Brennan Forum

..obviously in the Spotify app I was selecting the music from, not on the B2 or in the UI.

Hi Dan, Please use our new Forum - link - for any new questions. It sounds like the B2's

Hi Al, I have replied to your other post and will look out for your email. Paul Brennan Support. On

Hi Al, If the red and green LEDs are flashing constantly it means the B2 is having problems loading

Hi Alexander, Yes, you can flash a new SD card on a Mac. 'balenaEtcher' is available for PC

Hi Peter I've just got back to looking at the issue again and I think you're right that the

Thank you John. Just does not explain why the same Reader worked for the 200GB microSD but would not

Hi Gary, Now that we know that the base version works, you could now run the 'Web Upgrade'.

Hi future..., Email us on - thebrennanb2 @ gmail . com - no spaces, with your address and requesting

Well done! Paul's advice on how to power off is important. Also in the good advice set is: 1) do

Ok …I got my nerve up and swapped out the SD card…after updating my last backup…..everything

Hi Roger, Yes, Red&Green flashing happens as part of the boot process and quite normal. However,

Thank you so much Peter. As you swiftly spotted, I was trying to flash the downloaded experimental

(Sorry about the break in post, my Bad!). unfortunately with the Raspberry Pi used in the B2 it is

Hi Janice, Are you using thebrennanb2 @ gmail . com leave out the spaces? I'll email you from

Hi Mark K, Please email us on - thebrennanb2 @ gmail . com - no spaces, with a brief description of

Hi Simon, Please email us on - thebrennanb2 @ gmail . com - no spaces, with a delivery address and we

That is not the point. When using Etcher the SD Card does not need to be pre formatted, Etcher does

Hi N, Download the image file shown on the Techy Stuff page - New SD Card - Make sure it is called

Hi Dan, Please email us on - thebrennanb2 @ gmail . com - no spaces, with a brief description of the

Hi John. You can re-flash your existing SD card by going to this webpage and following the

Hi Glenn, That's good. Maybe try playing a few Tracks, to make sure all is OK, before loading too

just had an email from tracy at audiotech to arrange for pick up of unit for repair so i`ll let the

Hi robcamp..., Please email us on - thebrennanb2 @ gmail . com - no spaces, with a brief description

Hi Daniel, Your suggested method will provide some information and is worth running as it is easy to

Hi Rob, I really didn't know anything about it, other than I thought there was such a thing. I

Hi ianir..., Please email us on - thebrennanb2 @ gmail . com - no spaces, requesting a replacement SD

Hi harlond57, Thanks for letting us know; this infomation is useful for other forum users. Glad that

Mission accomplished. Thanks everyone On Sunday, August 29, 2021 at 7:01:37 AM UTC-4 Mike W wrote:

Hi Paul, The issue was at Linux level, where Linux was mounting the root file system (located on the

Hi Crispy..., Might be worth explaining the original problem more before diving into SD Card