Groups

beagleg-dev

Contact owners and managers

1–30 of 60

0 selected

4/8/21

FPGA cnc control

Hey all, I am working on controlling motors with a FPGA. I discussed this with Zeller and Leonardo.

unread,

FPGA cnc control

Hey all, I am working on controlling motors with a FPGA. I discussed this with Zeller and Leonardo.

4/8/21

epu...@gmail.com, Henner Zeller3

2/16/21

Speed break before G2 and G3

Hi Henner, Thank for your answer, happy to know that there is current work on it! If there is anyway

unread,

Speed break before G2 and G3

Hi Henner, Thank for your answer, happy to know that there is current work on it! If there is anyway

2/16/21

Pierre Giusti, Hartley Sweeten9

6/4/20

Hard estop during segment motion

Hi Hartley, I have tryed it quickly this morning, and it seems to be working ! Thanks a lot for you

unread,

Hard estop during segment motion

Hi Hartley, I have tryed it quickly this morning, and it seems to be working ! Thanks a lot for you

6/4/20

Dean Gouramanis, Henner Zeller6

5/20/20

PWM frequency ?

I wrote a C++ program that works to control the hobby servo from the shell. I've been trying to

unread,

PWM frequency ?

I wrote a C++ program that works to control the hobby servo from the shell. I've been trying to

5/20/20

1/8/20

Re: BeagleG homing

On Tue, 7 Jan 2020 at 12:35, Benjamin Menkuec <benjamin...@fh-dortmund.de> wrote: Hi, I

unread,

Re: BeagleG homing

On Tue, 7 Jan 2020 at 12:35, Benjamin Menkuec <benjamin...@fh-dortmund.de> wrote: Hi, I

1/8/20

9/27/18

Hello, everyone . I'm new drawing a cnc cape sch.. It's with 19 Optocoupler isolation INPUT(

unread,

Hello, everyone . I'm new drawing a cnc cape sch.. It's with 19 Optocoupler isolation INPUT(

9/27/18

Dean Gouramanis, … Henner Zeller33

7/14/18

Positional Error

I added a 100uF cap to the VM terminals of the Gecko drives (last week). Looks like that fixed it. I

unread,

Positional Error

I added a 100uF cap to the VM terminals of the Gecko drives (last week). Looks like that fixed it. I

7/14/18

7/6/18

Heads up: fixed work coordinate setting with G10; might need changes in your coordinate system GCode

Hi, Setting a work coordinate system was not entirely standard conformant in BeagleG: The coordinates

unread,

Heads up: fixed work coordinate setting with G10; might need changes in your coordinate system GCode

Hi, Setting a work coordinate system was not entirely standard conformant in BeagleG: The coordinates

7/6/18

6/5/18

Made small changes to spindle configuration

Hi, Little heads up: I did some small changes how internally spindles are configured to have it

unread,

Made small changes to spindle configuration

Hi, Little heads up: I did some small changes how internally spindles are configured to have it

6/5/18

Henner Zeller, Craig Hollabaugh2

5/24/18

Supporting Laser cutters ?

I know that Grbl devs went through this topic, have you looked at https://github.com/gnea/grbl/wiki/

unread,

Supporting Laser cutters ?

I know that Grbl devs went through this topic, have you looked at https://github.com/gnea/grbl/wiki/

5/24/18

Henner Zeller, Hartley Sweeten2

5/15/18

Current coordinate system name output in M114

Henner, Maybe the (G55) should be after the CUBE info in case someone is just using sscanf() to parse

unread,

Current coordinate system name output in M114

Henner, Maybe the (G55) should be after the CUBE info in case someone is just using sscanf() to parse

5/15/18

Craig Hollabaugh, … Henner Zeller5

5/14/18

duh, yes, didn't clone recursively. compiles now, thanks. rm -rf beagleg git clone --recursive

unread,

duh, yes, didn't clone recursively. compiles now, thanks. rm -rf beagleg git clone --recursive

5/14/18

5/14/18

gcode2ps updates - now with isometric view

Hi, so as a preparation (procrastination?) to work on the planner over the weekend I updated gcode2ps

unread,

gcode2ps updates - now with isometric view

Hi, so as a preparation (procrastination?) to work on the planner over the weekend I updated gcode2ps

5/14/18

5/10/18

Re: beagleg feed override question

On 10 May 2018 at 08:30, Craig Hollabaugh <holl...@gmail.com> wrote: > Henner, > > I

unread,

Re: beagleg feed override question

On 10 May 2018 at 08:30, Craig Hollabaugh <holl...@gmail.com> wrote: > Henner, > > I

5/10/18

Leonardo Romor2

3/21/18

generic-gpio initialization overrides gpio values

Well, my fault, our code https://github.com/Atrasoftware/beagleg/blob/atra/src/generic-gpio.cc#L146-

unread,

generic-gpio initialization overrides gpio values

Well, my fault, our code https://github.com/Atrasoftware/beagleg/blob/atra/src/generic-gpio.cc#L146-

3/21/18

Dean Gouramanis

12/10/17

CNC build complete + new Cape promo

Hi everone, Dean here. In 2013 I started building this CNC Mill. The project started in 2011. My

unread,

CNC build complete + new Cape promo

Hi everone, Dean here. In 2013 I started building this CNC Mill. The project started in 2011. My

12/10/17

Henner Zeller, Hartley Sweeten3

9/21/17

Interesting new Beaglebone

On 21 September 2017 at 09:33, Hartley Sweeten <Hart...@visionengravers.com> wrote: > Cute.

unread,

Interesting new Beaglebone

On 21 September 2017 at 09:33, Hartley Sweeten <Hart...@visionengravers.com> wrote: > Cute.

9/21/17

Henner Zeller, Joe Meadows2

7/29/17

Please test Pull request 26

Hi Henner, Sorry for the slow reply. I tried this a few days ago and ran into some problems and I

unread,

Please test Pull request 26

Hi Henner, Sorry for the slow reply. I tried this a few days ago and ran into some problems and I

7/29/17

Rohit Nandakumar, Henner Zeller4

6/29/17

compatibility with beaglebone blue

my mistake --nohoming-required and not with homing Regards On Thursday, June 29, 2017 at 1:46:35 PM

unread,

compatibility with beaglebone blue

my mistake --nohoming-required and not with homing Regards On Thursday, June 29, 2017 at 1:46:35 PM

6/29/17

Dean Gouramanis, … Leonardo Romor5

4/27/17

Intro + absolute coordinates + jog/DRO ideas

Hi Leo. The DRO functionality should be almost finished it just need to be connected upstream. We

unread,

Intro + absolute coordinates + jog/DRO ideas

Hi Leo. The DRO functionality should be almost finished it just need to be connected upstream. We

4/27/17

Henner Zeller, Leonardo Romor2

4/26/17

Breaking into components: gcode-parser more separate

Hi, Il giorno giovedì 23 marzo 2017 12:22:25 UTC+1, Henner Zeller ha scritto: Hi, In the recent

unread,

Breaking into components: gcode-parser more separate

Hi, Il giorno giovedì 23 marzo 2017 12:22:25 UTC+1, Henner Zeller ha scritto: Hi, In the recent

4/26/17

3/23/17

'make install' and 'make dist-clean'

Hi, Hartley suggested a patch a couple of weeks back that adds a 'make install', which I'

unread,

'make install' and 'make dist-clean'

Hi, Hartley suggested a patch a couple of weeks back that adds a 'make install', which I'

3/23/17

1/2/17

Re: modification beagleg

[ also CC beagleg-dev ] On 2 January 2017 at 09:58, Henner Zeller <h.ze...@acm.org> wrote:

unread,

Re: modification beagleg

[ also CC beagleg-dev ] On 2 January 2017 at 09:58, Henner Zeller <h.ze...@acm.org> wrote:

1/2/17

Leonardo Romor, … Hartley Sweeten6

12/21/16

Continuous position/stats streamer

On Tuesday, December 20, 2016 2:06 PM, Henner Zeller wrote: > On 20 December 2016 at 03:49,

unread,

Continuous position/stats streamer

On Tuesday, December 20, 2016 2:06 PM, Henner Zeller wrote: > On 20 December 2016 at 03:49,

12/21/16

Leonardo Romor, Henner Zeller5

11/2/16

Hello Everyone, I made a branch that provides a basic pause-resume functionality plus a speed control

unread,

Hello Everyone, I made a branch that provides a basic pause-resume functionality plus a speed control

11/2/16

10/5/16

Queue status discussion (was #7 on bug)

Hi, Leonardo wrote on https://github.com/hzeller/beagleg/issues/7 On 5 October 2016 at 02:31, lromor

unread,

Queue status discussion (was #7 on bug)

Hi, Leonardo wrote on https://github.com/hzeller/beagleg/issues/7 On 5 October 2016 at 02:31, lromor

10/5/16

Henner Zeller, Hartley Sweeten3

10/1/16

IRC channel #beagleg

On 30 September 2016 at 12:08, Hartley Sweeten <Hart...@visionengravers.com> wrote: > Hi

unread,

IRC channel #beagleg

On 30 September 2016 at 12:08, Hartley Sweeten <Hart...@visionengravers.com> wrote: > Hi

10/1/16

Henner Zeller, … Hartley Sweeten13

9/22/16

Would switching to C++ 11 be something to consider ?

On 21 September 2016 at 12:13, Hartley Sweeten <Hart...@visionengravers.com> wrote: > On

unread,

Would switching to C++ 11 be something to consider ?

On 21 September 2016 at 12:13, Hartley Sweeten <Hart...@visionengravers.com> wrote: > On

9/22/16

Henner Zeller, Hartley Sweeten5

9/15/16

Parameters: now also alpha-numeric

On 15 September 2016 at 12:02, Hartley Sweeten <Hart...@visionengravers.com> wrote: > On

unread,

Parameters: now also alpha-numeric

On 15 September 2016 at 12:02, Hartley Sweeten <Hart...@visionengravers.com> wrote: > On

9/15/16

Hartley Sweeten

9/15/16

[PATCH] gcode-parser: ensure parameter file is updated before closing

Henner, This just does a fflush/fdatasync before closing the new parameter file to ensure that the

unread,

[PATCH] gcode-parser: ensure parameter file is updated before closing

Henner, This just does a fflush/fdatasync before closing the new parameter file to ensure that the

9/15/16

Search

Clear search

Close search

Google apps

Main menu