Can't get into 192.168.7.2 for BeagleBone!!! But It does work with LCD7 display.

[Xicheng Xu]

Hi everyone

I guess logging into 192.168.7.2 is the very first step to play with BeagleBone RevA6a( not BeagleBone Black), but I can't do it. 

It works with the LCD7 display while having trouble with logging into 192.168.7.2 or shh with either Chrome or Firefox.( With newest Angstrom)

Clueless now, Any one can help?

Thank you

[Juan C.]

Try opening it directly from My Computer.

Go to My Computer>BeagleBone Getting Started(E:)>Left Click Start.htm file and Open With Google Chrome

On the top left of the screen, it should highlight 'Step 1: Plug in BB via USB and Step 2. Install Drivers' in Green. If they aren't, you need to update your drivers here: http://beagleboard.org/Getting%20Started#step2

If they are both highlighted green, scroll down to Step #3: Browse to your board and press the Click here to launch: http://192.168.7.2 button. Give it a minute and it should say your board is connected at the top.

[Xicheng Xu]

Thanks for the reply.

I opened Start.htm and still could not get into 192.168.7.2 through the link there.

Drivers are updated and none of the STEPs is highlighted green.

Btw STEPs are only available at  http://beagleboard.org/Getting%20Started#step2.

[Gerald Coley]

If they are not green  then you are not connected. You need to be connected to connect to that address.

Gerald

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--

Gerald

 

ger...@beagleboard.org

g-co...@ti.com

http://beagleboard.org/

http://circuitco.com/support/

[debb...@gmail.com]

Hi,

I got my beaglebone today and accessing it from Windows.

Initial setup worked fine. But later could not login via ssh or 192.168.7.2. After searching I discovered that DHCP was not enabled.

Quick test: type ping 192.168.7.2 in your windows console. If you receive a return message that contain "expired in transit" then enable DHCP for the respective network adapter.

Regards

[liamga...@gmail.com]

Getting request timed out. Packets sent 4, received 0. 

[Hashim Khan]

I'm getting the same problem and my DHCP is enabled.

[honggang wang]

most of the case, the following steps work:

1. restore the /etc/network/interfaces file  to the original one, namely only  set:

   auto lo

iface lo inet loopback

 iface usb0 inet static

    address 192.168.7.2

    netmask 255.255.255.252

    network 192.168.7.0

    gateway 192.168.7.1

2. apt-get update & apt-get upgrade

3. reboot

4. all done!
在 2017年7月8日星期六 UTC-4下午4:23:28，Hashim Khan写道：

[Zh Zh]

Hey, i've got into the same problem as yours... Have you solved this problem?