Zincs for oceanis440

[George Harris]

Hello All,
When I hauled the boat last week there was nothing left to see of the prop zinc, or the collar zinc for the shaft (not certain there was one on the shaft). I had to leave the boat and can’t get back til it’s time to splash so I can’t measure anything. Boat is a 96’ Oceanis 440 and the configuration is similar to the attached photo (not my boat).
If any of you know the size(s) of these two zincs it would be an enormous help. Or a lead to a supplier who keeps records of what zinc fits which boat. Boatzincs.com lists lots of Beneteau specific collar and prop zincs but when I called they said they don’t cross ref by boat model.
Thanks for any help.
George Harris
1996 Oceanis 440 “Sophia”

[Leslie Gevirtz]

Try BoatZincs.com. The customer service guy there will know exactly what you need. 

I’ve used them for 3 years now for my Beneteau 323 and they’re fast. And they ship. And what they send fits perfectly. I do use a collar zinc and another zinc on the nose of the prop. 

And they have metric sizes. 

Good luck. 

--
Largest Beneteau group, over **1121
** members and growing.

To post to this group, send email to Benetea...@googlegroups.com
To unsubscribe from this group, send email to Beneteau-Owne...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/Beneteau-Owners
contact denny.we...@gmail.com, or ume...@comcast.net  if you have a list management question
---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beneteau-owne...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/0B2DBB4D-80F9-428E-AB16-7C83FFACA039%40gmail.com.




You can miss the note but you can’t miss the beat

--
Largest Beneteau group, over **1121
** members and growing.

To post to this group, send email to Benetea...@googlegroups.com
To unsubscribe from this group, send email to Beneteau-Owne...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/Beneteau-Owners
contact denny.we...@gmail.com, or ume...@comcast.net  if you have a list management question
---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beneteau-owne...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/0B2DBB4D-80F9-428E-AB16-7C83FFACA039%40gmail.com.

[Leslie Gevirtz]

Oops. Sorry that’s what happens when I all the way down.

If it is any help my 323 takes the Beneteau to 22/25 mm prop zinc. And the Beneteau donut collar 25 mm zinc. I realize your vessel is much larger, but it may give the folks at BoatZincs an idea of where to start. 

Good luck. 

On Thu, Apr 7, 2022 at 3:42 PM George Harris <gharr...@gmail.com> wrote:

[Bill Jarvis]

George,

The shaft diameter on a 440 would be 30mm.

Bill

[George Houston]

I did a bottom job in January and the shaft on my 1993 440 is 30mm. Zincs were hard to find due to supply chain issues. I bought the last two at my local west marine. I was able to use the full size zinc but have heard others only have clearance for the narrow donut. 

George

--
Largest Beneteau group, over **1121
** members and growing.

To post to this group, send email to Benetea...@googlegroups.com
To unsubscribe from this group, send email to Beneteau-Owne...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/Beneteau-Owners
contact denny.we...@gmail.com, or ume...@comcast.net  if you have a list management question
---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beneteau-owne...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/0B2DBB4D-80F9-428E-AB16-7C83FFACA039%40gmail.com.

You can miss the note but you can’t miss the beat

[George Harris]

Thankyou sooo much.

You can miss the note but you can’t miss the beat

On Apr 7, 2022, at 5:58 PM, George Houston <fiveho...@gmail.com> wrote:



To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/CAAQtLSOF-dCbZ8sjthgzVQLuyc45u4vq_9d%2BgPwAh%2B_ZABqdBQ%40mail.gmail.com.

[Jon Schultz]

440 is either 31 or 32mm 

Sent from my iPhone

On Apr 7, 2022, at 5:14 PM, Leslie Gevirtz <leslie....@gmail.com> wrote:



To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/CAMt5AdrE9jzLGHkPurNSb8PVG_HrEh06ZnJmNZ%2B38JDOLOKYjQ%40mail.gmail.com.

[Jon Schultz]

Bill,

I think you are right, I can't properly measure as she is berthed in wet storage but it also depends on the engine.

What engine do you have? I have a Perkins Prima M80 (78HP/Turbo) and shaft size may differ slightly, I would refer to the engine's specifications just to be sure.

Best,

Jon

To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/009601d84ac4%2492463630%24b6d2a290%24%40net.

[Bill Jarvis]

Jon,

 

While I no longer have my B 42s7 my 1994 unit had a Yanmar 4JH3 normally aspirated engine.

 

Bill

To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/CA%2BVAQE_fJtuEZPgzUTVttda3EGPE-ZmKcQijFGLEnUk6FB0Y_w%40mail.gmail.com.