Device Activate

1 view

Skip to first unread message

Vicki

unread,

Aug 4, 2024, 9:51:18 PM8/4/24

to caplisithin

HiI have the same problem trying Virtuoso with Cubox-i2, volumio-2.774, connected wifi through Fritz!box 7530.

The device list is empty.

I tried to change the DNS in the router setup page as well as in Volumio DNS settings as suggested in this topic with no results.

Thanks in advance for your help

Logs are showing login failures:

info: CoreCommandRouter::executeOnPlugin: my_volumio , setMyVolumioToken

error: MyVolumio FAILED LOGIN: A network error (such as timeout, interrupted connection or unreachable host) has occurred.

I was able get the device to show up. In my case, I have 2 routers daisy-chained together. The primary router is connected to the WAN (internet), and is supposed to be configured as a DMZ to allow all traffic to the secondary router. But I could only get it to work when I connected the volumio device to the primary router.

Via 24 monthly bill credits with qualifying trade on Go5G Next and Go5G Plus. Contact us before canceling entire account service or credits stop and balance on required finance agreement is due (e.g. $829.99 - iPhone 14 128GB). Bill credits end if you pay off device early. For well-qualified customers; plus tax & $35 device connection charge. Get full terms

Limited time offer; subject to change. While supplies last; participating channels only. Bring your own device activation, Protection ,360./Basic for BYOD insurance, and screen protector must be purchased in same transaction. Plus tax. Not valid on prior purchases or in combination with other offers/discounts for this accessory.

Limited time offer; subject to change. While supplies last; participating locations only. Accessories must be purchased in same transaction. Plus tax. Excludes clearance accessories ending in $.97 and tablet accessories. Limit 100 discounted accessories per account. Not valid on prior purchases or in combination with other offers/discounts for accessories.

You have to activate the device in the audible manager before you can use it to listen to Audible content. The audible manager is a windows only application so you will need a Windows machine to active the Jam with the Audible service.

Once the Jam has been activated it does not need to be done again. You can download the .aa files and drag and drop them to the Jam and they will work. If you ever format the jam the Licence file will be gone so in that case you would need to activate it again.

Hi, I also had plenty of issues.

Audible itself recommend using the AudibleSync App. But that one didnt work at all for me (could not log in).

The Audible App worked well, but didnt automatically recognize my Clip Sport Go 32GB device.

I then updated my firmware from 1.02E to 1.04.

I then tried the audible app again. and this time it worked and the mp3 was recognized right away.

If you're the Account Owner or Account Manager, you can add a line in My Verizon. Learn more about account access roles.

Note: For prepaid accounts, refer to our Prepaid Family Account FAQs for instructions on adding a line.

You may be able to bring your mobile number along when you bring your device to Verizon. Learn how at our Bring your number to Verizon FAQs.

Note: When you're bringing a phone number to Verizon, don't cancel your service with your other carrier until we've activated your new line.

When calling: deviceGrpcClient.activate( activateDeviceRequest, getAuthMetadata() )

Im getting

ERROR [ExceptionsHandler] 13 INTERNAL: Invalid string length

This comes from chirpstack, tried to look at chirpstack logs, but nothing more in there.

Lengths seems to be fine as when I do the same using Chirpstack UI and get these values over grpc - I can see that its the same.

Is there a problem in the grpc handler code or am I doing something wrong?

I am having difficulty with installing Bitdefender on additional devices. I have been able to install it on other devices in the past following the instructions online by sharing the link from central to the persons device no problem. However, now it requests that the user inputs the account credentials, which did not happen before and is not a step in the tutorial. The product is only activated after logging in on the other device.

Account sharing is a cybersecurity risk and the installation/activation of the product previously did not require the user to log in - the user simply clicked the link I sent them from Bitdefender central, downloaded and the product was activated.

I have noticed that in the Central account associated with the email address registered on the forum you have an active Antivirus Free for Windows license. Should you have a secondary Central account, kindly let me know in private and I will check the subscription status for you.

When installing protection on other devices, it is not necessary to enter the Central account credentials, as they belong to the account holder only and shouldn't be shared. The process hasn't changed, but it must be determined if the user that installs protection on their device using the link you have sent, also has an individual Central account associated with their email address. In this case, they should switch the account in the product, so that the antivirus can be synchronized with your Central account and draw its configuration from there.

I am also experiencing the very same problem right now. Around 2 months ago, I was able to successfully activate Bitdefender on a PC by just using the link generated from the Bitdefender Central (exactly as it is supposed to work).

The subscription information (of my own subscription/account) is visible in both the download page and in the Bitdefender installation client, prior to the installation. However, once the installation is finished, this "connection" to my subscription is lost and the Bitdefender client asks me to create a new account or sign-in to the existing one. The client is at that moment deactivated, of course (in the notification part of the taskbar, the Bitdefender icon is grey in comparison to being red when it's activated).

I did experience the same problem a year ago on another PC but at that time, I thought the issue was coming from a device itself and not really from Bitdefender. Now, I see that the problem in fact lies within the Bitdefender itself.

I can of course sign-in to my own account but that defeats the purpose of the remote activation functionality. And even more importantly, I am really not a fond of sharing my account credentials to other devices (if sharing to a friend or within a business).

How did you setup the sync on Windows 10? Did you set Dropbox as a sync target in Joplin on Windows 10 (check in the settings)? Or do you just use the file system as a target and you selected a Dropbox folder? The second is not working!

And a little word of warning: Please do a backup of your notes before you start the sync. From my understanding you have a important notes on Android and Windows? In that case please backup your notes before you sync them. It is unlikely but possible that you overwrite them.

I am sorry if I am very reluctant to give my information. This is due to my poor knowledge of English.

Right, the two Android applications use the same account. However, the synchronization only works with Android devices.

Linking the Windows files would be important to me.

My iPhone x has been used for about an year. Yesterday I erased all contents and settings, but then could not activate it. It always showed "Device unknown" after ran for a few minutes at the activation stage. I cannot use iTunes to activate it because the lightning port broken for no reason 3 days ago and now it won't respond to any cable coonection. Can anyone share some thoughts? Any would be really appreciated.

See this support document, If your iPhone, iPad, or iPod touch won't charge - Apple Support the section about checking for debris in the charging port to see if it is the port itself that is causing the issue if it is not responding to the cable. As far as restoring your device to factory, and not using iTunes, see this, Restore your iPhone, iPad, or iPod to factory settings - Apple Support but it is still better to use iTunes. If the device will not respond to the cable and iTunes, then schedule service with Apple Support. This may also help, If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

Thanks everyone. I took my iPhone X to the local repair. The guy showed me that my phone has no IMEI shown on the information page which was entered through the i button on the bottom right corner of the "Hello" page, and said that it was not right. He said the board might be damaged and there was nothing he can do (the lightning port and Face ID both had no function either). Apple said something similar and that I only have one choice which was buying a refurbished since my warranty was expired (10 days). Since it can't be activated my phone is completely no use now. I still had no clue how this was happened. I had really kept my phone in a pretty good condition. All of a sudden everything just shut down in a few days. Hope sharing this could help anyone.