Ed / Mauricio,
Just reporting back.
The specification of inits = "simple" worked for the signs of the loading on the factors.
I then used inits = "prior" and specified some different priors and also added both
std.lv and std.ov to TRUE as I wanted to use standardized priors. This then again had a lot of warnings, but this was my mistake due to the priors as I never set intercept priors and they were the standard (0,35), but setting them to (0,1) worked for the model.
Then I tried a model with specific standardized priors on the loadings to say, well I know all these loadings are positive. The prior on the loadings of (.5,.5) caused trouble for these factor loadings as I got warnings and bad Rhats, so I also tried (.5,.15) and these presented no problems after the estimation.
Lastly, I added approximately zero cross-loadings with (0,.05) and (0,.01) and both of these were bad on the cross-loadings. I then changed this to (0,.10) and the model worked. I also tried a model with a higher expectation of the second-order factor loadings (.7, .15) and this also worked.
Thanks!