[commit] BSDanywhere - r234 - branches/stephan

[bsdan...@startek.ch]

Author: stephan
Date: Tue Nov 11 16:54:58 2008
New Revision: 234

Log:
Integrate 4.4 sysctl.conf file. Enable kbdreset.

Modified:
branches/stephan/etc_sysctl.conf.tpl

Modified: branches/stephan/etc_sysctl.conf.tpl
==============================================================================
--- branches/stephan/etc_sysctl.conf.tpl (original)
+++ branches/stephan/etc_sysctl.conf.tpl Tue Nov 11 16:54:58 2008
@@ -1,46 +1,36 @@
-# $OpenBSD: sysctl.conf,v 1.46 2008/01/05 18:38:37 mbalmer Exp $
+# $OpenBSD: sysctl.conf,v 1.46 2008/01/05 18:38:37 mbalmer Exp $
#
# This file contains a list of sysctl options the user wants set at
# boot time. See sysctl(3) and sysctl(8) for more information on
# the many available variables.
#
-#net.inet.ip.forwarding=1 # 1=Permit forwarding (routing) of IPv4 packets
-#net.inet.ip.mforwarding=1 # 1=Permit forwarding (routing) of IPv4 multicast packets
-#net.inet.ip.multipath=1 # 1=Enable IP multipath routing
-#net.inet6.ip6.forwarding=1 # 1=Permit forwarding (routing) of IPv6 packets
-#net.inet6.ip6.mforwarding=1 # 1=Permit forwarding (routing) of IPv6 multicast packets
-#net.inet6.ip6.multipath=1 # 1=Enable IPv6 multipath routing
-net.inet6.ip6.accept_rtadv=1 # 1=Permit IPv6 autoconf (forwarding must be 0)
-#net.inet.tcp.rfc1323=0 # 0=Disable TCP RFC1323 extensions (for if tcp is slow)
-#net.inet.tcp.rfc3390=0 # 0=Disable RFC3390 for TCP window increasing
-#net.inet.esp.enable=0 # 0=Disable the ESP IPsec protocol
-#net.inet.ah.enable=0 # 0=Disable the AH IPsec protocol
-#net.inet.esp.udpencap=0 # 0=Disable ESP-in-UDP encapsulation
-#net.inet.ipcomp.enable=1 # 1=Enable the IPCOMP protocol
-#net.inet.etherip.allow=1 # 1=Enable the Ethernet-over-IP protocol
-#net.inet.tcp.ecn=1 # 1=Enable the TCP ECN extension
-#net.inet.carp.preempt=1 # 1=Enable carp(4) preemption
-#net.inet.carp.log=1 # 1=Enable logging of carp(4) packets
-#ddb.panic=0 # 0=Do not drop into ddb on a kernel panic
-#ddb.console=1 # 1=Permit entry of ddb from the console
-#fs.posix.setuid=0 # 0=Traditional BSD chown() semantics
-#vm.swapencrypt.enable=0 # 0=Do not encrypt pages that go to swap
-#vfs.nfs.iothreads=4 # Number of nfsio kernel threads
-#net.inet.ip.mtudisc=0 # 0=Disable tcp mtu discovery
-#kern.usercrypto=0 # 0=Disable userland use of /dev/crypto
-#kern.splassert=2 # 2=Enable with verbose error messages
-#kern.nosuidcoredump=2 # 2=Put suid coredumps in /var/crash
-#kern.watchdog.period=32 # >0=Enable hardware watchdog(4) timer if available
-#kern.watchdog.auto=0 # 0=Disable automatic watchdog(4) retriggering
-machdep.allowaperture=2 # See xf86(4)
-#machdep.apmwarn=10 # battery % when apm status messages enabled
-#machdep.apmhalt=1 # 1=powerdown hack, try if halt -p doesn't work
-#machdep.kbdreset=1 # permit console CTRL-ALT-DEL to do a nice halt
-#machdep.userldt=1 # allow userland programs to play with ldt,
- # required by some ports
-#kern.emul.aout=1 # enable running dynamic OpenBSD a.out bins
-#kern.emul.bsdos=1 # enable running BSD/OS binaries
-#kern.emul.freebsd=1 # enable running FreeBSD binaries
-#kern.emul.ibcs2=1 # enable running iBCS2 binaries
-#kern.emul.linux=1 # enable running Linux binaries
-#kern.emul.svr4=1 # enable running SVR4 binaries
+#net.inet.ip.forwarding=1 # 1=Permit forwarding (routing) of IPv4 packets
+#net.inet.ip.mforwarding=1 # 1=Permit forwarding (routing) of IPv4 multicast packets
+#net.inet.ip.multipath=1 # 1=Enable IP multipath routing
+#net.inet6.ip6.forwarding=1 # 1=Permit forwarding (routing) of IPv6 packets
+#net.inet6.ip6.mforwarding=1 # 1=Permit forwarding (routing) of IPv6 multicast packets
+#net.inet6.ip6.multipath=1 # 1=Enable IPv6 multipath routing
+net.inet6.ip6.accept_rtadv=1 # 1=Permit IPv6 autoconf (forwarding must be 0)
+#net.inet.tcp.rfc1323=0 # 0=Disable TCP RFC1323 extensions (for if tcp is slow)
+#net.inet.tcp.rfc3390=0 # 0=Disable RFC3390 for TCP window increasing
+#net.inet.esp.enable=0 # 0=Disable the ESP IPsec protocol
+#net.inet.ah.enable=0 # 0=Disable the AH IPsec protocol
+#net.inet.esp.udpencap=0 # 0=Disable ESP-in-UDP encapsulation
+#net.inet.ipcomp.enable=1 # 1=Enable the IPCOMP protocol
+#net.inet.etherip.allow=1 # 1=Enable the Ethernet-over-IP protocol
+#net.inet.tcp.ecn=1 # 1=Enable the TCP ECN extension
+#net.inet.carp.preempt=1 # 1=Enable carp(4) preemption
+#net.inet.carp.log=1 # 1=Enable logging of carp(4) packets
+#ddb.panic=0 # 0=Do not drop into ddb on a kernel panic
+#ddb.console=1 # 1=Permit entry of ddb from the console
+#fs.posix.setuid=0 # 0=Traditional BSD chown() semantics
+#vm.swapencrypt.enable=0 # 0=Do not encrypt pages that go to swap
+#vfs.nfs.iothreads=4 # Number of nfsio kernel threads
+#net.inet.ip.mtudisc=0 # 0=Disable tcp mtu discovery
+#kern.usercrypto=0 # 0=Disable userland use of /dev/crypto
+#kern.splassert=2 # 2=Enable with verbose error messages
+#kern.nosuidcoredump=2 # 2=Put suid coredumps in /var/crash
+#kern.watchdog.period=32 # >0=Enable hardware watchdog(4) timer if available
+#kern.watchdog.auto=0 # 0=Disable automatic watchdog(4) retriggering
+machdep.allowaperture=2 # See xf86(4)
+machdep.kbdreset=1 # permit console CTRL-ALT-DEL to do a nice halt