BBB server images

[geohei]

Hi.

So far I only found desktop images (with graphical user interface) for my brand new BBB.

Are there (pure) server images available?

If yes, for which distributions, where to find ... ?

Thanks,

[Drew Fustini]

You should use the console image:
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW.2FBBB.2FBBG_.28All_Revs.29

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[geohei]

So this would be this one:

https://rcn-ee.com/rootfs/bb.org/release/2015-11-03/console/bone-debian-7.9-console-armhf-2015-11-03-2gb.img.xz

or even better this one:

https://rcn-ee.com/rootfs/bb.org/release/2015-11-03/console/BBB-eMMC-flasher-debian-7.9-console-armhf-2015-11-03-2gb.img.xz

Is that correct?

Sorry ... newbie ... :(

[Drew Fustini]

On Sat, Feb 6, 2016 at 10:19 AM, geohei <georges....@gmail.com> wrote:
> https://rcn-ee.com/rootfs/bb.org/release/2015-11-03/console/bone-debian-7.9-console-armhf-2015-11-03-2gb.img.xz

Yeah, this would run Debian 7.9 (Wheezy) from microSD card with a
minimal number of pre-installed packages (e.g. "console", no GUI
Desktop).

> https://rcn-ee.com/rootfs/bb.org/release/2015-11-03/console/BBB-eMMC-flasher-debian-7.9-console-armhf-2015-11-03-2gb.img.xz

This would be the same software as above but it would install
("flash") it onto the BeagleBone's on-board storage (eMMC). It will
take some additional time over the above method, but then you don't
need to boot off microSD card in the future.

Personally, I prefer to always use the microSD images and not use the
eMMC-flasher image. I like being able to easily swap microSD cards to
run different versions of Debian depending on the project I'm working
on.

cheers,
drew

[Dennis Lee Bieber]

On Sat, 6 Feb 2016 08:19:27 -0800 (PST), geohei
<georges....@gmail.com> declaimed the
following:

>So this would be this one:
>
>https://rcn-ee.com/rootfs/bb.org/release/2015-11-03/console/bone-debian-7.9-console-armhf-2015-11-03-2gb.img.xz
>
>or even better this one:
>
>https://rcn-ee.com/rootfs/bb.org/release/2015-11-03/console/BBB-eMMC-flasher-debian-7.9-console-armhf-2015-11-03-2gb.img.xz
>

As the name implies, the second one is going to automatically reflash
the eMMC that is on the BBB. The first one will leave the eMMC alone and
boot from the uSD card (unless a file is modified to specify that it should
act as a flasher instead)
--
Wulfraed Dennis Lee Bieber AF6VN
wlf...@ix.netcom.com HTTP://wlfraed.home.netcom.com/

[geohei]

Ok. That makes it very clear now.
Thanks a lot for the explanations!

[geohei]

One more question ...

What about The Jessie (8.3) eMMC console versions?
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Jessie_Snapshot_console
They are still inside the directory "testing".
Are they unstable meaning should I avoid these?

On Saturday, February 6, 2016 at 2:40:24 PM UTC+1, Drew Fustini wrote:

[Robert Nelson]

On Sun, Feb 7, 2016 at 8:56 AM, geohei <georges....@gmail.com> wrote:
> One more question ...
>
> What about The Jessie (8.3) eMMC console versions?
> http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Jessie_Snapshot_console
> They are still inside the directory "testing".
> Are they unstable meaning should I avoid these?

"testing" doesn't mean "unstable"..

"testing" just means they aren't directly listed on:

http://beagleboard.org/latest-images

until they do, like 2016-01-24 ...

Regards,

--
Robert Nelson
https://rcn-ee.com/