Pocket beaglebone CAN is not working

38 views
Skip to first unread message

indra....@gmail.com

unread,
Nov 25, 2018, 2:58:53 PM11/25/18
to BeagleBoard
Hi,
Last week I got my pocket beaglebone.
I am trying  CAN communication. So for that I have added CAN device tree overlay in uEnx.txt as I did with beaglebone enhanced.

But after booting when I am setting up network interface it is not working.
When I did same thing with beaglebone enhanced board it is working properly.
What extra changes I need to do to make this work.

I am using IoT image without GUI from official website.
Please guide me on this.

Drew Fustini

unread,
Dec 25, 2018, 9:19:40 AM12/25/18
to Beagle Board
Hello, are you still having this issue?

Thanks
Drew

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/88f19853-6544-4d2c-aa29-0301227ef4c8%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Indrajit Lawande

unread,
Dec 25, 2018, 4:53:57 PM12/25/18
to beagl...@googlegroups.com
Hi,
My problem is solved and CAN is working properly. Here is what is did
1. Made changes in /boot/uEnv.txt by adding device tree overlay.
2. After rebooting up using dmsg checked whether network interface is registered or not - it is showing CAN network registered.
3. After that I just configured nete interface using
 sudo ip link set can0 type can bitrate xxxxxx , ip link set up can0 
4. This is step what I was missing -  changing pin configuration 
 config-pin P1.26/28 can 
After this everything is working properly .


Thanks.
3. 

You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/qp2oxRPAgyU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAEf4M_BYmBr4hXN-AP0auzGN7%2BGx0m67AMrYppM0GZ08NzR9Rw%40mail.gmail.com.
Reply all
Reply to author
Forward
0 new messages