--
You received this message because you are subscribed to the Google Groups "BigBlueButton-Setup" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-setup+unsub...@googlegroups.com.
To post to this group, send email to bigbluebutton-setup@googlegroups.com.
Visit this group at https://groups.google.com/group/bigbluebutton-setup.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to bigbluebu...@googlegroups.com.
Visit this group at https://groups.google.com/group/bigbluebutton-setup.
For more options, visit https://groups.google.com/d/optout.
sudo bbb-conf --check
BigBlueButton Server 1.0.0 (1058)
Kernel version: 3.19.0-68-generic
Distribution: Ubuntu 14.04.5 LTS (64-bit)
Memory: 257847 MB
/var/www/bigbluebutton/client/conf/config.xml (bbb-client)
Port test (tunnel): visio.mlfmonde.org
Red5: visio.mlfmonde.org
useWebrtcIfAvailable: true
/opt/freeswitch/conf/sip_profiles/external.xml (FreeSWITCH)
websocket port: 5066
WebRTC enabled: true
/etc/nginx/sites-available/bigbluebutton (nginx)
server name: visio.mlfmonde.org
port: 80
port: 443 ssl
bbb-client dir: /var/www/bigbluebutton
/var/lib/tomcat7/webapps/bigbluebutton/WEB-INF/classes/bigbluebutton.properties (bbb-web)
bbb-web host: visio.mlfmonde.org
/var/lib/tomcat7/webapps/demo/bbb_api_conf.jsp (API demos)
url: visio.mlfmonde.org
/var/www/bigbluebutton/check/conf/config.xml (client check)
client check: visio.mlfmonde.org
/usr/share/red5/webapps/bigbluebutton/WEB-INF/red5-web.xml (red5)
voice conference: FreeSWITCH
capture video: true
capture desktop: true
/usr/local/bigbluebutton/core/scripts/bigbluebutton.yml (record and playback)
playback host: visio.mlfmonde.org
** Potential problems described below **
# Warning: API URL IPs do not match host:
#
# IP from ifconfig: 192.168.1.239
# /var/lib/tomcat7/webapps/demo/bbb_api_conf.jsp: visio.mlfmonde.org
# Warning: The setting of 37.71.36.210 for proxy_pass in
#
# /etc/bigbluebutton/nginx/sip.nginx
#
# does not match the local IP address (192.168.1.239).
# (This is OK if you've manually changed the values)
# Warning: The setting of for local_ip_v4 in
#
# /opt/freeswitch/conf/vars.xml
#
# does not match the local IP address (192.168.1.239).
# (This is OK if you've manually changed the values)
# Warning: The API demos are installed and accessible from:
#
#
# These API demos allow anyone to access your server without authentication
# to create/manage meetings and recordings. They are for testing purposes only.
# If you are running a production system, remove them by running:
#
# sudo apt-get purge bbb-demo
# Warning: The client self check is installed and accessible from:
#
# https://visio.mlfmonde.org/checkcat /opt/freeswitch/conf/vars.xml
#
<include>
<!-- Preprocessor Variables
These are introduced when configuration strings must be consistent across modules.
NOTICE: YOU CAN NOT COMMENT OUT AN X-PRE-PROCESS line, Remove the line instead.
WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
YOU SHOULD CHANGE THIS default_password value if you don't want to be subject to any
toll fraud in the future. It's your responsibility to secure your own system.
This default config is used to demonstrate the feature set of FreeSWITCH.
WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
-->
<X-PRE-PROCESS cmd="set" data="suppress_cng=true"/>
<X-PRE-PROCESS cmd="set" data="default_password=1234"/>
<!-- Did you change it yet? -->
<X-PRE-PROCESS cmd="set" data="sound_prefix=$${sounds_dir}/en/us/callie"/>
<!--
This setting is what sets the default domain FreeSWITCH will use if all else fails.
FreeSWICH will default to $${local_ip_v4} unless changed. Changing this setting does
affect the sip authentication. Please review conf/directory/default.xml for more
information on this topic.
-->
<X-PRE-PROCESS cmd="set" data="domain=$${local_ip_v4}"/>
<X-PRE-PROCESS cmd="set" data="domain_name=$${domain}"/>
<X-PRE-PROCESS cmd="set" data="hold_music=local_stream://moh"/>
<X-PRE-PROCESS cmd="set" data="use_profile=internal"/>
<!--
Enable ZRTP globally you can override this on a per channel basis
http://wiki.freeswitch.org/wiki/ZRTP (on how to enable zrtp)
-->
<X-PRE-PROCESS cmd="set" data="zrtp_secure_media=true"/>
<!--
Examples of codec options: (module must be compiled and loaded)
codecname[@8000h|16000h|32000h[@XXi]]
XX is the frame size must be multples allowed for the codec
FreeSWITCH can support 10-120ms on some codecs.
We do not support exceeding the MTU of the RTP packet.
iLBC@30i - iLBC using mode=30 which will win in all cases.
DVI4@8000h@20i - IMA ADPCM 8kHz using 20ms ptime. (multiples of 10)
DVI4@16000h@40i - IMA ADPCM 16kHz using 40ms ptime. (multiples of 10)
speex@8000h@20i - Speex 8kHz using 20ms ptime.
speex@16000h@20i - Speex 16kHz using 20ms ptime.
speex@32000h@20i - Speex 32kHz using 20ms ptime.
BV16 - BroadVoice 16kb/s narrowband, 8kHz
BV32 - BroadVoice 32kb/s wideband, 16kHz
G7221@16000h - G722.1 16kHz (aka Siren 7)
G7221@32000h - G722.1C 32kHz (aka Siren 14)
CELT@32000h - CELT 32kHz, only 10ms supported
CELT@48000h - CELT 48kHz, only 10ms supported
GSM@40i - GSM 8kHz using 40ms ptime. (GSM is done in multiples of 20, Default is 20ms)
G722 - G722 16kHz using default 20ms ptime. (multiples of 10)
PCMU - G711 8kHz ulaw using default 20ms ptime. (multiples of 10)
PCMA - G711 8kHz alaw using default 20ms ptime. (multiples of 10)
G726-16 - G726 16kbit adpcm using default 20ms ptime. (multiples of 10)
G726-24 - G726 24kbit adpcm using default 20ms ptime. (multiples of 10)
G726-32 - G726 32kbit adpcm using default 20ms ptime. (multiples of 10)
G726-40 - G726 40kbit adpcm using default 20ms ptime. (multiples of 10)
AAL2-G726-16 - Same as G726-16 but using AAL2 packing. (multiples of 10)
AAL2-G726-24 - Same as G726-24 but using AAL2 packing. (multiples of 10)
AAL2-G726-32 - Same as G726-32 but using AAL2 packing. (multiples of 10)
AAL2-G726-40 - Same as G726-40 but using AAL2 packing. (multiples of 10)
LPC - LPC10 using 90ms ptime (only supports 90ms at this time in FreeSWITCH)
L16 - L16 isn't recommended for VoIP but you can do it. L16 can exceed the MTU rather quickly.
These are the passthru audio codecs:
G729 - G729 in passthru mode. (mod_g729)
G723 - G723.1 in passthru mode. (mod_g723_1)
AMR - AMR in passthru mode. (mod_amr)
These are the passthru video codecs: (mod_h26x)
H261 - H.261 Video
H263 - H.263 Video
H263-1998 - H.263-1998 Video
H263-2000 - H.263-2000 Video
H264 - H.264 Video
RTP Dynamic Payload Numbers currently used in FreeSWITCH and what for.
96 - AMR
97 - iLBC (30)
98 - iLBC (20)
99 - Speex 8kHz, 16kHz, 32kHz
100 -
101 - telephone-event
102 -
103 -
104 -
105 -
106 - BV16
107 - G722.1 (16kHz)
108 -
109 -
110 -
111 -
112 -
113 -
114 - CELT 32kHz, 48kHz
115 - G722.1C (32kHz)
116 -
117 - SILK 8kHz
118 - SILK 12kHz
119 - SILK 16kHz
120 - SILK 24kHz
121 - AAL2-G726-40 && G726-40
122 - AAL2-G726-32 && G726-32
123 - AAL2-G726-24 && G726-24
124 - AAL2-G726-16 && G726-16
125 -
126 -
127 - BV32
<X-PRE-PROCESS cmd="set" data="global_codec_prefs=G722,PCMU,PCMA,GSM"/>
<X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMU,PCMA,GSM"/>
-->
<X-PRE-PROCESS cmd="set" data="global_codec_prefs=OPUS,speex@16000h@20i,speex@8000h@20i,G7221@32000h,G7221@16000h,G722,PCMU,PCMA,GSM" />
<X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=speex@16000h@20i,PCMU,PCMA,GSM" />
<!--
xmpp_client_profile and xmpp_server_profile
xmpp_client_profile can be any string.
xmpp_server_profile is appended to "dingaling_" to form the database name
containing the "subscriptions" table.
used by: dingaling.conf.xml enum.conf.xml
-->
<X-PRE-PROCESS cmd="set" data="xmpp_client_profile=xmppc"/>
<X-PRE-PROCESS cmd="set" data="xmpp_server_profile=xmpps"/>
<!--
THIS IS ONLY USED FOR DINGALING
bind_server_ip
Can be an ip address, a dns name, or "auto".
This determines an ip address available on this host to bind.
If you are separating RTP and SIP traffic, you will want to have
use different addresses where this variable appears.
Used by: dingaling.conf.xml
-->
<X-PRE-PROCESS cmd="set" data="bind_server_ip=37.71.36.210"/>
<!-- NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE
If you're going to load test FreeSWITCH please input real IP addresses
for external_rtp_ip and external_sip_ip
-->
<!-- external_rtp_ip
Can be an one of:
ip address: "12.34.56.78"
a stun server lookup: "stun:stun.server.com"
a DNS name: "host:host.server.com"
where fs.mydomain.com is a DNS A record-useful when fs is on
a dynamic IP address, and uses a dynamic DNS updater.
If unspecified, the bind_server_ip value is used.
Used by: sofia.conf.xml dingaling.conf.xml
-->
<X-PRE-PROCESS cmd="set" data="external_rtp_ip=37.71.36.210"/>
<!-- external_sip_ip
Used as the public IP address for SDP.
Can be an one of:
ip address: "12.34.56.78"
a stun server lookup: "stun:stun.server.com"
a DNS name: "host:host.server.com"
where fs.mydomain.com is a DNS A record-useful when fs is on
a dynamic IP address, and uses a dynamic DNS updater.
If unspecified, the bind_server_ip value is used.
Used by: sofia.conf.xml dingaling.conf.xml
-->
<X-PRE-PROCESS cmd="set" data="external_sip_ip=37.71.36.210"/>
<!-- unroll-loops
Used to turn on sip loopback unrolling.
-->
<X-PRE-PROCESS cmd="set" data="unroll_loops=true"/>
<!-- outbound_caller_id and outbound_caller_name
The caller ID telephone number we should use when calling out.
Used by: conference.conf.xml and user directory for default
outbound callerid name and number.
-->
<X-PRE-PROCESS cmd="set" data="outbound_caller_name=FreeSWITCH"/>
<X-PRE-PROCESS cmd="set" data="outbound_caller_id=0000000000"/>
<!-- various debug and defaults -->
<X-PRE-PROCESS cmd="set" data="call_debug=false"/>
<X-PRE-PROCESS cmd="set" data="console_loglevel=info"/>
<X-PRE-PROCESS cmd="set" data="default_areacode=918"/>
<X-PRE-PROCESS cmd="set" data="default_country=US"/>
<!-- if false or undefined, the destination number is included in presence NOTIFY dm:note.
if true, the destination number is not included -->
<X-PRE-PROCESS cmd="set" data="presence_privacy=false"/>
<X-PRE-PROCESS cmd="set" data="be-ring=%(1000,3000,425)"/>
<X-PRE-PROCESS cmd="set" data="ca-ring=%(2000,4000,440,480)"/>
<X-PRE-PROCESS cmd="set" data="cn-ring=%(1000,4000,450)"/>
<X-PRE-PROCESS cmd="set" data="cy-ring=%(1500,3000,425)"/>
<X-PRE-PROCESS cmd="set" data="cz-ring=%(1000,4000,425)"/>
<X-PRE-PROCESS cmd="set" data="de-ring=%(1000,4000,425)"/>
<X-PRE-PROCESS cmd="set" data="dk-ring=%(1000,4000,425)"/>
<X-PRE-PROCESS cmd="set" data="dz-ring=%(1500,3500,425)"/>
<X-PRE-PROCESS cmd="set" data="eg-ring=%(2000,1000,475,375)"/>
<X-PRE-PROCESS cmd="set" data="es-ring=%(1500,3000,425)"/>
<X-PRE-PROCESS cmd="set" data="fi-ring=%(1000,4000,425)"/>
<X-PRE-PROCESS cmd="set" data="fr-ring=%(1500,3500,440)"/>
<X-PRE-PROCESS cmd="set" data="hk-ring=%(400,200,440,480);%(400,3000,440,480)"/>
<X-PRE-PROCESS cmd="set" data="hu-ring=%(1250,3750,425)"/>
<X-PRE-PROCESS cmd="set" data="il-ring=%(1000,3000,400)"/>
<X-PRE-PROCESS cmd="set" data="in-ring=%(400,200,425,375);%(400,2000,425,375)"/>
<X-PRE-PROCESS cmd="set" data="jp-ring=%(1000,2000,420,380)"/>
<X-PRE-PROCESS cmd="set" data="ko-ring=%(1000,2000,440,480)"/>
<X-PRE-PROCESS cmd="set" data="pk-ring=%(1000,2000,400)"/>
<X-PRE-PROCESS cmd="set" data="pl-ring=%(1000,4000,425)"/>
<X-PRE-PROCESS cmd="set" data="ro-ring=%(1850,4150,475,425)"/>
<X-PRE-PROCESS cmd="set" data="rs-ring=%(1000,4000,425)"/>
<X-PRE-PROCESS cmd="set" data="ru-ring=%(800,3200,425)"/>
<X-PRE-PROCESS cmd="set" data="sa-ring=%(1200,4600,425)"/>
<X-PRE-PROCESS cmd="set" data="tr-ring=%(2000,4000,450)"/>
<X-PRE-PROCESS cmd="set" data="uk-ring=%(400,200,400,450);%(400,2000,400,450)"/>
<X-PRE-PROCESS cmd="set" data="us-ring=%(2000,4000,440,480)"/>
<X-PRE-PROCESS cmd="set" data="bong-ring=v=-7;%(100,0,941.0,1477.0);v=-7;>=2;+=.1;%(1400,0,350,440)"/>
<X-PRE-PROCESS cmd="set" data="beep=%(1000,0,640)"/>
<X-PRE-PROCESS cmd="set" data="sit=%(274,0,913.8);%(274,0,1370.6);%(380,0,1776.7)"/>
<!--
Setting up your default sip provider is easy.
Below are some values that should work in most cases.
These are for conf/directory/default/example.com.xml
-->
<X-PRE-PROCESS cmd="set" data="default_provider=example.com"/>
<X-PRE-PROCESS cmd="set" data="default_provider_username=joeuser"/>
<X-PRE-PROCESS cmd="set" data="default_provider_password=password"/>
<X-PRE-PROCESS cmd="set" data="default_provider_from_domain=example.com"/>
<!-- true or false -->
<X-PRE-PROCESS cmd="set" data="default_provider_register=false"/>
<X-PRE-PROCESS cmd="set" data="default_provider_contact=5000"/>
<!--
SIP and TLS settings. http://wiki.freeswitch.org/wiki/Tls
-->
<X-PRE-PROCESS cmd="set" data="sip_tls_version=tlsv1"/>
<!-- Internal SIP Profile -->
<X-PRE-PROCESS cmd="set" data="internal_auth_calls=true"/>
<X-PRE-PROCESS cmd="set" data="internal_sip_port=5090"/>
<X-PRE-PROCESS cmd="set" data="internal_tls_port=5061"/>
<X-PRE-PROCESS cmd="set" data="internal_ssl_enable=false"/>
<!-- External SIP Profile -->
<X-PRE-PROCESS cmd="set" data="external_auth_calls=false"/>
<X-PRE-PROCESS cmd="set" data="external_sip_port=5060"/>
<X-PRE-PROCESS cmd="set" data="external_tls_port=5081"/>
<X-PRE-PROCESS cmd="set" data="external_ssl_enable=false"/>
</include>
<profile name="external">
<!-- http://wiki.freeswitch.org/wiki/Sofia_Configuration_Files -->
<!-- This profile is only for outbound registrations to providers -->
<gateways>
<X-PRE-PROCESS cmd="include" data="external/*.xml"/>
</gateways>
<aliases>
<!--
<alias name="outbound"/>
<alias name="nat"/>
-->
</aliases>
<domains>
<domain name="all" alias="false" parse="true"/>
</domains>
<settings>
<param name="debug" value="0"/>
<!-- If you want FreeSWITCH to shutdown if this profile fails to load, uncomment the next line. -->
<!-- <param name="shutdown-on-fail" value="true"/> -->
<param name="sip-trace" value="no"/>
<param name="sip-capture" value="no"/>
<param name="rfc2833-pt" value="101"/>
<!-- RFC 5626 : Send reg-id and sip.instance -->
<!--<param name="enable-rfc-5626" value="true"/> -->
<param name="sip-port" value="$${external_sip_port}"/>
<param name="dialplan" value="XML"/>
<param name="context" value="public"/>
<param name="dtmf-duration" value="2000"/>
<param name="inbound-codec-prefs" value="$${global_codec_prefs}"/>
<param name="outbound-codec-prefs" value="$${outbound_codec_prefs}"/>
<param name="hold-music" value="$${hold_music}"/>
<param name="rtp-timer-name" value="soft"/>
<!--<param name="enable-100rel" value="true"/>-->
<!--<param name="disable-srv503" value="true"/>-->
<!-- This could be set to "passive" -->
<param name="local-network-acl" value="localnet.auto"/>
<param name="manage-presence" value="false"/>
<!-- used to share presence info across sofia profiles
manage-presence needs to be set to passive on this profile
if you want it to behave as if it were the internal profile
for presence.
-->
<!-- Name of the db to use for this profile -->
<!--<param name="dbname" value="share_presence"/>-->
<!--<param name="presence-hosts" value="$${domain}"/>-->
<!--<param name="force-register-domain" value="$${domain}"/>-->
<!--all inbound reg will stored in the db using this domain -->
<!--<param name="force-register-db-domain" value="$${domain}"/>-->
<!-- ************************************************* -->
<!--<param name="aggressive-nat-detection" value="true"/>-->
<param name="inbound-codec-negotiation" value="generous"/>
<param name="nonce-ttl" value="60"/>
<param name="auth-calls" value="false"/>
<param name="inbound-late-negotiation" value="true"/>
<param name="inbound-zrtp-passthru" value="true"/> <!-- (also enables late negotiation) -->
<!--
DO NOT USE HOSTNAMES, ONLY IP ADDRESSES IN THESE SETTINGS!
<param name="rtp-ip" value="$${local_ip_v4}"/>
<param name="sip-ip" value="$${local_ip_v4}"/>
<param name="ext-rtp-ip" value="auto-nat"/>
<param name="ext-sip-ip" value="auto-nat"/>
-->
<param name="rtp-ip" value="$${local_ip_v4}"/>
<param name="sip-ip" value="$${local_ip_v4}"/>
<param name="ext-rtp-ip" value="37.71.36.210"/>
<param name="ext-sip-ip" value="37.71.36.210"/>
<param name="rtp-timeout-sec" value="300"/>
<param name="rtp-hold-timeout-sec" value="1800"/>
<!--<param name="enable-3pcc" value="true"/>-->
<!-- TLS: disabled by default, set to "true" to enable -->
<param name="tls" value="$${external_ssl_enable}"/>
<!-- Set to true to not bind on the normal sip-port but only on the TLS port -->
<param name="tls-only" value="false"/>
<!-- additional bind parameters for TLS -->
<param name="tls-bind-params" value="transport=tls"/>
<!-- Port to listen on for TLS requests. (5081 will be used if unspecified) -->
<param name="tls-sip-port" value="$${external_tls_port}"/>
<!-- Location of the agent.pem and cafile.pem ssl certificates (needed for TLS server) -->
<!--<param name="tls-cert-dir" value=""/>-->
<!-- Optionally set the passphrase password used by openSSL to encrypt/decrypt TLS private key files -->
<param name="tls-passphrase" value=""/>
<!-- Verify the date on TLS certificates -->
<param name="tls-verify-date" value="true"/>
<!-- TLS verify policy, when registering/inviting gateways with other servers (outbound) or handling inbound registration/invite requests how should we verify their certificate -->
<!-- set to 'in' to only verify incoming connections, 'out' to only verify outgoing connections, 'all' to verify all connections, also 'in_subjects', 'out_subjects' and 'all_subjects' for subject validation. Multiple policies can be split with a '|' pipe -->
<param name="tls-verify-policy" value="none"/>
<!-- Certificate max verify depth to use for validating peer TLS certificates when the verify policy is not none -->
<param name="tls-verify-depth" value="2"/>
<!-- If the tls-verify-policy is set to subjects_all or subjects_in this sets which subjects are allowed, multiple subjects can be split with a '|' pipe -->
<param name="tls-verify-in-subjects" value=""/>
<!-- TLS version ("sslv23" (default), "tlsv1"). NOTE: Phones may not work with TLSv1 -->
<param name="tls-version" value="$${sip_tls_version}"/>
<param name="ws-binding" value=":5066"/>
<param name="wss-binding" value=":7443"/>
<!-- enable rtcp on every channel also can be done per leg basis with rtcp_audio_interval_msec variable set to passthru to pass it across a call-->
<param name="rtcp-audio-interval-msec" value="5000"/>
<param name="rtcp-video-interval-msec" value="5000"/>
<!-- Cut down in the join time -->
<param name="dtmf-type" value="info"/>
<param name="liberal-dtmf" value="true"/>
</settings>
</profile>
# The ip and port the BBB SIP app is going to use
bbb.sip.app.ip=192.168.1.239
bbb.sip.app.port=5070
# The username and password the BBB SIP app to use to
# register with FreeSWITCH
sip.server.username=bbbuser
sip.server.password=secret
# The ip and port of the FreeSWITCH server
freeswitch.ip=192.168.1.239
freeswitch.port=5060
# The start/stop RTP port the application is going to use
# for the media stream.
startAudioPort=15000
stopAudioPort=16383
redis.host=127.0.0.1
redis.port=6379
redis.pass=
# If you want mjsip stack (red5/log/*access*.log) to minimize the amount of logs it
# generates, set this to a lower value (e.g. 3).
sipStackDebugLevel=3
location /ws {
proxy_pass https://37.71.36.210:7443;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "Upgrade";
proxy_read_timeout 6h;
proxy_send_timeout 6h;
client_body_timeout 6h;
send_timeout 6h;
}
To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-setup+unsubscribe...@googlegroups.com.
To post to this group, send email to bigbluebu...@googlegroups.com.
Visit this group at https://groups.google.com/group/bigbluebutton-setup.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "BigBlueButton-Setup" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-setup+unsub...@googlegroups.com.
To post to this group, send email to bigbluebutton-setup@googlegroups.com.
Visit this group at https://groups.google.com/group/bigbluebutton-setup.
For more options, visit https://groups.google.com/d/optout.
To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-setup+unsub...@googlegroups.com.
To post to this group, send email to bigbluebu...@googlegroups.com.
Visit this group at https://groups.google.com/group/bigbluebutton-setup.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "BigBlueButton-Setup" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-setup+unsub...@googlegroups.com.
To post to this group, send email to bigbluebu...@googlegroups.com.
Visit this group at https://groups.google.com/group/bigbluebutton-setup.
For more options, visit https://groups.google.com/d/optout.
<X-PRE-PROCESS cmd="set" data="bind_server_ip=37.71.36.210"/>
/opt/freeswitch/bin/fs_cli -x "sofia status profile external"
telnet 37.71.36.210 7443
Trying 37.71.36.210 ...
Connected to 37.71.36.210.
Escape character is '^]'.
modprobe dummy
/sbin/ip link set name eth10 dev dummy0
ifconfig eth10 31.71.36.210 netmask 255.255.255.255
To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-setup+unsub...@googlegroups.com.
To post to this group, send email to bigbluebu...@googlegroups.com.
Visit this group at https://groups.google.com/group/bigbluebutton-setup.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "BigBlueButton-Setup" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-setup+unsub...@googlegroups.com.
To post to this group, send email to bigbluebu...@googlegroups.com.
Visit this group at https://groups.google.com/group/bigbluebutton-setup.
For more options, visit https://groups.google.com/d/optout.
no ?
Regards
Pasquale
To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-setup+unsubscribe...@googlegroups.com.
To post to this group, send email to bigbluebu...@googlegroups.com.
Visit this group at https://groups.google.com/group/bigbluebutton-setup.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "BigBlueButton-Setup" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-setup+unsubscribe...@googlegroups.com.
To post to this group, send email to bigbluebu...@googlegroups.com.
Visit this group at https://groups.google.com/group/bigbluebutton-setup.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "BigBlueButton-Setup" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-setup+unsub...@googlegroups.com.
To post to this group, send email to bigbluebutton-setup@googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "BigBlueButton-Setup" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-setup+unsub...@googlegroups.com.
To post to this group, send email to bigbluebutton-setup@googlegroups.com.
Visit this group at https://groups.google.com/group/bigbluebutton-setup.
For more options, visit https://groups.google.com/d/optout.
It was not enough in my case to reproduce everything described in documentation and this branch of forum. I have installed fresh Ubuntu 16.04 on HP blade server behind NAT without Hairpin and followed documentation letter by letter. Without dummy NIC and external IP proxy settings I had WebRTC 1002 error. After dummy NIC creating I faced most difficult problem - error 1007. Candidate from side of server wasn't able to forward UDP packets to remote candidate. Both candidates were behind NAT. Some further researches of network pushed me to rightsolution. I have forwarded UDP packets from local IP to external IP (which was loopback interface infact as dummy NIC with external IP was created) using iptables NAT postrouting and 2 additional kernel modules. Thus, if nothing helps to solve error 1007 problem for both server and client behind NAT, we have to try force forwanding of UDP traffic from local to external IP. Just do the following as root:1. Load ip_conntrack_sip kernel module:
# modprobe ip_conntrack_sip2.Load ip_nat_sip kernel module:
# modprobe ip_nat_sip
3. Add NAT postrouting rule:
# iptables -t nat -A POSTROUTING -p udp --match multiport --sports 16384:32768 -s 192.168.0.30 -j SNAT --to-source 77.220.141.35
where you have to replace 192.168.0.30 with your internal (local) IP address and 77.220.141.35 with your external IP. The last command can be rewrited in such the way:
# iptables -t nat -A POSTROUTING -p udp --match multiport --sports 16384:32768 -s LOCAL_IP_ADDRESS -j SNAT --to-source EXTERNAL_IP_ADDRESS
4. Restart BigBlueButton afterwards:
# bbb-conf --restart
and check if the error 1007 dissappeared. If the problem is solved, make kernel modules and iptables rule loading persistent at system start.
понеділок, 6 березня 2017 р. 14:50:14 UTC+2 користувач Fred Dixon написав:
To post to this group, send email to bigbluebu...@googlegroups.com.To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-setup+unsubscribe...@googlegroups.com.
Visit this group at https://groups.google.com/group/bigbluebutton-setup.
For more options, visit https://groups.google.com/d/optout.
--BigBlueButton Developer@bigbluebutton
--
You received this message because you are subscribed to the Google Groups "BigBlueButton-Setup" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-setup+unsub...@googlegroups.com.
To post to this group, send email to bigbluebutton-setup@googlegroups.com.
Visit this group at https://groups.google.com/group/bigbluebutton-setup.
For more options, visit https://groups.google.com/d/optout.