RE: PSK31 on HTX100

[John Rehak]

Since it worked fine with the Icom rig, that points to the HTX100 transmitter as the likely problem.  It could be a ground loop or mismatch, but since you are using a commercial interface it still looks to me like the HTX100 transmitter .... Maybe try to get a local to listen to it on SSB and see if THAT sounds ok ...?

On Nov 19, 2011 11:13 PM, <bps...@googlegroups.com> wrote:

  Today's Topic Summary

Group: http://groups.google.com/group/bpsk31/topics

• PSK31 on HTX-100 [3 Updates]

 PSK31 on HTX-100

John Rehak <n6hi...@gmail.com> Nov 19 10:02AM -0700  

Hi Harold,
 
I might be able to help (or others in this group). Can you answer:
 
(1) Are you SURE you are not overdriving the rig?
(2) Does the HTX-100 transmit and receive OK on SSB?
(3) Does your set up RECEIVE PSK31 OK but only has transmit problem?
(4) What is interface and software?
(5) Version of Windows? or Mac?
 
Hope we can help you in the group! :-)
 
73 John N6HI


 

Harold Adams <paulo...@gmail.com> Nov 19 10:34PM -0500  

Hi John thank you for your response and help.
I will answer by # of question.
 
1--as far as overdriving don't know. Have set Tx audio according to the
software and also the comport. Tried on 25 watts and 5 watts.
2--Radio rcv is good. only had 1 qso and that was field day.
3-- yes
4--digipan and the rascal II a+
 


 

Harold Adams <paulo...@gmail.com> Nov 19 10:40PM -0500  

> 2--Radio rcv is good. only had 1 qso and that was field day.
> 3-- yes
> 4--digipan and the rascal II a+
 
5-- windows xp pro sp 3....on a dell 1501 laptop
 
did test with friend and I rcv him on psk clearly with 2 watts out. He
heard jibberish and a very erratic choppy copy of my signal. Have tried to
have many qso's on voice no luck.....psk the same.
I also borrow an icom 713 rig and used my rigblaster. signal was
heard 1441 miles away in the midwest with 7 watts out.
 
Thanks again
Harold
w2aco
 


 

You received this message because you are subscribed to the Google Group bpsk31.
You can post via email.
To unsubscribe from this group, send an empty message.
For more options, visit this group.

--
http://bpsk31.com
 
You received this message because you are a member of the bpsk31.com discussion list.
 
To post to this group, send email to bps...@googlegroups.com
 
To unsubscribe from this group, send email to bpsk31+un...@googlegroups.com
 
For more options, visit this group at
http://groups.google.com/group/bpsk31?hl=en?hl=en