Brewtus

hi Ira, took some pictures of the Giemme control board this weekend. Tested the pins underneath for

hi Ira, took some pictures of the Giemme control board this weekend. Tested the pins underneath for

Hello all, long time! Hope all are well; I still lurk this group even though my Brewtus 2 is long

I am Swedish and my english is not perfect when it comes to stuff like this so I had to google GFCI.

Made 3 shots in the morning. Wife made a shot, then... strange in our house.. she made a steamed milk

Hi Ira, thanks for the reply- I deleted the original post as I had since decided to replace them

Woah. Amazing! Thank you :) On Jul 20, 2022, at 7:46 PM, Bruce in Winnipeg <bewiebe@shaw.ca>

Hello Mike, Wednesday, July 13, 2022, 9:38:11 PM, you wrote: Anyone has an idea why the second one is

Do a google search on “expobar brewtus pressurestat” and you'll see a bunch for sale. JP From:

I have an issue where my steam boiler overfills. When I turn on the steam wand, liquid water comes

Also, I don't know how to read this wiring diagram for wire 8 and 9 - it seems that existing

Not sure I can answer that. It would seem logical that you would need a new Controller due to PID

Basically WLL latest recommendation is upgrading to PID or replace the relay now and upgrade to PID

I used my AstroAI multimeter that also came with a K type temperature sensor. Interestingly enough

I had forgotten I started this thread. I got a Crem One Profiler. Very nice machine. Can do pressure

I tried both VST and IMS baskets with my Brewtus II and also with my new Crem One Profiler. It can

I just replaced pid and the spade connector insulation was crispy like yours. .I recovered the spades

If you search for the brewtus Control Board Retrofit you get a great PDF that shows you the wire

Hi all, When I got my machine (used) it'd had the front metal "EXPOBAR" decal/logo

Managed to undo the bolt and as expected, brew gauge line opening was completely blocked by white

Interesting deign decision. Thanks for the photo. Sent from my iPhone > On Jan 25, 2022, at 10:18

Ordered pid. Tracking said it was stuck at WLL "severe deliver delays". Then it was

Good news - I connected the steam boiler (noticed red/blue stems) and machine heated up. Turned on

Dec 6th, 2021 Update: I've ordered a new heating element for the Brewtus IV-R's steam boiler

My Brewtus III brew boiler won't heat up. Steam circuit works fine and heats as normal and cycles

Thanks all - it's out. Chatted with WLL tech. He suggested that the element may bend when it

I had a similar problem. A wire had slipped out of pid. It should have gone to another pid socket

Hi all, just bought a Brewtus III (red PID), and the brew boiler won't heat up on it. Steam

Thanks so much for this suggestion! We unscrewed all the parts and soaked them in the descaling

For what it's worth: I removed my steam boiler completely and secured it to a rig (so thst i