son dynamo plug position question (drive or non drive side)

[jamin orrall]

I am wondering if a  Son 28 hub can safely run with the electrical tabs on the non-drive side.    The hub was purchased in 2014. 

Thank you and my apologies if this has been covered before.

Jamin

[Peter J Leiss]

Jamin you can get most of your questions answered on the Peter White Cycles web site https://www.peterwhitecycles.com/schmidt.php

SON28 Klassic Hub Alignment
Some older, pre 2012 SON dynamo hubs must be used with the connectors only on the right side of the bike. The original version (before 2001) of the SON28 has polished aluminum flanges with a black painted steel center shell. That version can be used with the connectors on either side of the bike. The later SON28, now called the SON28 Classic, SON20, and any disk version for a normal bicycle fork must have the connectors on the right side. SONXS, SONXS 100, SON20R and SONdelux can be used either way. SON20R Disc and SONdelux Disc must have their connectors on the right side.

Sent from my iPad

On Oct 9, 2022, at 9:21 PM, jamin orrall <hello...@gmail.com> wrote:

I am wondering if a  Son 28 hub can safely run with the electrical tabs on the non-drive side.    The hub was purchased in 2014. 

Thank you and my apologies if this has been covered before.

Jamin

--
You received this message because you are subscribed to the Google Groups "Bicycle Lifestyle" group.
To unsubscribe from this group and stop receiving emails from it, send an email to bicyclelifesty...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/bicyclelifestyle/1c5d18c8-8dce-42ef-a75f-213b48f13eacn%40googlegroups.com.

[jamin orrall]

thank you!