Firmware Sunplus Box T V1 20
Ainoha Sistek
There is another cable version apparently which also has the USB VID/PID 1a86:e008 ("QinHeng Electronics HID-based serial adapater"), but with slightly different lsusb output. Both cables work fine with the same code, it's unclear what the differences are (or whether they relate to the chip/hardware or to some kind of firmware or ROM).
This process is no different from that of qsat, cobox, nusky or speed hd decoders. You need to download the original firmware of the dead decoder, extract it, rename it and copy to flash. See the easy steps below:
It allows you to flash or install the Stock Firmware (ROM) on the devices powered by Sunplus Chipset. All you need to have is the correct firmware (ROM) of your device > Install the USB Driver > Launch the Tool > Click on the Advanced tab and Load the Firmware > Go to the Basics Tab > Click on the ISP Button to begin the flashing process.
It comes in support of the devices running on the Sunplus chipset. Once you have installed the correct USB Driver of your mobile device, FRM Pro can easily detect the connected device on the computer and get ready to flash the firmware on the mobile.
It allows you to flash or install the BIN format firmware (ROM) on the devices running on the Sunplus Chipset. You can find the .bin file in the Stock firmware of your mobile device released by the device manufacturer.
FRM Pro is a software for Windows created by Sunplus mMedia Inc., intended for compatible devices with SPMP8000 chip by Sunplus. Using this software, user can upload new firmware or updated firmware into their devices. This could be used to fix numurous problems, for example memory corrupted problem that disable writing.
After selecting all option and choosing the proper firmware, click on ISP button. FRM Pro will start uploading your fimware image into your devices. FRM Pro 3.3 can support up to eight devices to flash at one time.