Easy Grip

[Johanne]

Acompact ligature-resistant handle with a shaped back plate offering a modern and non-institutional appearance, designed to give excellent grip whilst remaining safe for installation in all user group areas.

Each drop of our Aircraft Grade solution has thousands of hardened aluminum cubes in a non-toxic, food-grade antifreeze carrying agent. These building blocks provide a temporary bridge between the tool and stressed fastener heads for easy screw removal and bolt removal. It has no silicone's to hinder sealing/painting operations on metal surfaces. So, no problem with worn screw removal and bolt removal operations while performing aircraft maintenance. Use EZ Grip Friction Drops. This product has met ASTM Tests for aircraft use as listed on our home page.

Our Commercial grade friction drops are ideal for home or factory use to remove worn screw removal and bolt removal. The Commercial Grade solution has thousands of hardened aluminum cubes in a non-toxic, food grade antifreeze carrying agent. These building blocks provide a temporary bridge between the tool and stressed fastener heads for easy damaged screw removal and bolt removal.

When damaged screw removal or damaged bolt removal is a problem in wet environments, such as aircraft maintenance and equipment maintenance on aircraft carrier flight decks and other ship maintenance, EZ Grip Friction Drops, Marine Grade give you the torque your tools need for worn fastener removal. For use above or below water, EZ Grip Friction Drops, Marine Grade is the answer for screw removal or bolt removal.

A. Absolutely not. The carrying agent is specifically formulated to prevent any corrosion to metal surfaces and will not attack O-rings. Click the section on our home page called: ASTM & Military Testing Results

Another thing is the carrying agent in the EZ Grip Screw Extractor product line. The drops consist of a very precisely blended formula of natural ingredients that allow the blocks to move quickly into place, form up with each other and bridge the tool/fastener surfaces, lock under pressure, and release under relief pressure. The liquid must be exactly the correct consistency to do its job but not separate.

Chemical separation will cause the blocks to spread unevenly and form into clumps. Our blending operation is precise and consistent, the ingredients exact and the overall manufacturing process a company secret, time consuming and well worth it. It is truly a miracle in a bottle.

Your tank/automotive, aviation and marine mechanics will appreciate E-Z Grip now available in the supply system under MSN 6850-01-420-9041 for wet applications and 6850-01-418-8759 for aviation and tank automotive maintenance applications.

If you are having trouble with stripped or cambered out fasteners (screw, Nut, Bolt, Allen) or your tool is worn out and won't grab (Wrench, Pliers, Socket, Pipe Wrench) or if your tool is misaligned to the fastener, and you know it might slip off and strip a fastener and bust your knuckles, you can now put a drop or more of E-Z Grip friction drops on your tool or fastener and jiggle your tool in the fastener to align particles to increase the gripping power. You can also use it as a preventative so you will not strip the fastener next time you need to remove it. Saves wear on tools and your knuckles too.

I have a friend who sent me a bottle of your product. Thinking it would not work I put it in my locker to gather dust. One night while trying to take panels off an aircraft engine I was met with frustration and skinned knuckles. I tried everything I mean everything I could think of to get these screws out. I used a Johnson Bar and even attached a breaker bar to get more leverage. Nothing was working at all! I was about to go get a drill to drill the tops of the screws off and deal with whatever damage it might cause when I remembered the bottle of EZ Grip in my locker. I figured what the heck, why not, I have already wasted hours on this already. So, I got the bottle and followed the direction and OUT they came with just a regular screwdriver! I was so happy I thought I was going to bust a gut with joy. In no time at all I had the panels off and was singing praises about your product. The jet was fixed and made the mission on time all due to your product. Since then we have ordered it for the base and everyone thinks this is the best product they have ever used. We think its better than sliced bread!!!!!!!

The product was impressive when used as you suggested for removing partially rounded out Phillips type screws. One drop of ez grip in the screw slot eliminated the cam out action of the screwdriver, and made the removal of the screw an effortless operation. Removing a stubborn screw of this type in the past would require either a special impact driver, or a chiseling, drilling and time.

These are some of the interesting uses, and applications to date. The general observation is that once a person uses this product on a problem fastener, they will use it consistently as part of the removal procedure. Most of the maintenance people agree that a bottle of ez grip should be part of their tool pouch.

Just to let you know, I was persuaded to buy this product by one of the guys who works for me. Frankly, I did not think it could do anything that it claimed. However, it is BRILLIANT stuff!

I cannot even now believe how effective it is! Even chewed up screws are easy grip and remove.

I own a 2400 sq. ft. cabinet shop in Southern California with quite a bit of machinery. Needless to say, something is always broke down or needs maintenance on it. While attempting to change blades on one of the planners, I managed to "round out" 4 of the gib bolts...and I mean "round out"! They are located in a 3/8 " wide channel that takes an 8mm open end wrench. I tried everything, as one could imagine, and got nowhere. Finally ( searching online) I found your product and thought I'd give it a try.To be honest, I did find it a little hard to believe what I was reading.Anyway, I received the ezgrip in about 3 days ( which is amazing in its self ) and went to work on those bolts. I have one thing to say " YOUR PRODUCT IS FRIGGING UNREAL!!!" 3 of the bolts came out like they were saying to me" What, we're not rounded out." The last one I had to use the" jiggle the wrench " a little more tricky... then it gripped ( unbelievable ) came right out!

This test method is intended as a means of determining the corrosive effects of aircraft maintenance chemicals on low-embrittling cadmium plating used on aircraft high-strength steel, under conditions of total immersion by quantitative measurements of weight change.

Transfer the specimens to the vessel containing the preheated maintenance chemical solution. Seal the test vessel to prevent loss of vapor. Maintain at the required temperature and expose for a period of 24 hours.

Cookies are used to provide you with the best possible shopping experience. Use the buttons below to choose if you want to accept or reject all website enhancing cookies. You can change your selection at any time on the Cookie policy page.

Nous utilisons des cookies pour vous offrir la meilleure exp\u00E9rience d'achat possible et am\u00E9liorer le fonctionnement du site Web. Utilisez les boutons ci-dessous pour accepter ou refuser ces cookies. Vous pourrez modifier votre choix \u00E0 tout moment sur la page Politique relative aux cookies.

10 bottles of 50ml liquid chalk delivered with carabiner

Designed with special drying agents, our liquid chalk gives you a strong grip in seconds and absorbs any excessive perspiration.

Ideal for indoor activities, it is suitable for all sports requiring a firm and sure grip, while avoiding the volatility of magnesium particles.

These 50ml bottles have a practical packaging because you can always have it on you..

Attention danger: this product contains ethanol CAS 64-17-5 and rosin CAS 8050-09-7, please refer to the warnings and advice shown in image 2

Decreasing price according to the quantities

10 bags of crushed chalk 200gr bulk of superior quality. i.e. a unit cost of \u20AC4.00 unit. Ideal for refilling your chalk bags or containers. To be used for all sports requiring a firm and sure grip. Specially designed to ensure a good grip.

48 superior quality \\\"BASIC\\\" EASY GRIP chalk blocks, an unbeatable unit cost of 1.02 per block

To be used for all types of sport requiring a firm and sure grip.

Specially designed to ensure a good grip.

Sold in different packaging.

Designed with special drying agents, our liquid chalk gives you a strong grip in seconds and absorbs any excessive perspiration.

Ideal for indoor activities, it is suitable for all sports requiring a sure grip, while avoiding the volatility of magnesium particles.

These 200ml bottles have a practical and economically advantageous packaging

Attention danger: this product contains ethanol CAS 64-17-5 and rosin CAS 8050-09-7, please refer to the warnings and advice shown in image 2

Decreasing price according to the quantities

Bulk 5kg kraft bag of crushed chalk

Crushed powder chalk for clubs, halls or boxes. Natural product 100% magnesium carbonate delivered in a 5 kg kraft bag. Economical product for \\\"heavy consumer\\\"!

3a8082e126