Brennan Forum

Richard, I just noticed your reference to MP3 media. Perhaps a greater improvement in sound quality

The "line out" and the "optical out" share the same socket. With "line out

Hi Eric What is the reason why you can't locate the B2 near the Quad? Fred On Wednesday, 20 April

Thanks Daniel, according to B&O forums you can connect either a 5 din or 7 din into the B&O.

Thank You all for the information and encouragement. Have purchased a DAC/preamp w/ optical input and

Something to note (not a problem): the B2 has quite a low "line out" signal. You will

Just as a follow up to the thread, I don't think that the input from Aux. In goes through the B2

Hi Thomas Martin Brennan here. I think I'd like to address two points The B2 "line out"

Or you could use a Bluetooth dongle if it's within range On Monday, 14 February 2022 at 21:57:14

Thanks Paul, I appreciate it. I did turn on HDMI while listening through line out, and indeed, it did

Wow! So much information provided. My Brennan only goes up to a maximum volume of 64 (is that right?)

Or, just get a 3.5mm plug to RCA lead, for a couple of quid off E bay 1m 3.5mm Male jack to 2 rca

The B2 back has a combined headphone and optical output port The optical cable you need will need to

Daniel Thanks..that worked fine Todd On Wednesday, January 5, 2022 at 11:54:24 AM UTC-7 Daniel Taylor

I have a Quad 606 system (preamp, poweramp and ELS speakers) and the B2 works OK for me. I use the

Hi Zac, If I remember correctly the connections for an XLR are - Pin 1 = GND Pin 2 = Signal + Pin 3 =

Hi Richard, If you are wanting to use the digital audio out from the B2, you'll need an external

Did it work, though!!?? On Monday, 30 August 2021 at 11:00:46 UTC+1 Christian Sunderland wrote: Hi

HI gmo..., That's great, thanks for letting us know. Paul Brennan Support. On Tuesday, August 24,

Hi Arthur, So format the 1TB HDD, as Daniel suggests and then copy the music to the HDD again. The B2

Hi All, Some Bluetooth transmitters, like those from Avantree, Blitzwolf (and others) have an optical

The rim of the jack needs to be flush with the outside back of the hole. Then no matter the shape of

Hi All, I don't have access to the schematics for the B2 but suspect that the Line Out is

What do you mean by " Trying to understand how to load an SD card from the Brennan B2 "?

Hi Sue, If the SoundTouch has a Line In or Aux In it can be connected via a cable to the B2. Paul

Result ! :) On Wednesday, June 2, 2021 at 3:06:59 PM UTC+1 tony...@gmail.com wrote: So walked away

Since the HTA100BT has an optical input, you can use a fiber optic cable to connect the B2 to the amp

Yes the amplifier outputs on the B2 are bridged as Mark describes. Paul Brennan Support. On Wednesday

Many thanks John On Thursday, May 13, 2021 at 11:33:16 AM UTC+1 JFBUK wrote: Hi Sean, you may find

Many thanks for all the helpful feedback from all concerned. Very helpful. N On Friday, 2 July 2021