cal46

Pictures of improved 46 rudder. From Finco/Foss Sent from my iPhone

I'm having work done on my rudder and wondered if anyone has access to drawings or specific

Spoke to a reputable sailboat Mechanic He said yes There should be a minimum of 2 bearings On the

Hi Nick My 1968 Perkins is 236U9850 The number can ca be found on the right side engine block (

Hi All If anyone is looking for a very experienced crew (over 10000 ocean miles) or a delivery for a

On Pacifica I have a Raymarine wheel pilot. Wanders like most but all in all I love it. Has had no

Hi Kevin I've had my Cal Cruising 46 (hull no 5 1968 year built ) for 16 years now, home port

Hi Kevin I've had my Cal Cruising 46 (hull no 5 1968 year built ) for 16 years now, home port

> Hi Kevin > I've had my Cal Cruising 46 (hull no 5 1968 year built ) for 16 years now,

Hello Charles My alternator in my cal cruising 46 came with a 120 amp alternator with the Perkins

I have a 50+ year Perkins 4.236 If I run at 1350 RPM I won't need to add oil at all Well maybe

I had a 4-236 in my Cal. But instead of doing a rebuild for $$$ and still having a 40+ year old motor

Just to update folks who may be interested , I have both chain plates removed. Both are in pretty

Thx for that Phil Something to consider Speaking of repower Did you use the same Perkins or a turbo

I have t had that problem God luck Edwin Sent from my iPhone On Nov 27, 2021, at 7:12 PM, Charles

I've not done this before but... Should be fine, make sure to ease the shrouds on the opposite

Hi I have the same sender and the mechanic suggested replacing it first but I believe it is more

On our Mark III, and 2-46 before that, the tiller worked fine. It was a bear to use, but we used it

I could do that, but easier, I think, to just remove the pump. Anyway, I've ordered the Sea Dog

Hi Steve, When I look at the page https://groups.google.com/g/cal46/ At the Top left side below

I just pulled out the chain plate. I'll get a new one made and mean time I'll be repairing

Took 2-46 from Miami through Panama canal, Galapagos, Marchesas, Australia, Singapore ending in

Hello fellow Cal 46 owners I have the original Cal 46 hull 5 with hailing port in Marina del Rey CA I

Hi Cal hull 5 cal cruising 46 built in 1968 Came with a Maxiprop folding They are based out of

Hi all Thanks for all the inputs My hull 5 original.cruising 46 has two stainless steal tanks each

Hello folks After 5 years of keeping the replacement cable in my engine room, I finally managed to

Wow Congrats Fantastic job That's just super Please send some pix Happy sailing Edwin S/V Lahlia

Would anyone like to share how the staysail sheets are rigged on their yacht? Im trying to figure out

This past spring I replaced the shaft and it was necessary to drop the rudder.

Hi Charles, So we now sheet off the top of the aluminum hard dodger. There's no reason you couldn