Warning in simulator
13 views
Skip to first unread message
Collin333
Jan 31, 2023, 6:22:15 AM1/31/23
to CAMotics Users
What doe this warning mean?
WARNING:C:\Users\user\Documents\Cadcam\Grill\GrillFace.nc:643:Position after synchronized command unknown in simulator.
Here is where I get the WARNING in the Gcode.
G01 X-74.6125 Y1.5875G01 X0.0095
G00 Z1.2700
G00 X0.0000 Y0.0000 Z1.2700
M05
M00 (Change clamps to rear) <- any Gcode after this M00 triggers warning
M6 T1 <- this is line 643
G21
G90
G94
M03 S10000
G00 Z1.2700
G00 X0.0000 Y0.0000 Z1.2700
M03 S10000
(No. 2 Parallel pocket: Hole 2 End mill 1/8)
G00 X0.0095 Y-34.4170 Z1.2700
G00 Z0.5000
G01 Z-1.2700 F635
G01 X-41.7957 F1270
G01 Y-35.4457
G00 Z0.5000
G01 Z-1.2700 F635
G01 X-41.7957 F1270
G01 Y-35.4457
Any help is appreciated.
Reply all
Reply to author
Forward
0 new messages