Connection to older hifi system

[Jonathan Lines]

Hello,

The Aux In on my (old but v. good) hifi system is a female DIN socket. Could you please advise how I would connect the B2 to it.

Thanks

Jonathan

[Daniel Taylor]

Does your DIN socket have 5 pins?  If so, then maybe something like this will work:

5-Pin DIN-Male Cable, 5 Pin Din to 3.5mm(1/8in) TRS Stereo Male Jack Stereo Audio Cable

I just searched for "3.5 mm to DIN cable."  You can too.

[JFBUK]

Hi Jonathan,

is the aux the only free input on your Hifi ?

John

[Daniel Taylor]

I have learned that not all DIN connectors are wired the same.  Perhaps your owner manual will tell how the DIN socket is wired.

[Jonathan]

Hi John, Yes it is the only one. The system is a B&O.

[Jonathan]

Thanks Daniel, according to B&O forums you can connect either a 5 din or 7 din into the B&O. The only difference is that the 7 DiN would be recommended if the connection was between two B&O units. I was surprised (in a good way) that the recommendation was as simple as the 3.5mm Jack. Thank you