Changing standard to EN410

[Navid Soheilnia]

Hi There,

I am trying to run the calculations based on EN 410, but as soon as I change the standard to this one, I get the message below, How can I fix this?

[Jacob C. Jonsson]

Hi,

> I am trying to run the calculations based on EN 410, but as soon as I
> change the standard to this one, I get the message below, How can I fix
> this?

The standard file you selected does not include information
how to calculate all the values WINDOW can display and
the popup lists which values are not defined in prEN_410.std

The standards files are in text format located in:
c:/Program Files (x86)/LBNL/LBNL Shared/Standards/
on a normal installation.

You can copy the definitions you want from W5_NFRC_2003.std
and paste them into prEN_410.std to get rid of the
error messages. E.g. the TDW definition:
Name : TDW
Description : NFRC 300-2003 UV Damage Weighted Transmittance based on
CIE 89/3
Source Spectrum : ASTM E891 Table 1 Direct AM1_5.ssp
Detector Spectrum : UV Action (a=3.6, b=12.0)
Wavelength Set : Source
Integration Rule : Trapezoidal
Minimum Wavelength : 0.3
Maximum Wavelength : 0.7

There might be small differences between
NFRC and En410 definitions of these.

Best,
Jacob