Setting UART speed on BBB Rev C

[Pierce Nichols]

Hi all,

I posted this to the Beaglebone list as well, but it seems a bit dead
so I'm reposting here.

I would like to find a way to set the speed of the UARTs to something
other than the standard speeds offered by termios.

I'm running a BBB Rev C with Debian 8.3, stock kernel from
beaglebone.org. I'm using the universal cape and config-pin for setup
(because it works well enough, so far). I currently have it working
with a serial speed of 115.2 kbps, but the listener can't handle any
of the standard termios speeds above that. It can handle 250, 500, or
1000 kbps, however. How can I set the BBB UARTs to operate at one of
those speeds?

-p

PS -- I've considered shifting over to SPI on the next hardware rev,
but that will be a little bit and I'd like more speed now.

--
Pierce Nichols
Principal Engineer
Logos Electromechanical, LLC

[William Hermans]

https://groups.google.com/forum/#!searchin/beagleboard/Problemas$20para$20comunicar$20com$20o$20Baud$20Rate$205760/beagleboard/GC0rKe6rM0g/13c1ngXF7owJ

Read the posts by Peter Hurley

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAENK0Pz5t2FyDi-b42krTfZayFEUB_vBV%2BqqiKKFtz0NKFK0TQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[Pierce Nichols]

Thanks! It compiles... testing in the morning. :)

-p

> https://groups.google.com/d/msgid/beagleboard/CALHSORr2KC9Aw0wzC_%2BsrBb9pGdZ-HYR%3DyzwBHtW6HWgXW0Pxg%40mail.gmail.com.

> For more options, visit https://groups.google.com/d/optout.