Water pressure

[David Slider]

The water pressure from the nozzle in the kitchen sink is too low. Head water pressure is good. How do I adjust the water pressure for the kitchen sink nozzle?

Thanks.

David Slider
Mystic, #164

[Marvin Isgur]

Crud can accumulate at either end of the flexible hose and at the faucet handle itself. The faucet handle can be disassembled for cleaning, with a special tool.

> On Jun 16, 2025, at 3:02 PM, David Slider <dcsl...@gmail.com> wrote:
>
> The water pressure from the nozzle in the kitchen sink is too low. Head water pressure is good. How do I adjust the water pressure for the kitchen sink nozzle?

>
> Thanks.
>
> David Slider
> Mystic, #164
>

> --
> You received this message because you are subscribed to the Google Groups Catalina355 group. To post to this group, send email to catal...@googlegroups.com. To unsubscribe from this group, send email to catalina355...@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/catalina355?hl=en
>
> If changing the topic, please start a new message and send to catal...@googlegroups.com, rather than clicking "reply" to an existing message.
> ---
> You received this message because you are subscribed to the Google Groups "Catalina355" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to catalina355...@googlegroups.com.
> To view this discussion visit https://groups.google.com/d/msgid/catalina355/88D47380-2FB0-4350-9727-D1C946C5B005%40gmail.com.

[David Slider]

Thank you

> On Jun 16, 2025, at 3:06 PM, Marvin Isgur <kir...@sbcglobal.net> wrote:
>
> Crud can accumulate at either end of the flexible hose and at the faucet handle itself. The faucet handle can be disassembled for cleaning, with a special tool.

> To view this discussion visit https://groups.google.com/d/msgid/catalina355/06F5DC34-C156-47AD-A056-A1F0F4992968%40sbcglobal.net.

[Marvin Isgur]

You are welcome. I didn’t mention that there is a single pressure pump. So, the right water pressure must be being pumped or you wouldn’t get good pressure in the head. There is a possibility that one of your manifold valves is partially closed. If you open the floor board nearest to the sink and look towards the bilge, you will see three black handles. They should all be set wide open unless you have an odd configuration.

> On Jun 16, 2025, at 3:07 PM, David Slider <dcsl...@gmail.com> wrote:
>
> Thank you

> To view this discussion visit https://groups.google.com/d/msgid/catalina355/B8297772-4F3E-4DEA-A0A5-6F2A9077E5F4%40gmail.com.