006