Digi Receiver

[Derrik Navarro]

Ineed to get the same data from two different sources.

I will collect them in a single station, but there is a problem with 2 senders transmitting to a receiver and separating this incoming data. What are your thoughts on the topic?

Experience the power of seamless wireless intercom, interpretation, and tour communications with Digi-Wave. Customizable to accommodate various settings and application needs, Digi-Wave transceivers and receivers allow users to adjust settings to precisely match their space and application needs. With advanced encryption technology, these wireless intercom systems ensure that your communication is interference-free and secure.

The Intelix DIGI-VGASD-IREYE IR Receiver is the perfect companion to the Intelix

DIGI-VGASD and the Intelix DIGI-V3SD. The receiver's small size and simple plug-in installation make it easy to set up.

Intelix DIGI-VGASD-IREYE receivers are used to receive IR signals and transmit them to Intelix DIGI-VGASD series extenders. DIGI-VGASD-IREYE receivers ensure full compatibility with Intelix twisted pair extenders, as well as the highest level of IR signal transmission accuracy.

Design excellence, high quality materials, meticulous workmanship, and superior service...put it all together and you get a superior product. Don't get stuck with bad advice, poor service, slow shipment or an inferior product. If you want the best, here it is.

This cost effective garage door radio receiver replacement kit from Digi Code includes the following (1) 5100 300 MHz 3 tab garage door receiver and (2) 5010 300 MHz single button visor remote controls. This garage door remote receiver kit provides a great option for those looking to replace an older receiver and remote without spending a fortune to do so.

Digi-Code's DC5100 is a 3-Tab Garage Door Opener Receiver operating on a 300MHz radio frequency. The 3-Tab design allows easy installation and quick connection mounting to most garage door openers. The DC5100 features an easy access hatch and 10 position dip switches that are easy to set with compatible remote control transmitters. This receiver from Action Industries accommodates power from any three-terminal operator, so no additional transformer or power adapter is required for installation.

The Digi-code DC5135 433 Mhz Receiver is in stock and available for purchase from Action Industries. The DC135 has Open/Close/Stop functionality and avoids interference with other Open/Close/Stop systems that use 300Mhz frequencies. The 433Mhz, heavy duty commercial garage door operator receiver has three independent relay outputs and easy programming with the "Teach/Learn" smart button. Pair the DC135 with Digi-Codes DC5035 Transmitter for reliable and dependable Open/Close/Stop performance.

Univox Digi RS-R is a digital bodypack receiver that can be used with assistive listening neckloop as well as headphones.

Digi RS-R is a part of the Univox Digi RS (Radio System) which is an easy-to-use FM system adapted for people with hearing impairment. The Digi RS system also consists of stationary and bodypack transmitters, delivering wireless high quality audio to ensure accessibility also to people with hearing impairment.

his Digi-Code model 5150 also known as the DC-5150 is a one channel, 12 or 24 volt, F-connector type antenna gate or garage door opener radio receiver that works with all Digi-Code, Multi-Code and Stanley remote controls that have 10 DIP type code switches on 300Mhz or 310Mhz. This radio receiver features auto voltage sensing for 12 or 24 volt AC or DC systems and can work on Multi-Code 300MHz or Stanley 310MHz frequencies by changing an internal jumper. The Digi-Code 5150 receiver can control one garage door opener or gate motor and can be used as a replacement or upgrade of older radio receivers. Having an F-connector type antenna allows for the antenna to be remotely located from the receiver using the optional Digi-Code 5166 remote antenna kit (sold separately) to obtain maximum receiver range especially if the receiver is located inside a metal enclosure that would block the remotes signal. This is a brand new item that comes in a plain white dealer box. Includes 8" wire antenna and programming instructions.

Product Features:

Activates one gate or garage door opener

Dual frequency can be set to either 300MHz or 310MHz mode by internal jumper

Auto voltage sensing no jumper needed to set operating voltage

4-Wire Connection

Ideal for use on gate openers

Optional remote antenna mounting kit for maximum range sold separately

One-Year manufacturers warranty

If you are not positive that this is the correct item for you, please email us. We are more that happy to assist you in determining the correct item for you. If you need to contact us for assistance please have the Make and Model number of the garage door opener, radio receiver or transmitter. We would rather have you contact us than end up with the wrong item and have to return it.

Go tetherless with Digitrax wireless operation. The UR90 is the IR receiver unit and allows your throttles to function much like a television remote with line of sight operation. All you need to make your Inrfa-Ready throttles tetherless.

The LNRP Xtra LocoNet Repeater Module Isolates and Protects LocoNet Layouts, it allows for greater expansion of the LocoNet system on large installations. The LNRP Xtra allows "protected" sections of LocoNet to continue functioning even when a fault occurs elsewhere, the LNRP Xtra automatically reconnects the faulty section once the issue is resolved. Now includes the PS14 power supply.

The Williams AV DLR 400 ALK receiver is for listen-only applications with the Digi-Wave tour guide system. An LCD screen displays channel, volume, battery level and RF signal strength. The DLR 400 ALK receives multiple presenters simultaneously during team presentations and it can be used with earphones, headphones or a neck loop. There is no limited to the quantity of receivers used on a system.

This website requires cookies to provide all of its features. For more information on what data is contained in the cookies, please see our Privacy Policy page. To accept cookies from this site, please click the Allow button below.

As you can see, apart from the power input connector, there are also two 3.5mm jacks for both video and audio. If you like listening to the motors during flight, you can do so now with your DJI FPV goggles :)

I wish there is a module bay cover you can put on when you have the receiver module removed. Also it would have been nice to have a power button too for the receiver module, when you are not using analogue you can switch it off to save some power. But I guess you can also just unplug the power cable to the analogue module, since the cable is just a splitter.

Nice, thanks for the reviews Oscar! I just picked up a set of new DJI FPV v2 goggles and have been using the original Far Shark Dominators from about 10 years ago so this setup is going to be a big step up for me! :)

My install went very nicely, however it will not allow me to select any channel in audience mode or any channel, other than ch8 in analog input mode. How can i use any of the other channels, since i fly with many others and one of them already uses ch8?

Hello Oscar, may I ask if you having the same issue? I am trying to change bands using rapidfire while looking into the goggles, the bands feed is loosing and will comeback to DJI logo again and again.

I may cut the ends of the plugs and solder right to the pads. luckily the plugs go all the way through so you wont have to remove them to run wires though. I may add a relay switch or button for power and position it right where the plugs are. not sure yet. Just received mine.

The Williams Sound DLR 50 DigiWave Receiver lets each member of your audience or congregation quietly listen-in to the translation broadcast using an earpiece, headphones, or the built-in speaker. The slim, lightweight design fits easily in your pocket and two standard AAA batteries will give you up to 24 hours of digital listen time with no annoying chargers to keep track of.

Note: All equipment we sell is for interpretation using a LIVE human interpreter/translator. There is nothing that I know of that exists now that is able to produce a good quality audio translation without a human interpreter.

DR400 DigiRod eliminates the need for grade rods when checking grades with a rotating laser. The all-in-one combination of a laser receiver with digital readout, laser distance meter, and built-in tilt sensor provide the information required to take rod-less, accurate grade readings, even at tilt angles up to 30 degrees.

The DigiRod emulates all rod types including Direct Reading (Lenker), Cut/Fill and Indirect grade rods up to 6 m (20 ft) long. The user simply places the laser distance meter spot on the location a grade check is required, picks up the rotating laser beam anywhere on the reception window, and the distance from ground to the rotating beam is measured and displayed. Errors due to rod math and out of plumb grade rods are eliminated. The rod-less grade checking system increases safety as workers do not have to climb down in trenches or lean over unstable excavation edges to obtain elevations.

As a stand-alone laser distance meter, the DigiRod is designed to give contractors a one-person distance measuring and estimating tool to measure remote and difficult-to-reach places such as high overheads, factory interiors, or over water.

The Laserometer provides a large LCD screen that gives a bright, clear digital readout of elevation and has 5 accuracy selections to match any jobsite tolerance requirement.

3a8082e126