Configure-follower Error Could Not Download Seed File From Master
Adele Morss
I have also faced the same issue with the elastic-search 7.6.2 version. The solution of the above-mentioned problem is, you just need to either add "discovery.seed_hosts : 127.0.0.1:9300" or set discovery.type: single-node in eleasticsearch.yml file to avoid the production use error.
I went back to my config.php to uncomment the lines regarding redis to then check the logs.
The few lines were gone, not even commented, just gone.
So i put them again (without the #) to load the 500 error.
But when i came back to my instance, i could access it and no more message regarding redis in administration panel.
Really weird.
So i guess my problem is solved.
Thanks guys for the help
[IDXCLUSTER:SEARCHHEAD_MULTISITE_ERR__S]
message = Site '%s' is not on the master's list of available sites. To fix, add it to the 'available_sites' attribute in the master's server.conf file.
severity = error
capabilities = list_indexer_cluster
[TIME_LINER:FETCH_ERROR]
message = Some events cannot be displayed because they cannot be fetched from the remote search peer(s). This is likely caused by the natural expiration of the related remote search jobs. To view the omitted events, run the search again.
severity = error
Hey, so I just had the same error, but it did not have anything to do with my path. I named my collection 'MongoBasics' in the first step instead of 'mongoBasics', all I needed to do was open the seed.js file and changed the line where it says
Inside the Mongo Shell you are running the load() command and using the path to the seed.js file as the parameter, or you have made sure that you are in the proper directory inside Mongo Shell to directly load the seed.js file. You can use the pwd() command from Mongo Shell to see the directory you are working in. And that you are using the mongoBasics database and not the default test database, that shouldn't matter, but from the standpoint of the course it might.
I git cloned the repo and copied the seed.js file to the mongod.exe folder, to be easier to load. Then on the mongo shell I ran the load('seed.js') command, and that's were I got the error you can see in my post.
make sure that inside the seed.js file the file name is the same as the db you created inside of mongo, That obviously can cause errors and prevent it from loading because your trying to get and drop a table that doesn't exist.
Migrations only considers model changes when determining what operation should be performed to get the seed data into the desired state. Thus any changes to the data performed outside of migrations might be lost or cause an error.
So as soon as de action account is removed from sysadmin role (this is an AD service account, not local System), even though the HealthService account is created and is sysadmin, the following Securables return error in the MP
I am getting following error message with latest SQL Agnostic MP. Could you please kind enough to help me with fix for same. Even i was trying to share screenshot of whole error message but could do it
I deployed the SSRS management pack briefly but saw these issues and figured it needed some deeper thought. We also collect login failures from SQL error logs and raise informational alerts in SCOM and this was quite chatty with SSRS servers failing to talk to SQL instances. Good to see you still bearing the torch of SCOM, I have used your advice and guidance since 2007, invaluable to us on-prem monitoring die hards.
I am running a Windows 11 laptop that has had no problem with Bitbucket for 7 months. I frequently push to the master branch of a repo that I own, for which I have Admin access. I began to get the following error:
I'm trying to upgrade from 6.7.1 to 7.0.0 but getting the below error. I changed discovery.zen.ping.unicast.hosts to discovery.seed_hosts and added also cluster.initial_master_nodes pointing to the same master nodes. What am I missing for this to come up?
I installed the 1st beta of El Capitan, and now I cannot update anything via software update, including OS X itself. I just get the "couldn't communicate with a helper application" error. I even reinstalled the OS, and Im still getting it. Anyone have any ideas? I tried manually installing via command line using "
I just had this happen to me and all of the recommendations weren't working. I tried so many things from checking updates, to restarting my computer, to checking my applications and making sure Xcode was up to date (it wasn't) and once that updated, the issue still wasn't fixed. I am running Monterey for my system and recently started backing up my files to iCloud. Last night was the first occurrence when I received the forsaken "couldn't find a helper application" error when trying to compress a file for class.
- despite this i managed to make some progress in that i managed to get a PnP device to get an IP from the DNAC IP pool, but after adding a helper address on the management vlan SVI on the seed it was then also issued an IP from the dhcp server.
- however i couldn't manage that device because apparently i need to have level 15 privileges to do this - which kind of beats the purpose to make it zero touch - but i manually configured credentials anyway on the PnP device and it was then fully discovered by dnac with the IP from the dhcp pool.
e.g. on another device it tries to initialise the device but on the console cli I get an error saying "the rollback configlet from the last pass is listed below" and attempts to rollback some previous config, despite me erasing the startup config, vlan.dat, flash, certs etc. and reloading the switch. Then in Plug and Play in DNAC it does pick up the new device but puts it into error state. Not sure what's going on there.
In this example, not only could we check that the checksum was correct, but we could also find it on the official website, which is why we changed the value of the of origin attribute on the sha512 element from Generated by Gradle to PDFBox Official site.Changing the origin gives users a sense of how trustworthy your build it.
This error message gives us the GAV coordinates of the problematic dependency, as well as an indication of where the dependency was fetched from.Here, the dependency comes from MyCompany Mirror, which is a repository declared in our build.
For example, here we use the setSimpleProperty() method to modify properties defined by setters in the Person class, which works fine.If we would attempt to set a property not existing on the class, we should get an error like Unknown property on class Person.However, because the error handling path uses a class from commons-collections, the error we now get is NoClassDefFoundError: org/apache/commons/collections/FastHashMap.So if our code would be more dynamic, and we would forget to cover the error case sufficiently, consumers of our library might be confronted with unexpected errors.
One use case for dependency substitution is to use a locally developed version of a module in place of one that is downloaded from an external repository.This could be useful for testing a local, patched version of a dependency.
Similar to the ambiguous variant error, the goal is to understand which variant should be selected. In some cases, there may not be any compatible variants from the producer (e.g., trying to run on Java 8 with a library built for Java 11).
The result of this algorithm has the following deterministic bound:If the DataFrame has N elements and if we request the quantile atprobability p up to error err, then the algorithm will returna sample x from the DataFrame so that the exact rank of x isclose to (p * N). More precisely,
Because MCS creates many machines from a single image, some steps are performed to ensure that all machines are unique and correctly licensed. Image preparation is a part of the catalog creation process. This preparation ensures that all provisioned machines have unique IP addresses and correctly announce themselves to the KMS server as unique instances. Within MCS, image preparation occurs after selecting the master image snapshot. A copy is made to enable the catalog to isolate itself from the selected machine. A preparation VM is created, based on the original VM, but with the network connection disconnected. Disconnecting the network connection prevents conflicts with other machines, while ensuring that prepared VM is only attached to the newly copied disk.
If the VDA 7.x is not installed on the master image, then image preparation times out after 20 minutes and report the above error. This is because there is no software installed on the master image to run the image preparation stage and report success or failure. To resolve this, make sure the VDA (minimum version 7) is installed on the snapshot selected as the master image.
@arturn Thanks for the reply and pointing out a potential issue. I switched to DQN to check if the problem may exist because my env returns are faulty, but everything works fine there. I will try to switch from 2.1.0 to master and in case this breaks my whole project i will wait for 2.3.0 and check there.
Make sure when you run the seeding perms each node is primary replica. I had the auto seeding working aross 4 node replica systems flawlessly. I used POSH to auto deploy the perms. Also land the 6 busiest databases first in the AG group. We automated SQL to pickup new databases and slap them into the auto seeding. We also automated if one comes out of sync to remove from all secondary replicas and then re send across. This also worked flawlessly.
The DRBG is not used directly by the application, only for reseeding the two other two DRBG instances. It reseeds itself by obtaining randomness either from os entropy sources or by consuming randomness which was added previously by RAND_add(3).
9738318194