Re: Config BlackParrot flash on VC707 FPGA

[Daniel Petrisko]

Hi Lap, 

Can you clarify what inputs and and outputs you’re talking about?

Best,

-Dan

On May 23, 2024, at 12:49 AM, Lap Dang <lap...@gmail.com> wrote:

Hi team,

Can I build RTL of BlackParrot core?

Được gửi từ iPhone của tôi

Vào ngày 13 thg 4, 2024, lúc 17:52, Lap Dang <lap...@gmail.com> đã viết:



Hi Dan,

Thank you for your response.

1. I go to the example folder and try 'make' but seem NOT effective. Can I build bitstream in Vivado GUI?

<image.png>

2. I am really a newbie so I don't know how to modify it. Can you have a detailed guideline?

Thank you so much,

Lap

Vào Th 7, 13 thg 4, 2024 vào lúc 17:34 Daniel Petrisko <petr...@cs.washington.edu> đã viết:

Hi Lap,

1) to build bitstream, you should be the “vivado” directory of whichever example you are building. The outputs will be there in the standard vivado folders (.runs, etc)

2) you should not have to modify RTL. The tcl script in the vivado directory is board and vivado version specific, so you will have to look at the existing script and modify it for your board. It should not be a large change, but vivado tends to change properties, parameters and defaults between versions

Best,

-Dan

On Apr 12, 2024, at 11:01 PM, Lap Dang <lap...@gmail.com> wrote:

Hi team,

I just clone git: https://github.com/black-parrot-hdk/zynq-parrot and run make_file to build bitstream. I am newbie and I have some questions:

1. Where the location will save the output file after build done?

2. Can you share a guideline to config on VC707 board, I tried change 'bp_axi_top' but failed. Pls give a help. Thank you.

---

Best,

Lap

--
You received this message because you are subscribed to the Google Groups "black-parrot" group.
To unsubscribe from this group and stop receiving emails from it, send an email to black-parrot...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/black-parrot/f23fc275-7bfb-488c-b783-52f64d7f002an%40googlegroups.com.

[Daniel Petrisko]

Creating an IPI block for and connecting to the HLS output is generally easiest. You can find examples of how to do this painlessly here (“master” has a method that works, but this PR has a much more robust flow”) https://github.com/black-parrot-hdk/zynq-parrot/pull/92

Best,

-Dan

On May 23, 2024, at 8:22 AM, Lap Dang <lap...@gmail.com> wrote:

Hi Dan,

I wanna  connect an IP (IP RTL  build from code C by Vitis HLS) with BlackPrrot core.

How should I do?

1. Open code BlackParrot core by Vivado Gui and connect with IP

Or

2. Integrate code C of this IP into BlackParrot source code

Pls advice, thanks.

Được gửi từ iPhone của tôi

Vào ngày 23 thg 5, 2024, lúc 21:17, Daniel Petrisko <petr...@cs.washington.edu> đã viết:

To view this discussion on the web visit https://groups.google.com/d/msgid/black-parrot/02C51510-27EB-4986-A63E-E83987CBA5D1%40cs.washington.edu.