connman issues on latest Debian 8.4 release?

287 views
Skip to first unread message

Mike Erdahl

unread,
May 18, 2016, 8:08:20 PM5/18/16
to BeagleBoard

Accidentally posted this on the beaglebone google group... annoying.

connman works just fine for my three different RTL81xx based USB WIFI adapters on the Debian Jessie 8.3 bb.org release, but wifi seems dead on the Debian Jessie 8.4 bb.org release (wifi scan either hangs, or does not find anything).  Same behavior on BeagleBone Black and Green, powered with external bricks.

I run on both 8.3 and 8.4:

$ sudo su
# connmanctl
connmanctl> enable wifi
connmanctl> scan wifi
connmanctl> services

At this point, I either see my AP (Jessie 8.3), or nothing (Jessie 8.4)

Checking 'technologies' on both releases does show WiFi is present, and powered.

Is there any config magic required before using connman with Debian 8.4 bb.org release?  Unfortunately I overwrote my SD card before capturing the kernel log, but it seemed like the rtl firmware was loading fine, with no errors being reported.

Regards,
Mike

Robert Nelson

unread,
May 18, 2016, 8:52:18 PM5/18/16
to Beagle Board, mike....@gmail.com
Hi Mike

We have tether'ing enabled out of the box, so you need to disable that:

$ sudo su
# connmanctl
connmanctl> tether wifi off
connmanctl> enable wifi
connmanctl> scan wifi
connmanctl> services

then it'll work just fine. ;)

Regards,

--
Robert Nelson
https://rcn-ee.com/

Mike Erdahl

unread,
May 19, 2016, 6:10:32 PM5/19/16
to BeagleBoard, mike....@gmail.com
Hi Robert,

Thanks a bunch!

I appreciate your quick response- sorry if this was posted somewhere already.  I did not know tethering would cause this, and probably never would have tried disabling it :)

Regards,
Mike

John Syne

unread,
May 19, 2016, 6:15:54 PM5/19/16
to beagl...@googlegroups.com
Hi Robert,

I would think that the need for tethering would be the exception so I’m not sure why you would set this on by default.

Regards,
John




-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgfNVZ67hGbBurH19Y41kvmwXtsizx8R74Fg44iVDJoSg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply all
Reply to author
Forward
0 new messages