Error 1006

Sakis

unread,

May 13, 2021, 12:57:42 PM5/13/21

to BigBlueButton-dev

I use bbb 2.2.36 and today I cannot activate the mic. I get an 1006 error.

Yesterday everything was ok. I have nοt changed anything on my server.

When I run bbb-conf --check, I get this:

# Potential problems described below

# Warning: You have this server defined for https, but in

#

# /etc/bigbluebutton/nginx/sip.nginx

#

# did not find the use of https in definition for proxy_pass

#

# proxy_pass http://MYSERVER_IP:5066;

#

# Warning: You have this server defined for https, but in

#

# /etc/bigbluebutton/nginx/sip.nginx

#

# did not find the use of port 7443 in definition for proxy_pass

#

# proxy_pass http://MYSERVER_IP:5066;

and this is my /etc/bigbluebutton/nginx/sip.nginx

location /ws {

proxy_pass http:// MYSERVER_IP :5066;

proxy_http_version 1.1;

proxy_set_header Upgrade $http_upgrade;

proxy_set_header Connection "Upgrade";

proxy_read_timeout 6h;

proxy_send_timeout 6h;

client_body_timeout 6h;

send_timeout 6h;

auth_request /bigbluebutton/connection/checkAuthorization;

auth_request_set $auth_status $upstream_status;

}

Eliezer Salas

unread,

May 13, 2021, 1:16:49 PM5/13/21

to BigBlueButton-dev

Same here but am getting a 1002 error today, no changes have been made to the server and freeswitch is running without errors, everything works but the mic

Sakis

unread,

May 13, 2021, 1:25:24 PM5/13/21

to BigBlueButton-dev

Well, I have just found a solution

/etc/bigbluebutton/nginx/sip.nginx

change this :

proxy_pass http:// MYSERVER_IP :5066;

with:

proxy_pass https://MYSERVER_IP:7443;

It worked for me

Eliezer Salas

unread,

May 13, 2021, 1:31:36 PM5/13/21

to BigBlueButton-dev

I had it configured on 7443 since day one, just ran --check and found this :

# Error: Unable to connect to port 1935 (RTMP) on bbb.punkusaber.com
# Error: Could not detect FreeSWITCH listening on port 5060

Ali Alhaidary

unread,

May 13, 2021, 3:40:08 PM5/13/21

to bigblueb...@googlegroups.com

Is it better to change it? we have been using it on the default of 5066

Ali

--
You received this message because you are subscribed to the Google Groups "BigBlueButton-dev" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bigbluebutton-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/bigbluebutton-dev/1e3359f8-71e8-46a0-a2c9-84ac1b3701e2n%40googlegroups.com.

Fred Dixon

unread,

May 13, 2021, 10:30:58 PM5/13/21

to BigBlueButton-dev

See

https://docs.bigbluebutton.org/2.2/install.html#configure-freeswitch-for-using-ssl

and the reference to 1006 error.

Regards,... Fred

To view this discussion on the web visit https://groups.google.com/d/msgid/bigbluebutton-dev/35431866-de51-3de3-4563-d3d423583cb1%40the5stars.org.

--

BigBlueButton Developer

http://bigbluebutton.org/

Like BigBlueButton? Tweet us at @bigbluebutton

Ali Alhaidary

unread,

May 13, 2021, 10:52:39 PM5/13/21

to bigblueb...@googlegroups.com

Thanks, with each email we learn something new...

Ali

To view this discussion on the web visit https://groups.google.com/d/msgid/bigbluebutton-dev/CAOeuy5NrB5J%3D9Xj%2BnEhMg5odCb5u6mqSWbpFaQ-mV9KQ2bpzcQ%40mail.gmail.com.