Watlow Ez-zone Configurator Download

0 views

Skip to first unread message

Nevada Biernat

unread,

Dec 30, 2023, 9:58:02 PM12/30/23

to bocozazo

As I mentioned above, when I tried using the Ez-zone configuratator, the program was unable to find my controller even though I had the controller Comm set to Standard (as directed by a watlow customer service rep) and the port set to Comm4.

I guess I missed that you tried the Watlow made configurator program. But if you are not able to get that to work you will definitely have issues trying to get any LabVIEW code to work. One question is why are you using a 25 to 9 dsub connector? Why not go directly to the pins on the usb converter?

watlow ez-zone configurator download

Download File https://t.co/nl9jofr3SK

Hello, I am having the same issues with my incubator. I know this was posted a while ago. What driver do I need to install in order for EZ-Zone configurator to communicate with the incubator? The link to the above post does not work. We have made sure the USB - 9pin wire works, and we have fixed the wiring from the comm port to the controller. The EZ-zone configurator is not recognizing any devices.

EZ-Zone configurator software is provided on a CD so that you can set up your controller from your computer in one simple process. EZ-Zone configurator can be used for on-line and off-line configuration and downloading previously saved setups. The Watlow standard bus communications is provided for the EZ-Zone configurator software only.