Remote control

50 views

Skip to first unread message

gary monaghan

unread,

Jul 8, 2020, 1:35:19 PM7/8/20

to Brennan Forum

My question is simple if you have 2 b2 units is it possible to use the remote controls for each unit without activating the second one in other words can you set the remote to operate it's corresponding unit without it working the two ? Cheers

Mark Fishman

unread,

Jul 8, 2020, 6:50:50 PM7/8/20

to Brennan Forum

> if you have 2 b2 units is it possible to use the remote controls for each unit without activating the second one

Put the two B2 units far enough apart that when you point the remote at one, it isn't pointing at the other.

I had two VCRs that used the same remote -- the issue is the "spread" of the signal from the remote. The further away you are from the unit, the further apart the units have to be so one remote isn't "seen" by both units.

> in other words can you set the remote to operate it's corresponding unit without it working the two