BeagleBoard

1–30 of 26169

New forum: https://forum.beagleboard.org

Home page: https://BeagleBoard.org
Live chat: https://BeagleBoard.org/chat

Links to answers to frequently asked questions are at https://BeagleBoard.org/faq. It is polite to follow the links and read the documents before posting your question.

0 selected

droland, pierric...@gadz.org3

3/8/21

ADC reading from kernel module

Hi Roland, I am not sure that I completely understand your question but have you looked at the

unread,

beaglebone-black

ADC reading from kernel module

Hi Roland, I am not sure that I completely understand your question but have you looked at the

3/8/21

robert.berger, … Stuart Longland12

12/27/20

On 21/12/20 5:59 pm, Gwen Stouthuysen wrote: > I have had an analogous issue a while ago when I

unread,

On 21/12/20 5:59 pm, Gwen Stouthuysen wrote: > I have had an analogous issue a while ago when I

12/27/20

Graham Stott, … Jeff Pollard5

5/26/20

PocketBeagle 5 volt and 3.3 volts output pins issue.

Jeff, Thanks for the explanation. It helped a lot. Graham From: beagl...@googlegroups.com [mailto:

unread,

PocketBeagle 5 volt and 3.3 volts output pins issue.

Jeff, Thanks for the explanation. It helped a lot. Graham From: beagl...@googlegroups.com [mailto:

5/26/20

ahni...@gmail.com, … sharif...@gmail.com8

7/15/20

Beaglebone AI UART access

Hi ahni, Thanks a lot for this info, I will try This out & see if UART3 Works. On Thursday, April

unread,

Beaglebone AI UART access

Hi ahni, Thanks a lot for this info, I will try This out & see if UART3 Works. On Thursday, April

7/15/20

Mridul Ahuja, … khaoz...@gmail.com10

11/18/19

BeagleBone Black UART not working

I didn't have to do this on the 9.9 2019-08-03 image or the 9.11 2019-11-02 image. I enabled the

unread,

beaglebone-black

BeagleBone Black UART not working

I didn't have to do this on the 9.9 2019-08-03 image or the 9.11 2019-11-02 image. I enabled the

11/18/19

Megha Bhirade, … Robert Heller14

7/22/19

C programing of Uart peripheral in beaglebone black (Linux)

Hi robert, thanks for reply it is working fine..

unread,

beaglebone-black

C programing of Uart peripheral in beaglebone black (Linux)

Hi robert, thanks for reply it is working fine..

7/22/19

Mike Brandon, amf3

3/9/19

UART "callibration"?

I am running at 115200. I will try and get some decent readings with my oscope. Thanks.

unread,

UART "callibration"?

I am running at 115200. I will try and get some decent readings with my oscope. Thanks.

3/9/19

Mike Brandon, … evilwulfie3

2/25/19

BBB Uart Signal Question

On 2/25/2019 10:53 AM, Mike Brandon wrote: Hi, TL;DR: What kind of signal is transmitted straight out

unread,

beaglebone-black

BBB Uart Signal Question

On 2/25/2019 10:53 AM, Mike Brandon wrote: Hi, TL;DR: What kind of signal is transmitted straight out

2/25/19

Dan Hammans, … Mala Dies14

2/15/19

Beaglebone Blue +5v won't shut down

Hello Again Dan, Seth here. I am currently working on a Flying BBBlue, too. At least, I thought this

unread,

beaglebone-blue

Beaglebone Blue +5v won't shut down

Hello Again Dan, Seth here. I am currently working on a Flying BBBlue, too. At least, I thought this

2/15/19

Sebastián Sáez, Yiling Cao3

1/8/19

UART0 garbage characters

Hey Yiling, thanks for the reply After check the documantation and use the oscilloscope, with a

unread,

UART0 garbage characters

Hey Yiling, thanks for the reply After check the documantation and use the oscilloscope, with a

1/8/19

12/8/18

Enable UART4 - bbb - 4.4.113-ti-r149

I am running into the following error using Adafruit_BBIO.UART UART.setup("UART4")

unread,

beaglebone-black

Enable UART4 - bbb - 4.4.113-ti-r149

I am running into the following error using Adafruit_BBIO.UART UART.setup("UART4")

12/8/18

gareth...@gmail.com, MG3

11/3/18

What is the recommended method to enable UARTS

Thanks MG, I ended up doing the following Updating Uboot to latest version cd /opt/scripts/tools/

unread,

seeed-beaglebone-green-wireless

What is the recommended method to enable UARTS

Thanks MG, I ended up doing the following Updating Uboot to latest version cd /opt/scripts/tools/

11/3/18

9/8/18

Serial Port Problem During AUto RUN

my Pgm is Working from Cloud RUN but not Working During Auto RUN after Power ON..others parts of Pgm

unread,

beaglebone-black

Serial Port Problem During AUto RUN

my Pgm is Working from Cloud RUN but not Working During Auto RUN after Power ON..others parts of Pgm

9/8/18

Pablo Rodriguez3

8/27/18

omap serial driver rs485 loopback

Adding rs485-rx-during-tx to the .dts do the trick. fragment@2 { target = <&uart2>;

unread,

beaglebone-black

omap serial driver rs485 loopback

Adding rs485-rx-during-tx to the .dts do the trick. fragment@2 { target = <&uart2>;

8/27/18

8/6/18

Disable serial debug on UART0 and enable it on UART4

I was able to answer my first question based on this discussion: Typing "systemctl mask serial-

unread,

Disable serial debug on UART0 and enable it on UART4

I was able to answer my first question based on this discussion: Typing "systemctl mask serial-

8/6/18

Tomas Medina, … Brandon Sights6

7/9/18

Reading values from RPLIDAR via UART

Yes I am running the program as a root user On Monday, July 9, 2018 at 10:25:54 AM UTC-4, Brandon

unread,

beaglebone-black-wireless

Reading values from RPLIDAR via UART

Yes I am running the program as a root user On Monday, July 9, 2018 at 10:25:54 AM UTC-4, Brandon

7/9/18

Pablo Rodriguez, Jeff Andich2

6/27/18

I can confirm that you can use the OMAP driver with kernel version, 4.4.110, as that's what we

unread,

beaglebone-black

I can confirm that you can use the OMAP driver with kernel version, 4.4.110, as that's what we

6/27/18

6/20/18

UART1 can receive date but can not send (TX not working)

Hi, i'm using BBBW to receive GPS signal, i enable uart1 and using following commands: config-pin

unread,

beaglebone-black-wireless

UART1 can receive date but can not send (TX not working)

Hi, i'm using BBBW to receive GPS signal, i enable uart1 and using following commands: config-pin

6/20/18

rj...@umich.edu, … Robert Nelson19

7/2/18

BBIO_UART issues

On Mon, Jul 2, 2018 at 2:50 PM, <mary.m...@gmail.com> wrote: > I did the following on the

unread,

beaglebone-black

BBIO_UART issues

On Mon, Jul 2, 2018 at 2:50 PM, <mary.m...@gmail.com> wrote: > I did the following on the

7/2/18

8/6/18

RS485 RTS Line Toggling Available in FTDI USB<->Serial Hub Chips - Has Anyone Tried This?

First of all, my statement was incorrect. There is no EEPROM on the FTDI FT4232H USB<->4

unread,

beagleboard-x15

RS485 RTS Line Toggling Available in FTDI USB<->Serial Hub Chips - Has Anyone Tried This?

First of all, my statement was incorrect. There is no EEPROM on the FTDI FT4232H USB<->4

8/6/18

Mala Dies, … Dennis Lee Bieber37

5/18/18

RE: L298 and Interfacing w/ the BBB/Trying!

Hello Sir, Seth here. I wrote some new software for the item that was in question. The idea you told

unread,

beaglebone-black

RE: L298 and Interfacing w/ the BBB/Trying!

Hello Sir, Seth here. I wrote some new software for the item that was in question. The idea you told

5/18/18

3/29/18

DSMX connection error

Hi All, I am trying to connect spektrum dsm8 receiver. After binding the receiver I connected to the

unread,

beaglebone-blue

DSMX connection error

Hi All, I am trying to connect spektrum dsm8 receiver. After binding the receiver I connected to the

3/29/18

Kenny Koller, Przemek Klosowski4

1/22/18

Scheduling Latency of a Blocking UART Read.

Another detail is that I have had serial port code running for more than year on several hundred

unread,

beaglebone-black

Scheduling Latency of a Blocking UART Read.

Another detail is that I have had serial port code running for more than year on several hundred

1/22/18

11/10/17

UART0 loopback test not working consistently

Hello all, I've been compiling and testing various RoboticsCape example codes on the BBBlue. The

unread,

beaglebone-blue

UART0 loopback test not working consistently

Hello all, I've been compiling and testing various RoboticsCape example codes on the BBBlue. The

11/10/17

11/1/17

RE: Serial Communication Via XBee, BBB, and AT Commands/Yea Boy!

Hello Again, I had to do some research on XBee pin spacing and breadboards. The "dog-gone"

unread,

beaglebone-black

RE: Serial Communication Via XBee, BBB, and AT Commands/Yea Boy!

Hello Again, I had to do some research on XBee pin spacing and breadboards. The "dog-gone"

11/1/17

Dennis Lee Bieber

9/21/17

Re: Is There a Bug in the Autorun Software?

On Wed, 20 Sep 2017 20:55:59 -0700 (PDT), Mala Dies <fun...@gmail.com> declaimed the following:

unread,

seeed-beaglebone-green-wireless

Re: Is There a Bug in the Autorun Software?

On Wed, 20 Sep 2017 20:55:59 -0700 (PDT), Mala Dies <fun...@gmail.com> declaimed the following:

9/21/17

Tomas Medina, … Jeff Andich6

9/9/17

UART1 Isn't Reading

Hi, I'm also having some issues enabling/disabling UART1, 2 through the device tree, am57xx-evm-

unread,

beaglebone-black-wireless

UART1 Isn't Reading

Hi, I'm also having some issues enabling/disabling UART1, 2 through the device tree, am57xx-evm-

9/9/17

Alek Mabry, Drew Fustini2

7/30/17

Differences Between GPS's BeagleBone Blue

Jason tells me that Sparkfun is the easiest due to the cable compatibility. It doesn't have a big

unread,

beaglebone-blue

Differences Between GPS's BeagleBone Blue

Jason tells me that Sparkfun is the easiest due to the cable compatibility. It doesn't have a big

7/30/17

Hồng Quân Nguyễn, … Jeff Andich9

10/17/17

Failed to enable UART1, Ubuntu 16.04

Glad I saw this post! I was able to enable UART1 and confirm that the BBB talks to the UART on my

unread,

beaglebone-black

Failed to enable UART1, Ubuntu 16.04

Glad I saw this post! I was able to enable UART1 and confirm that the BBB talks to the UART on my

10/17/17

sajeevan k, Robert Nelson2

7/12/17

Can UART5 and LCD Display work at the same time in BBB RevC ?

On Wed, Jul 12, 2017 at 7:18 AM, sajeevan k <saje...@laxven.com> wrote: > > > Hi all

unread,

beaglebone-black

Can UART5 and LCD Display work at the same time in BBB RevC ?

On Wed, Jul 12, 2017 at 7:18 AM, sajeevan k <saje...@laxven.com> wrote: > > > Hi all

7/12/17

Search

Clear search

Close search

Google apps

Main menu