Help needed: anyone with 01v and lightpipe card!

[Robert L.]

I've installed a Dakota card and use it with a 01v digital mixer. I can
playback any recorded material, but just can't record! I guess anyone
using a 01v (Tom, Robert, Jim, anyone else... I promise I'll send you a
virtual bottle of wine!!! :-) Here's what I'm doing:

- in Cakewalk: Source = Dakota Left A:7-8, Port = A:1-2.
- On the 01V: swapped channels 1-8 and 17-24. (Global Swap)
- Guitar is plugged into channel 7 on the 01V (Also tried 8, just in
case...)
- SEL channel 7, went to VIEW, selected "D"...
- Armed the track in Cakewalk
- Everything seems fine in Dakota's Control Panel (3 green squares, sync to
internal and 01v is wordlocked to Option I/O)

..... but still don't get signal in Cakewalk...

I see signal on 01v though, channel 23 (from Option I/O window).

I also made sure "Playback device" and "Record device" within Cake's Audio
settings showed Dakota, rather than my Turtle Beach card...

I *must* be missing something, but I just can't see what and I'm really
getting frustrated... !!

(As if it could help, I have Cakewalk rebooting my entire system on 1
launches out of 3!!! But I guess this is another story, from what I've read
here about 8.04 crashing problems... Let's concentrate on the important
matter... I'll do like many after and simply reinstall 8.03.)

Thanks again,

--
Robert Landry
lans...@total.net

[Robert Solberg]

Okay, try this:
Change the track you're recording on in Cakewalk to "Source = Dakota A:1-2".
On the O1V, SEL channel 7 > VIEW and enable the number "1" under ROUTING.
Now open the CONSOLE view in Cakewalk, play your guitar, and see if you're
getting any signal.

[Jim Roseberry]

That should do it...

Jim Roseberry
Studio Cat Productions
Studio Cat Software (Audio software/Hardware)
1-888-873-8855
www.studiocat.com
J...@studiocat.com