0P66I SUBSYS INF messages

Ben Gentenaar

unread,

Apr 10, 2009, 5:33:25 AM4/10/09

to

Running VSE 4.1 with EMC² Dasd. Very often the VSE console flooding with 0P66I SUBSYS INF messages. Is there a way of suppression these SIM messages ? I have FAQS running but the 0P66I message outputs 4 lines to the console.

Thanks in advance,

ben gentenaar

Disclaimer

Dieltiens Geert

unread,

Apr 10, 2009, 5:49:04 AM4/10/09

to

Ben,

A couple of years ago we had that problem too. IIRC, EMC altered a setting in the box (don't know which one, but I think they can set the level of severity) and that reduced the number of messages considerably. Now we only get these messages when there is a real problem with the devices in the EMC-box.

Bye,

Geert.

_____________________________
Geert Dieltiens
Systeembeheerder
Informatica J. Van Breda & C°
Tel.: + 32 3 217 50 16

From: owner...@Lehigh.EDU [mailto:owner...@Lehigh.EDU] On Behalf Of Ben Gentenaar
Sent: vrijdag 10 april 2009 11:33
To: VSE Discussion List
Subject: 0P66I SUBSYS INF messages

DISCLAIMER

This email and any files transmitted with it are confidential
and intended solely for the use of the individual or entity
to whom they are addressed. If you have received this email
in error please notify postm...@vanbreda.be
This footnote also confirms that this email has been checked
for the presence of viruses.

Informatica J.Van Breda & Co NV BTW BE 0427 908 174

Edward M Martin

unread,

Apr 10, 2009, 9:45:27 AM4/10/09

to

Hello,

We had EMC but moved to IBM DS6800. The EMC Symetrix we had could be set to the level of message you want but EMC had to set the level not the user.

And EMC had an issue with sending erroneous heat messages, and they (EMC) turned that off totally.

Ed Martin

Aultman Health Foundation

330-363-5050

ext 35050

From: owner-vs...@Lehigh.EDU [mailto:owner-vs...@Lehigh.EDU] On Behalf Of Dieltiens Geert
Sent: Friday, April 10, 2009 5:48 AM
To: VSE Discussion List
Subject: RE: 0P66I SUBSYS INF messages

Ben,

A couple of years ago we had that problem too. IIRC, EMC altered a setting in the box (don't know which one, but I think they can set the level of severity) and that reduced the number of messages considerably. Now we only get these messages when there is a real problem with the devices in the EMC-box.

Bye,

Geert.

_____________________________
Geert Dieltiens
Systeembeheerder
Informatica J. Van Breda & C°
Tel.: + 32 3 217 50 16

Rich Smrcina

unread,

Apr 10, 2009, 9:50:29 AM4/10/09

to

Ben,

There is service available that will suppress these messages. Check on Shop zSeries or IBMLink for the PTF numbers.

--
Rich Smrcina
Phone: 414-491-6001
http://www.linkedin.com/in/richsmrcina

Catch the WAVV! http://www.wavv.org
WAVV 2009 - Orlando, FL - May 15-19, 2009

Ben Gentenaar

unread,

Apr 10, 2009, 9:50:59 AM4/10/09

to

OK, i will contact the EMC hardware people.

thank you guys,

ben gentenaar

Disclaimer