Interbase password bug

[Dan Palley]

A customer reported a problem creating an Interbase password that starts
with a question mark. I tested in IB Console with IB 7.1 and was able to
duplicate.

When changing the password, I get the following error:

Unable to modify user account
No parameters allowed for this operation

The problem only occurs when the password starts with a '?'. Putting '?' in
any other position within the password works fine.

I tried to enter in QC, but could not get to the Server section of
Interbase. Got the following:

An error occurred in the application:
The exception type is:
XmlException
The message that came along with the exception is:
' ', hexadecimal value 0x04, is an invalid character. Line 1, position
28482.

Here's the direct link:

http://qc.borland.com/wc/qcmain.aspx?da=2117

Thanks,

Dan

[Robert Schieck (TeamB)]

Try this link as it should get you where you want to go:

http://qc.borland.com/wc/qcmain.aspx?d=29521

hth

Rob

.ps I will dig out the data scrubber and get the data fixed....

Dan Palley wrote:

> Here's the direct link:
>
> http://qc.borland.com/wc/qcmain.aspx?da=2117
>
> Thanks,
>
> Dan

--
Rob Schieck (TeamB)

[Robert Schieck (TeamB)]

Dan Palley wrote:

> An error occurred in the application:
> The exception type is:
> XmlException
> The message that came along with the exception is:
> ' ', hexadecimal value 0x04, is an invalid character. Line 1,
> position 28482.
>
> Here's the direct link:
>
> http://qc.borland.com/wc/qcmain.aspx?da=2117

Fixed and thanks for the QC report

--
Rob Schieck (TeamB)

[Dan Palley]

"Robert Schieck (TeamB)" <rsch...@mers.com> wrote in message
news:4582...@newsgroups.borland.com...

> Dan Palley wrote:
>
>> An error occurred in the application:
>> The exception type is:
>> XmlException
>

> Fixed and thanks for the QC report

Thanks, Rob.

Dan