Exponer replacement temp probe

17 views
Skip to first unread message

Andrey Sychev

unread,
Mar 12, 2022, 12:21:21 AMMar 12
to via Brewtus
Found that native Expobar temperature probe on Amazon. Does that look like something that would work on Brewtus 2?

EXPOBAR 60100076 The temperature probe TEMPERATURE PROBE 1/4"M

https://www.amazon.com/dp/B07QKZB66L/ref=cm_sw_r_em_api_glt_i_6M3SPDNKKTRZ17JAXXFK?_encoding=UTF8&psc=1


Sent from my iPhone

Herman Dickens

unread,
Mar 12, 2022, 10:16:20 AMMar 12
to bre...@googlegroups.com
It should work but I've never tried one.

Herman


--
You received this message because you are subscribed to the Google Groups "Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/7BA30108-2F36-4401-B44D-D7992FB4B752%40aol.com.

Rob

unread,
Mar 12, 2022, 7:22:14 PMMar 12
to Brewtus
Looks like maybe but the connector on the end wouldn't be right for mine, I needed bare wires.  Whole Latte Love's website says that part number is for the PID version. 

Andrey Sychev

unread,
Mar 12, 2022, 9:06:15 PMMar 12
to bre...@googlegroups.com
True, in fact they don’t list a probe for AKO controller at all. I reached out to their support but so far they have been less than helpful. Meanwhile I ordered a thermometer that screws into the brew head to monitor temperature at the puck.

Sent from my iPhone

On Mar 12, 2022, at 7:53 PM, Rob <krob...@gmail.com> wrote:

Looks like maybe but the connector on the end wouldn't be right for mine, I needed bare wires.  Whole Latte Love's website says that part number is for the PID version. 
--
You received this message because you are subscribed to the Google Groups "Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+u...@googlegroups.com.

Andrey Sychev

unread,
Mar 12, 2022, 9:19:29 PMMar 12
to 'Andrey Sychev' via Brewtus
Basically WLL latest recommendation is upgrading to PID or replace the relay now and upgrade to PID when it’s in stock. What’s been the consensus on PID upgrade?

Sent from my iPhone

On Mar 12, 2022, at 9:06 PM, 'Andrey Sychev' via Brewtus <bre...@googlegroups.com> wrote:

True, in fact they don’t list a probe for AKO controller at all. I reached out to their support but so far they have been less than helpful. Meanwhile I ordered a thermometer that screws into the brew head to monitor temperature at the puck.
Reply all
Reply to author
Forward
0 new messages