CAMotics Users

Hi everyone, After struggling with CAMotics showing no toolpaths — and at first not even the stock —

Subject: CAMotics fails to load NC + no stock unless project & paths meet strict conditions (

And where is this at? Is it just a FreeCAD addon away? On Saturday, January 11, 2020 at 7:38:14 AM

UR welcome! Merry Christmas. jos...@cauldrondevelopment.com schrieb am Freitag, 19. Dezember 2025 um

I'm not quite sure what you're saying. My "top view" shows the workpiece from the

If I load a project using a workpiece consistent with my GCode file file (using automatic) the

I tested it with several versions but I can't see the cut simulation on the notebook or desktop

Not currently. See https://github.com/CauldronDevelopmentLLC/CAMotics/issues/315 On Monday, January

Hello, it's possible to add a bull nose cutter tool for the simulation ? that really help me if

I wrote a python script to create Camotics machines from X3D .xhtml files for my local Workshop 88

I'm a FreeCAD user, and after recommend by sliptonic in this video, to test it, when a install

Only the tool shapes described in the docs are currently possible. On Tuesday, May 21, 2024 at 4:55:

There is currently no lathe simulation mode. On Tuesday, January 30, 2024 at 11:00:25 AM UTC+2 vyla..

Hello, the change Log states Camotics is at Vers. 1.3.0 But on website there are only files for Vers.

Thank you so much, this is a big help. On Friday, December 29, 2023 at 1:05:47 PM UTC-8 jos...@

Thank you! I was "Reporting as SPAM" but I'm not sure if that did anything other then

I tried creating the symlink between libv8.so and libv8.so.3.14.5 Now starting Camotics in konsole, I

I checked (Get Info) and I have permissions On Tuesday, September 12, 2023 at 9:09:08 AM UTC-4 George

Greetings All, I notice there is a buildbot folder in the Git repository. I am curious it there's

How blocks of values are being generated while giving the ngc files as an input.

Why is that CAMotics doesn't currently simulate M48, M49, M50 and M51 codes that pertain to feed

I am very impressed with the features of the program. I am also using NC Discriminator and the old

i have come across the exact same problem. can the starting point other than (0,0,0) be changed in

I created a g-code in the inkscape program with 4 vectors, and I wanted to separate each one for a

Can I turn that vertical mill into a horizontal mill simulation?

I can't seem to find what the range is of the visualization for "S" values in my gcode.

What doe this warning mean? WARNING:C:\Users\user\Documents\Cadcam\Grill\GrillFace.nc:643:Position

After clicking on the full screen button the window freezes in full screen. Top row of buttons

No error messages. The workpiece bounds are Ok and manually set. The view shows: GCode::Tool Path

You have to define any tools you use in the tool table. This is described in the CAMotics