Unlock Delphi Radio
Rell Jette
By default, all radio buttons that are directly contained in the same windowed control container, such as a TRadioGroup or TPanel, are grouped. For example, two radio buttons on a form can be checked at the same time only if they are contained in separate containers, such as two different group boxes.
Put two buttons on a panel, and the other two on another panel. That way, they will be treated as separate groupings. Change the panel bevels to remove the edge, and the four buttons won't look to the user as if they are separated, if that's what you'd like.
This is why we use Groupbox and Radiogroups (Can be found at standard controls). I recommend you to create 2 Groupboxes and put 2 radiobuttons in each one. Then you will be able to check 2 radiobuttons.
Too much work for something that could had been implemented on a simple property like RadioGroupIndex, if assigned a value of 0 then work as they work now, else uncheck only the ones for that same group... like on main menus.
If these radios are installed in an older model Freightliner truck, functionality with steering wheel controls and/or dash displays may be limited. For older model Freightliner trucks, the standard Delphi radio models are recommended.
Delphi has updated that speaker system with the new Delphi Premium Sound System, which they recently sent me for review. They also included a SkyFi 3 for me to test it with. After a few weeks with the system, I found it to be very similar to the original, and very simple and easy to use.
The Delphi Premium Sound System is targeted to people who have bought a portable XM radio for their car and want to use it elsewhere. It is essentially a portable set of speakers, designed to for use with several different compact XM receivers.
Out of the box, the system is compatible with Delphi's SkyFi3, Roady XT and MyFi, as well as Audiovox's Xpress. Included are adaptors for docking any of these models. With another adaptor that is sold separately, the Premium Sound System is also compatible with the Pioneer Inno and Samsung's Helix.
The unit itself is very simple. It is constructed of sturdy black plastic with a silver trim on the front around the grey metal grill that runs across the entire face of the unit. There are only 3 buttons on the front: Volume Down, Bass, and Volume Up. Just dock your receiver and turn it on, and the system comes to life. On the rear of the unit there is a headphone jack and a 1/8" auxiliary input jack that allows you to connect an MP3 player or CD player, etc. There is also a battery on/off switch, and an 18v DC input for the included power supply.
There is fold-up handle built into the top of the unit, and a top cover (that is remarkably difficult to remove) that reveals the included antenna and cable. The literature available on Delphi's website claims that the integrated XM antenna "works right out of the box in most locations," but I could only get it to work indoors if I had the unit sitting in or by a window, which is always the case with satellite radio. So I think they mean that it works "right out of the box in most OUTDOOR locations." The home antenna has a 20 foot cable that allows you to place it in a window, with the cable running to your speakers on a nearby table, for example. Outdoors, the unit works well without having to remove the top and unwind the cable. On the bottom of the unit is a battery compartment that houses eight "C" cell batteries for portable use.
The unit maximum power output is rated at 20 watts. The cabinet is not shielded, and Delphi warns against it being placed near CRT computer monitors and TV's. The battery life is rated at 6-8 hours of use from alkaline cells.
From what I could see, the speakers appear to be a pair of 3" drivers that both have tuned ports. During my testing, I spent quite a bit of time on XM's classic rock stations, such as Top Tracks (channel 46). Sound quality was decent for a product of this type. The "BASS" button on the front is Delphi's MaxxBass system which is purported to provide "full sound, even at lower volume levels." Indeed, it boosts the bottom end and warms up the tone considerably. The effect reminded me of the old "loudness" button found on many old receivers in the 90's. When listening at lower levels, I found it to be an improvement. For example, listening to Norah Jones' "Be My Somebody" on Starbuck's XM Cafe (channel 45) sounded much better with the MaxxBass system engaged. Towards the end of the song, I turned off the BASS and the song sounded thin and tinny, especially at higher volumes. ESPN Radio (channel 140) was crisp and clear and sounded great as I worked out in my garage or driveway with the volume turned up listening to sports talk.
Overall, the sound quality of the system was average, at best. While I have heard much worse from portable speaker systems, I have also heard much better. But the purpose of a system like this is convenience and portability, not critical listening. For straight up utility, the Delphi gets the job done with convenience and ease. But with a MSRP of $179.99, I think it is overpriced considering it's limitations.
I had a few gripes with the system that I want to address. Just as with my original, similar system from several years ago, the top cover that hides the home antenna and cable should not be so difficult to remove. You have to use two hands, or thumbs, to press down on the marked areas and then slide the cover off. I could never do this easily or without wanting to cuss. This is a design issue that should be addressed. Secondly, why is the headphone jack located on the rear of the unit? Am I the only one who thinks that if this unit is sitting on your desk, and you decide to listen via your headphones that it would much more intuitive to plug them into the front panel of the unit, rather than pick it up or turn it around to access the jack in the rear? My third and final gripe is a bit unfair, because it is not with the speaker unit itself, but with the SkyFi3 receiver that was sent to me to use for the review. I found it unnecessarily complicated to operate. It took me a while to figure out how to quickly scan or tune into specific channels. After I while I finally got it, but it was pretty clumsy. But again, this review is for the speaker system, not the SkyFi3, and there are plenty of other receivers that are compatible with the Premium Sound System.
As for the good news, this is a must-have product if you have a compatible portable XM receiver in your car. It is incredibly convenient to pop it out of your car and into the dock and listen to XM in your office, on the beach, or while you work in your yard or garage. For any of those circumstances, it delivers quality sound and does the job with ease, and without a complicated array of unnecessary buttons or controls. Dock it, turn it on, and set the volume. That is the kind of simplicity we need, and the Delphi Premium Sound System hits the mark.
Over the years J. has constantly found himself to be an "early-adopter," spending way too much money on "new" technologies such as Compact Disc, LaserDisc, and DVD. He is one of the few people who actually purchased (and still owns) a CORE programmable remote control (bonus points if you remember this product).
Our GPS radios are guaranteed to operate seamlessly with your vehicle. No modifications or expensive dealer programming required. Our fully guaranteed pre-owned navigation radios ship complete with a GPS antenna, navigation map disc, and VSS install harness at no extra cost. Please provide us with your VIN upon check-out to take advantage of our free programming service.
Tiered shipping may not apply to over sized/weight parts. Final shipping cost shown in cart. If shipping is higher for special order or larger parts you may have to pay additional shipping before part is shipped.
Description: This premium Delphi satellite radio bundle is ideal for heavy-duty use, specifically designed with larger buttons and tougher construction for commercial vehicle drivers. An integrated SiriusXM satellite radio tuner offers 100+ channels of crystal clear programming, available nationwide. Built-in Bluetooth with a remote microphone allows for hands-free phone operation and audio streaming, with up to 10 devices easily stored. Plus, the kit includes 7 free weather band channels for 24/7 updates. Outfit your truck with this total audio solution from Peiker and Delphi today!Can't Find The Right Truck Stereo? - We can help! Call us today - (435) 216-7812.
On my form I have 2 radio buttons and 3 check boxes. If I change the font of the parent, the font of the control does change, but the foreground color remains black, both design time and runtime. I do have the ParentFont and ParentColor properties set to true. I have even attempted to change the font color of the individual component at runtime and they still remain black. The behavior I would expect is the component font properties would inherit from the parent.
That does appear to be a workaround, but it screws up the transparency of all the menu icons and removed all the images from the buttons. However, I can still select any of the themes this way, but with the image limitations I just provided.
With runtime themes enable and selecting Windows as the default theme. I am able to change the colors and fonts of the form. The font style for the Radio Buttons and Check Boxes will change, It is just the font color that will not change on these two components. The font color does change for everything else on the form.
c80f0f1006