bitbake blues

[Mark A. Yoder]

I'm try to get QT installed via bitbake.  I'm following the instructions at [1] with a slight variation:

$ git clone git://git.angstrom-distribution.org/setup-scripts oe

$ cd oe

$ MACHINE=beagleboard ./oebb.sh config beagleboard

$ MACHINE=beagleboard ./oebb.sh update

$ . ~/.oe/environment-2008

$ bitbake wpa-gui

After about 6 minutes this ends in the error:

NOTE: Running task 26 of 4564 (ID: 37, /home/yoder/BeagleBoard/oe/sources/openembedded/recipes/quilt/quilt-native_0.48.bb, do_package_write_ipk)

ERROR: Logfile of failure stored in: /dev/null

Log data follows:

NOTE: package quilt-native-0.48-r7.1: task sysroot_stage_all: Failed

ERROR: Function 'sysroot_stage_all' failed (see /dev/null for further information)

ERROR: Task 23 (/home/yoder/BeagleBoard/oe/sources/openembedded/recipes/quilt/quilt-native_0.48.bb, do_populate_sysroot) failed with exit code '1'

Waiting for 1 active tasks to finish:

0: quilt-native-0.48-r7.1 do_package_write_ipk (pid 30971)

NOTE: package quilt-native-0.48-r7.1: task do_package_write_ipk: Started

NOTE: package quilt-native-0.48-r7.1: task do_package_write_ipk: Succeeded

ERROR: '/home/yoder/BeagleBoard/oe/sources/openembedded/recipes/quilt/quilt-native_0.48.bb' failed

The whole output is here [2].  I'm running Ubuntu 10.4.  The oe directory was initially empty.  I even removed the ~/.oe/environment from a previous install.

Anyone have suggestions on what to do next?

--Mark

[1] http://www.angstrom-distribution.org/building-angstrom

[2] http://pastebin.com/P0s8QNur

[Jason Kridner]

Did you delete the temp directory and try again? Given that you'd
done another build before this setup, I'm wondering if there is a
chance you have some stale bits in the picture.

> --Mark
> [1] http://www.angstrom-distribution.org/building-angstrom
> [2] http://pastebin.com/P0s8QNur
>

> --
> You received this message because you are subscribed to the Google Groups
> "Beagle Board" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/beagleboard/-/t2k7slKnHmEJ.
> To post to this group, send email to beagl...@googlegroups.com.
> To unsubscribe from this group, send email to
> beagleboard...@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/beagleboard?hl=en.
>