Unable to boot after 'apt upgrade' to Debian 9.13

217 views
Skip to first unread message

Hartley Sweeten

unread,
Aug 22, 2020, 1:47:31 PM8/22/20
to BeagleBoard
Hello all,

I had an old Debian 9.9 console image on my BBB and did an apt upgrade that bumped it to Debian 9.13. Now the board does not boot.

If I hook up a serial console I see it keeps stopping at:

Starting kernel ...

[    0.001033] clocksource_probe: no matching clocksources found
[    1.312908] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[    1.487471] omap_hsmmc 481d8000.mmc: prop pinctrl-0 index 0 invalid phandle
[    1.522392] omap_voltage_late_init: Voltage driver support not added
[    1.529573] PM: Cannot get wkup_m3_ipc handle
[    1.807980] bone_capemgr bone_capemgr: slot #0: No cape found
[    1.839062] bone_capemgr bone_capemgr: slot #1: No cape found
[    1.871759] bone_capemgr bone_capemgr: slot #2: No cape found
[    1.904436] bone_capemgr bone_capemgr: slot #3: No cape found
Gave up waiting for root file system device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  /dev/mmcblk1p1 does not exist.  Dropping to a shell!
(initramfs)

Is there any way to fix this other than reflashing?

Thanks

jonnymo

unread,
Aug 22, 2020, 2:28:22 PM8/22/20
to Beagle Board

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/960431ee-a19f-4425-b2c5-b06f4ec63229o%40googlegroups.com.

Hartley Sweeten

unread,
Aug 22, 2020, 4:04:00 PM8/22/20
to BeagleBoard

Hi Jon,

I have already seen that post. It doesn't help since it requires reflashing the board.

I had another board that I did the same 'apt update/upgrade' on and had the same problem.

BTW, If have not been able to get that board to reflash, it keeps giving me some strange error message about the SD-Card, still have not figured that out. The SD-Card worked fine on a different BBB.

I would like to know if there is a way to fix this without reflashing the board.

I guess a bigger question is - Does upgrading the console image from Debian 9.9 to 9.13 actually work?

Hartley

jonnymo

unread,
Aug 22, 2020, 4:35:07 PM8/22/20
to Beagle Board
Could you post the strange message you are seeing regarding the uSD card?

For me, going from 9.9 to 9.13 and beyond, I would just do a reflash of the image.

Which rev of BBB do you have?  Rev B or Rev C?

Robert is the master of this so I would think his suggestions would clear the issue.

Cheers,

Jon 

To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a55e5f2b-e111-4624-ae1c-41419050a951n%40googlegroups.com.

Robert Nelson

unread,
Aug 22, 2020, 4:57:51 PM8/22/20
to Beagle Board
Let's see your serial boot log from j1 header to see where it's getting stick..

To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG99bkqAMNPGsruTihkOjT9cykvcUycrgc8%3DXj7zGV5yoH%2BwUA%40mail.gmail.com.

Hartley Sweeten

unread,
Aug 22, 2020, 6:14:55 PM8/22/20
to BeagleBoard
Hi Robert,

Quick background on this.

I have a "standard" image I use that is based on the Console Debian 9 image. I usually keep it pretty up-to-date but have not updated it since Debian 9.9.

I was trying to update it to the latest Debian 9.13 using apt update/upgrade. This has always worked in the past.

But going from 9.9 to 9.13 I can no longer get the BeagleBone Black to boot. This has happened on 2 different BeagleBone Black's so far.

Here is the serial log:

---

U-Boot SPL 2018.01-00002-g9aa111a004 (Jan 20 2018 - 12:45:29)
Trying to boot from MMC2


U-Boot 2018.01-00002-g9aa111a004 (Jan 20 2018 - 12:45:29 -0600), Build: jenkins-github_Bootloader-Builder-32

CPU  : AM335X-GP rev 2.1
I2C:   ready
DRAM:  512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Power-on reset has occurred.
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment

Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net:   eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00C0] ...
Card did not respond to voltage select!
mmc_init: -95, time 12
Card did not respond to voltage select!
mmc_init: -95, time 13
Card did not respond to voltage select!
mmc_init: -95, time 13
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
Card did not respond to voltage select!
mmc_init: -95, time 13
Card did not respond to voltage select!
mmc_init: -95, time 13
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc1(part 0) is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
2190 bytes read in 15 ms (142.6 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-4.9.105-ti-r114 ...
9818560 bytes read in 636 ms (14.7 MiB/s)
uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ...
uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ...
loading /boot/dtbs/4.9.105-ti-r114/am335x-boneblack-uboot.dtb ...
61638 bytes read in 44 ms (1.3 MiB/s)
uboot_overlays: [fdt_buffer=0x60000] ...
uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ...
1584 bytes read in 219 ms (6.8 KiB/s)
uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ...
4915 bytes read in 64 ms (74.2 KiB/s)
uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ...
867 bytes read in 204 ms (3.9 KiB/s)
uboot_overlays: unable to find [mmc 1:1 /lib/firmware/univ-bbb-EVA-00A0.dtbo]...
loading /boot/initrd.img-4.9.105-ti-r114 ...
5790384 bytes read in 380 ms (14.5 MiB/s)
debug: [console=ttyO0,115200n8 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] ...
debug: [bootz 0x82000000 0x88080000:585ab0 88000000] ...
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Ramdisk to 8fa7a000, end 8ffffab0 ... OK
   reserving fdt memory region: addr=88000000 size=71000
   Loading Device Tree to 8fa06000, end 8fa79fff ... OK

Starting kernel ...

[    0.001030] clocksource_probe: no matching clocksources found
[    1.313075] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[    1.487481] omap_hsmmc 481d8000.mmc: prop pinctrl-0 index 0 invalid phandle
[    1.522508] omap_voltage_late_init: Voltage driver support not added
[    1.529663] PM: Cannot get wkup_m3_ipc handle
[    1.807970] bone_capemgr bone_capemgr: slot #0: No cape found
[    1.839041] bone_capemgr bone_capemgr: slot #1: No cape found
[    1.871724] bone_capemgr bone_capemgr: slot #2: No cape found
[    1.904358] bone_capemgr bone_capemgr: slot #3: No cape found
Gave up waiting for root file system device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  /dev/mmcblk1p1 does not exist.  Dropping to a shell!
(initramfs)
---

The first BeagleBone Black I tried this on failed the exact same way but I had a power bump so thought maybe the rootfs just got corrupted somehow.

I installed my "standard" image to a new BeagleBone Black and tried the apt update/upgrade again. Now this one is doing the same thing.

I also tried reflashing the first one but that failed during the uBoot stage with some error about the SD-Card not resetting. That BeagleBone Black is at work (along with my "standard" image SD-Card).

On Monday I will get both the original BeagleBone Black (as long as it didn't get tossed) and the SD-Card and try reflashing them again.

In the meantime I'm hoping to find a solution to get this board to boot.

Thanks for any help,
Hartley

Robert Nelson

unread,
Aug 23, 2020, 12:13:23 PM8/23/20
to Beagle Board
Want to remove "quiet" so we can see what really failed?

Regards,

--
Robert Nelson
https://rcn-ee.com/

Hartley Sweeten

unread,
Aug 23, 2020, 12:18:52 PM8/23/20
to BeagleBoard
Robert,

Glad to... How?

I know I can edit /boot/uEnv.txt to remove the "quiet" but the board is not booting...

How do I remove it from uBoot?

Hartley

Hartley Sweeten

unread,
Oct 23, 2020, 5:12:37 PM10/23/20
to BeagleBoard
Ok, this happened again. I forgot that an 'apt upgrade' breaks my setup.

I reinstalled my default image on the BBB. For reference:

~$ cat /etc/dogtag
BeagleBoard.org Debian Image 2018-01-21
~$ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description:    Debian GNU/Linux 9.9 (stretch)
Release:        9.9
Codename:       stretch

Not sure what other information may be helpful.

This install has worked for me with no issues for quite a while. But, it's pretty behind and should be upgraded:

~$ sudo apt upgrade
...
127 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 86.5 MB of archives.
After this operation, 1,395 kB disk space will be freed.

But it appears every time I try an 'apt upgrade' it _seems_ to go ok but when I reboot I get the error about:

[    0.001030] clocksource_probe: no matching clocksources found
[    1.313075] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[    1.487481] omap_hsmmc 481d8000.mmc: prop pinctrl-0 index 0 invalid phandle
[    1.522508] omap_voltage_late_init: Voltage driver support not added
[    1.529663] PM: Cannot get wkup_m3_ipc handle
[    1.807970] bone_capemgr bone_capemgr: slot #0: No cape found
[    1.839041] bone_capemgr bone_capemgr: slot #1: No cape found
[    1.871724] bone_capemgr bone_capemgr: slot #2: No cape found
[    1.904358] bone_capemgr bone_capemgr: slot #3: No cape found
Gave up waiting for root file system device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  /dev/mmcblk1p1 does not exist.  Dropping to a shell!
(initramfs)

Does anyone have an suggestions or ideas about why this is not working?

Thanks,
Hartley

Robert Nelson

unread,
Oct 23, 2020, 5:53:22 PM10/23/20
to Beagle Board
On Fri, Oct 23, 2020 at 4:12 PM Hartley Sweeten <biggu...@gmail.com> wrote:
>
> Ok, this happened again. I forgot that an 'apt upgrade' breaks my setup.
>
> I reinstalled my default image on the BBB. For reference:
>
> ~$ cat /etc/dogtag
> BeagleBoard.org Debian Image 2018-01-21

Can you share the "file" name of this image? Such that i can test.

Hartley Sweeten

unread,
Oct 23, 2020, 6:15:06 PM10/23/20
to BeagleBoard
Robert,

I really can't remember what the original image file was that I started with. I only have the /etc/dogtag info.

The image "file" I am using is one I created using the /opt/scripts/tools/eMMC/beaglebone-black-make-microSD-flasher-from-eMMC.sh script. This was done after installing the original image and then installing just what I needed for some Qt development.

I did remember to remove the "quiet" from the command line after installing the image again. I then tried doing an 'apt install ..' for individual packages that needed updated. It appears one of the openssh packages is what is breaking the boot.

I got this after updating openssh-client, openssh-server, openssh-sftp-server, and openssl:

[    3.270685] Freeing unused kernel memory: 1024K
Loading, please wait...
[    3.311056] usb 1-1.1: new full-speed USB device number 3 using musb-hdrc
starting version 232
[    3.367799] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.384045] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.393865] random: udevadm: uninitialized urandom read (16 bytes read)
[    3.425391] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c534
[    3.439037] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.455036] usb 1-1.1: Product: USB Receiver
[    3.463011] usb 1-1.1: Manufacturer: Logitech
[    3.492331] input: Logitech USB Receiver as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C534.0001/input/input1
[    3.587187] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-musb-hdrc.1-1.1/input0
[    3.629415] input: Logitech USB Receiver as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input2
[    3.722058] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-musb-hdrc.1-1.1/input1
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
done.
Gave up waiting for root file system device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  /dev/mmcblk1p1 does not exist.  Dropping to a shell!
(initramfs)

A quick google search says that there may be a problem with the UUID. Isn't the SDcard flasher supposed to set that?

Hartley

Hartley Sweeten

unread,
Oct 23, 2020, 6:58:15 PM10/23/20
to BeagleBoard
I tried adding the UUID (found with blkid) to my uEnv.txt. Same result.

1) Install SDcard image
2) Boot
3) sudo apt update
4) sudo apt upgrade
5) Reboot, system hangs

It does change the message:

Begin: Running /scripts/local-block ... done.
done.
Gave up waiting for root file system device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  UUID=0159e561-b327-492f-a73a-b188b2217267 does not exist.  Dropping to a shell!
(initramfs)

Hartley

Robert Nelson

unread,
Oct 23, 2020, 7:15:43 PM10/23/20
to Beagle Board
It was around the v4.4.x era we stopped using uuid, as we had a kernel fix..

Do you have a serial cable you can plug into J1 so we can see what
u-boot is doing?

Hartley Sweeten

unread,
Oct 23, 2020, 7:15:54 PM10/23/20
to BeagleBoard
OK, another annoyance...

I jut reinstalled my SDcard image and the UUID changed.

The last install (that broke after the apt upgrade) was 0159e561-b327-492f-a73a-b188b2217267.
After this install its now 60fc6cad-2e3f-408d-a2f8-5f2320240203.

Is it possible that something during the apt upgrade is changing the mmcblk1p1 UUID?

Aside... I can kind of understand why the system will not boot if the UUID changes but prior to adding the UUID= to uEnv.txt my system was booting from /dev/mmcblk1p1. That _should_ have still worked but it didn't.

Getting rather annoyed by this....

Hartley

Hartley Sweeten

unread,
Oct 23, 2020, 7:17:25 PM10/23/20
to BeagleBoard
The serial cable is plugged in. What do you want me to do?

Hartley Sweeten

unread,
Oct 23, 2020, 7:20:12 PM10/23/20
to BeagleBoard
Here is the uBoot output before I do an 'apt upgrade'

U-Boot SPL 2018.01-00002-g9aa111a004 (Jan 20 2018 - 12:45:29)
Trying to boot from MMC2


U-Boot 2018.01-00002-g9aa111a004 (Jan 20 2018 - 12:45:29 -0600), Build: jenkins-github_Bootloader-Builder-32

CPU  : AM335X-GP rev 2.1
I2C:   ready
DRAM:  512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
2295 bytes read in 15 ms (149.4 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-4.9.105-ti-r114 ...
9818560 bytes read in 638 ms (14.7 MiB/s)
uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ...
uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ...
loading /boot/dtbs/4.9.105-ti-r114/am335x-boneblack-uboot.dtb ...
61638 bytes read in 42 ms (1.4 MiB/s)
uboot_overlays: [fdt_buffer=0x60000] ...
uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ...
1440 bytes read in 165 ms (7.8 KiB/s)
uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ...
4896 bytes read in 58 ms (82 KiB/s)
uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ...
711 bytes read in 134 ms (4.9 KiB/s)
uboot_overlays: loading /lib/firmware/univ-bbb-EVA-00A0.dtbo ...
62064 bytes read in 235 ms (257.8 KiB/s)
loading /boot/initrd.img-4.9.105-ti-r114 ...
5801348 bytes read in 383 ms (14.4 MiB/s)
debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0] ...
debug: [bootz 0x82000000 0x88080000:588584 88000000] ...
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Ramdisk to 8fa77000, end 8ffff584 ... OK
   reserving fdt memory region: addr=88000000 size=7e000
   Loading Device Tree to 8f9f6000, end 8fa76fff ... OK

Starting kernel ...

Robert Nelson

unread,
Oct 23, 2020, 7:46:33 PM10/23/20
to Beagle Board
Okay that's better, nothing wrong going on their..

can you share the rest of the boot?

Hartley Sweeten

unread,
Oct 23, 2020, 7:50:32 PM10/23/20
to BeagleBoard
Here's the rest. This is all before the 'apt upgrade'.

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.105-ti-r114 (root@a5-imx6q-wandboard-2gb) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP PREEMPT Fri Aug 17 11:05:53 UTC 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: TI AM335x BeagleBone Black
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 48 MiB at 0x9c800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon)
[    0.000000] percpu: Embedded 15 pages/cpu @df902000 s31820 r8192 d21428 u61440
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129412
[    0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 440220K/522240K available (12288K kernel code, 1139K rwdata, 4324K rodata, 1024K init, 459K bss, 32868K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0000000 - 0xff800000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdfe00000   ( 510 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0d00000   (13280 kB)
[    0.000000]       .init : 0xc1300000 - 0xc1400000   (1024 kB)
[    0.000000]       .data : 0xc1400000 - 0xc151cd58   (1140 kB)
[    0.000000]        .bss : 0xc151e000 - 0xc1590ff0   ( 460 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000]  RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000051] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000066] OMAP clocksource: timer1 at 24000000 Hz
[    0.002095] clocksource_probe: no matching clocksources found
[    0.002417] Console: colour dummy device 80x30
[    0.002452] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.002461] This ensures that you still see kernel messages. Please
[    0.002469] update your kernel commandline.
[    0.002496] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[    0.020746] pid_max: default: 32768 minimum: 301
[    0.021016] Security Framework initialized
[    0.021034] Yama: becoming mindful.
[    0.021093] AppArmor: AppArmor initialized
[    0.021181] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.021194] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.022359] CPU: Testing write buffer coherency: ok
[    0.022433] ftrace: allocating 39262 entries in 116 pages
[    0.133533] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.133613] Setting up static identity map for 0x80100000 - 0x80100060
[    0.167804] EFI services will not be available.
[    0.180740] Brought up 1 CPUs
[    0.180760] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[    0.180770] CPU: All CPU(s) started in SVC mode.
[    0.182399] devtmpfs: initialized
[    0.221055] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.221635] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.221668] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.225444] xor: measuring software checksum speed
[    0.264759]    arm4regs  :  1217.000 MB/sec
[    0.304710]    8regs     :  1091.000 MB/sec
[    0.344709]    32regs    :  1088.000 MB/sec
[    0.384709]    neon      :  1665.000 MB/sec
[    0.384720] xor: using function: neon (1665.000 MB/sec)
[    0.384742] pinctrl core: initialized pinctrl subsystem
[    0.386235] NET: Registered protocol family 16
[    0.390094] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.459089] omap_hwmod: debugss: _wait_target_disable failed
[    0.508757] cpuidle: using governor ladder
[    0.520738] cpuidle: using governor menu
[    0.537011] OMAP GPIO hardware version 0.1
[    0.563807] No ATAGs?
[    0.563839] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.564659] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[    0.564679] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[    0.676779] raid6: neonx2   gen()  1882 MB/s
[    0.744731] raid6: neonx2   xor()  1157 MB/s
[    0.744743] raid6: using algorithm neonx2 gen() 1882 MB/s
[    0.744753] raid6: .... xor() 1157 MB/s, rmw enabled
[    0.744762] raid6: using intx1 recovery algorithm
[    0.755709] edma 49000000.edma: TI EDMA DMA engine driver
[    0.761939] SCSI subsystem initialized
[    0.762379] usbcore: registered new interface driver usbfs
[    0.762459] usbcore: registered new interface driver hub
[    0.762650] usbcore: registered new device driver usb
[    0.763783] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.764863] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[    0.766334] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[    0.766627] media: Linux media interface: v0.10
[    0.766700] Linux video capture interface: v2.00
[    0.766793] pps_core: LinuxPPS API ver. 1 registered
[    0.766803] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giom...@linux.it>
[    0.766830] PTP clock support registered
[    0.767975] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.769124] Advanced Linux Sound Architecture Driver Initialized.
[    0.769955] NetLabel: Initializing
[    0.769971] NetLabel:  domain hash size = 128
[    0.769979] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.770055] NetLabel:  unlabeled traffic allowed by default
[    0.773170] clocksource: Switched to clocksource timer1
[    0.888492] VFS: Disk quotas dquot_6.6.0
[    0.888624] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.889038] AppArmor: AppArmor Filesystem Enabled
[    0.904705] NET: Registered protocol family 2
[    0.905784] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.905838] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.905899] TCP: Hash tables configured (established 4096 bind 4096)
[    0.905981] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.906005] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.906360] NET: Registered protocol family 1
[    0.915266] RPC: Registered named UNIX socket transport module.
[    0.915288] RPC: Registered udp transport module.
[    0.915296] RPC: Registered tcp transport module.
[    0.915303] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.916237] Unpacking initramfs...
[    1.089234] random: fast init done
[    1.303638] Freeing initrd memory: 5668K
[    1.304265] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    1.308209] audit: initializing netlink subsys (disabled)
[    1.308326] audit: type=2000 audit(1.236:1): initialized
[    1.313943] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    1.324301] zbud: loaded
[    1.332751] NFS: Registering the id_resolver key type
[    1.332803] Key type id_resolver registered
[    1.332813] Key type id_legacy registered
[    1.332833] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.333306] fuse init (API version 7.26)
[    1.334497] orangefs_debugfs_init: called with debug mask: :none: :0:
[    1.334794] orangefs_init: module version upstream loaded
[    1.334807] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    1.349314] Key type asymmetric registered
[    1.349340] Asymmetric key parser 'x509' registered
[    1.349489] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.353830] io scheduler noop registered
[    1.353847] io scheduler deadline registered
[    1.354175] io scheduler cfq registered (default)
[    1.356922] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    1.364105] gpio-of-helper ocp:cape-universal: ready
[    1.376588] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[    1.379032] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    1.382803] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    2.221212] console [ttyS0] enabled
[    2.225818] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250
[    2.235709] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 160, base_baud = 3000000) is a 8250
[    2.245660] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 161, base_baud = 3000000) is a 8250
[    2.258091] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[    2.265307] [drm] Initialized
[    2.272322] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.279674] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.286884] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.294058] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.323486] eqep 48300180.eqep: ver. 1.0
[    2.327757] eqep 48300180.eqep: count_mode:0
[    2.332105] eqep 48300180.eqep: invert_qa:1
[    2.336336] eqep 48300180.eqep: invert_qb:1
[    2.340563] eqep 48300180.eqep: invert_qi:0
[    2.344788] eqep 48300180.eqep: invert_qs:0
[    2.349014] eqep 48300180.eqep: swap_inputs:0
[    2.353416] eqep 48300180.eqep: QDECCTL:0x0180
[    2.357902] eqep 48300180.eqep: QPOSINIT:0x00000000
[    2.362823] eqep 48300180.eqep: QPOSMAX:0xffffffff
[    2.367658] eqep 48300180.eqep: QPOSCNT:0x00000000
[    2.372495] eqep 48300180.eqep: omit_interrupt:0
[    2.377169] eqep 48300180.eqep: QEINT:0x0800
[    2.381479] eqep 48300180.eqep: QUPRD:0x05f5e100
[    2.386138] eqep 48300180.eqep: QEPCTL:0x009e write
[    2.391059] eqep 48300180.eqep: QEPCTL:0x009e read
[    2.395915] eqep 48300180.eqep: irq:193, clk_rate:100000000
[    2.401856] eqep 48302180.eqep: ver. 1.0
[    2.406016] eqep 48302180.eqep: count_mode:0
[    2.410350] eqep 48302180.eqep: invert_qa:1
[    2.414579] eqep 48302180.eqep: invert_qb:1
[    2.418805] eqep 48302180.eqep: invert_qi:0
[    2.423032] eqep 48302180.eqep: invert_qs:0
[    2.427257] eqep 48302180.eqep: swap_inputs:0
[    2.431656] eqep 48302180.eqep: QDECCTL:0x0180
[    2.436142] eqep 48302180.eqep: QPOSINIT:0x00000000
[    2.441063] eqep 48302180.eqep: QPOSMAX:0xffffffff
[    2.445900] eqep 48302180.eqep: QPOSCNT:0x00000000
[    2.450735] eqep 48302180.eqep: omit_interrupt:0
[    2.455405] eqep 48302180.eqep: QEINT:0x0800
[    2.459717] eqep 48302180.eqep: QUPRD:0x05f5e100
[    2.464377] eqep 48302180.eqep: QEPCTL:0x009e write
[    2.469299] eqep 48302180.eqep: QEPCTL:0x009e read
[    2.474149] eqep 48302180.eqep: irq:194, clk_rate:100000000
[    2.479999] eqep 48304180.eqep: ver. 1.0
[    2.484128] eqep 48304180.eqep: count_mode:0
[    2.488462] eqep 48304180.eqep: invert_qa:1
[    2.492692] eqep 48304180.eqep: invert_qb:1
[    2.496919] eqep 48304180.eqep: invert_qi:0
[    2.501165] eqep 48304180.eqep: invert_qs:0
[    2.505390] eqep 48304180.eqep: swap_inputs:0
[    2.509789] eqep 48304180.eqep: QDECCTL:0x0180
[    2.514275] eqep 48304180.eqep: QPOSINIT:0x00000000
[    2.519196] eqep 48304180.eqep: QPOSMAX:0xffffffff
[    2.524030] eqep 48304180.eqep: QPOSCNT:0x00000000
[    2.528867] eqep 48304180.eqep: omit_interrupt:0
[    2.533530] eqep 48304180.eqep: QEINT:0x0800
[    2.537841] eqep 48304180.eqep: QUPRD:0x05f5e100
[    2.542500] eqep 48304180.eqep: QEPCTL:0x009e write
[    2.547421] eqep 48304180.eqep: QEPCTL:0x009e read
[    2.552270] eqep 48304180.eqep: irq:196, clk_rate:100000000
[    2.566331] libphy: Fixed MDIO Bus: probed
[    2.571671] CAN device driver interface
[    2.577382] c_can_platform 481cc000.can: c_can_platform device registered (regs=fa1cc000, irq=168)
[    2.587570] c_can_platform 481d0000.can: c_can_platform device registered (regs=fa1d0000, irq=169)
[    2.653259] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    2.659438] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    2.666595] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[    2.687858] libphy: 4a101000.mdio: probed
[    2.692228] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    2.702629] cpsw 4a100000.ethernet: Detected MACID = 94:e3:6d:ce:1d:e3
[    2.709518] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies)
[    2.721071] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.727809] ehci-pci: EHCI PCI platform driver
[    2.732420] ehci-platform: EHCI generic platform driver
[    2.738194] ehci-omap: OMAP-EHCI Host Controller driver
[    2.744638] usbcore: registered new interface driver usb-storage
[    2.754082] 47401300.usb-phy supply vcc not found, using dummy regulator
[    2.767417] 47401b00.usb-phy supply vcc not found, using dummy regulator
[    2.778688] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[    2.784137] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[    2.791898] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.798763] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.806046] usb usb1: Product: MUSB HDRC host driver
[    2.811056] usb usb1: Manufacturer: Linux 4.9.105-ti-r114 musb-hcd
[    2.817287] usb usb1: SerialNumber: musb-hdrc.1
[    2.823013] hub 1-0:1.0: USB hub found
[    2.827000] hub 1-0:1.0: 1 port detected
[    2.844999] omap_rtc 44e3e000.rtc: already running
[    2.850495] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    2.859598] i2c /dev entries driver
[    2.866480] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    2.875305] cpuidle: enable-method property 'ti,am3352' found operations
[    2.884159] omap_hsmmc 48060000.mmc: Got CD GPIO
[    2.971686] ledtrig-cpu: registered to indicate activity on CPUs
[    2.982014] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    2.988187] omap-aes 53500000.aes: will run requests pump with realtime priority
[    2.998580] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.010831] hidraw: raw HID events driver (C) Jiri Kosina
[    3.017492] usbcore: registered new interface driver usbhid
[    3.023212] usbhid: USB HID core driver
[    3.027823] remoteproc remoteproc0: wkup_m3 is available
[    3.043683] wireguard: WireGuard 0.0.20180809 loaded. See www.wireguard.com for information.
[    3.052580] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Ja...@zx2c4.com>. All Rights Reserved.
[    3.063743] NET: Registered protocol family 10
[    3.069233] mmc1: new high speed MMC card at address 0001
[    3.079666] mip6: Mobile IPv6
[    3.083313] NET: Registered protocol family 17
[    3.087915] mmcblk1: mmc1:0001 M62704 3.56 GiB
[    3.093104] can: controller area network core (rev 20120528 abi 9)
[    3.099424] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
[    3.106042] NET: Registered protocol family 29
[    3.110612] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
[    3.118038]  mmcblk1: p1
[    3.123825] Key type dns_resolver registered
[    3.128217] mpls_gso: MPLS GSO support
[    3.132330] omap_voltage_late_init: Voltage driver support not added
[    3.139435] PM: Cannot get wkup_m3_ipc handle
[    3.144089] ThumbEE CPU extension supported.
[    3.148447] Registering SWP/SWPB emulation handler
[    3.154366] registered taskstats version 1
[    3.158680] zswap: loaded using pool lzo/zbud
[    3.170064] Btrfs loaded, crc32c=crc32c-generic
[    3.208858] Key type encrypted registered
[    3.213370] AppArmor: AppArmor sha1 policy hashing enabled
[    3.237305] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[    3.376073] tda998x 0-0070: found TDA19988
[    3.381389] usb 1-1: New USB device found, idVendor=0409, idProduct=005a
[    3.388891] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)
[    3.388908] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.388911] [drm] No driver support for vblank timestamp query.
[    3.395428] tilcdc 4830e000.lcdc: No connectors reported connected with modes
[    3.395446] [drm] Cannot find any crtc or sizes - going 1024x768
[    3.429212] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.430391] hub 1-1:1.0: USB hub found
[    3.430486] hub 1-1:1.0: 4 ports detected
[    3.432382] Console: switching to colour frame buffer device 128x48
[    3.459744] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    3.492328] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
[    3.503745] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[    3.509653] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    3.516711] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    3.523876] remoteproc remoteproc0: powering up wkup_m3
[    3.532431] asoc-simple-card sound: hdmi-hifi.0 <-> 48038000.mcasp mapping ok
[    3.541453] PM: Cannot get wkup_m3_ipc handle
[    3.542738] omap_rtc 44e3e000.rtc: setting system clock to 2020-10-23 23:18:19 UTC (1603495099)
[    3.542748] of_cfs_init
[    3.542895] of_cfs_init: OK
[    3.543989] ALSA device list:
[    3.543997]   #0: TI BeagleBone Black
[    3.572027] Freeing unused kernel memory: 1024K
[    3.576752] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168
[    3.577024] remoteproc remoteproc0: remote processor wkup_m3 is now up
[    3.577047] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193
Loading, please wait...
starting version 232
[    3.682086] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.702389] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.710652] random: udevadm: uninitialized urandom read (16 bytes read)
[    3.725292] usb 1-1.1: new full-speed USB device number 3 using musb-hdrc
[    3.827661] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c534
[    3.841354] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.857365] usb 1-1.1: Product: USB Receiver
[    3.865345] usb 1-1.1: Manufacturer: Logitech
[    3.900483] input: Logitech USB Receiver as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C534.0001/input/input1
[    3.997520] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-musb-hdrc.1-1.1/input0
[    4.028330] PM: bootloader does not support rtc-only!
[    4.045429] input: Logitech USB Receiver as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input2
[    4.108332] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-musb-hdrc.1-1.1/input1
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Begin: Will now check root file system ... fsck from util-linux 2.29.2
[/sbin/fsck.ext4 (1) -- /dev/mmcblk1p1] fsck.ext4 -a -C0 /dev/mmcblk1p1
rootfs: clean, 49947/233392 files, 414922/932864 blocks
done.
[    7.267585] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[    7.693432] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.733943] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    7.752939] systemd[1]: Detected architecture arm.

Welcome to Debian GNU/Linux 9 (stretch)!

[    7.778780] systemd[1]: Set hostname to <G5-HMI>.
[    8.343491] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    8.370389] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[    8.394494] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    8.410526] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    8.426642] systemd[1]: Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Audit Socket.
[    8.442243] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    8.459277] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Listening on RPCbind Server Activation Socket.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Set up automount Arbitrary Executab…rmats File System Automount Point.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Reached target Swap.
[  OK  ] Created slice System Slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Reached target Slices.
         Starting Create list of required st…ce nodes for the current kernel...
         Mounting RPC Pipe File System...
         Mounting /sys/kernel/debug...
         Mounting POSIX Message Queue File System...
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on fsck to fsckd communication Socket.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Listening on Syslog Socket.
         Starting Journal Service...
         Starting Load Kernel Modules...
[    8.950444] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro
[  OK  ] Mounted RPC Pipe File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted /sys/kernel/debug.
[  OK  ] Started Create list of required sta…vice nodes for the current kernel.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Load Kernel Modules.
         Mounting Configuration File System...
         Starting Apply Kernel Variables...
         Mounting FUSE Control File System...
         Starting Load/Save Random Seed...
         Starting udev Coldplug all Devices...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Configuration File System.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Raise network interfaces...
         Starting Preprocess NFS configuration...
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Preprocess NFS configuration.
[  OK  ] Reached target NFS client services.
[  OK  ] Started udev Kernel Device Manager.
[   10.239654] systemd-journald[377]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
         Starting RPC bind portmap service...
         Starting Network Time Synchronization...
[  OK  ] Started RPC bind portmap service.
[  OK  ] Reached target RPC Port Mapper.
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Synchronized.
[   11.749748] net eth0: initializing cpsw version 1.12 (0)
[   11.760783] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[   11.783249] cpsw 4a100000.ethernet: ALE Table size 1024
[   11.874030] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1)
[   11.927941] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting VS5 bootsplash...
         Starting Generic Board Startup...
         Starting BB WL18xx wlan0 Service...
         Starting System Logging Service...
[  OK  ] Started Regular background program processing daemon.
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Vision Series 5 Human Machine Interface.
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
         Starting Login Service...
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Started System Logging Service.
[  OK  ] Started VS5 bootsplash.
[  OK  ] Started BB WL18xx wlan0 Service.
[  OK  ] Started Login Service.
[   13.958047] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[   13.983815] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   15.172766] using random self ethernet address
[   15.181401] using random host ethernet address
[   15.241434] using random self ethernet address
[   15.249548] using random host ethernet address
[  OK  ] Found device /dev/ttyS0.
[   15.443293] usb0: HOST MAC 94:e3:6d:ce:1d:e4
[   15.453631] usb0: MAC 94:e3:6d:ce:1d:e5
[   15.464216] usb1: HOST MAC 94:e3:6d:ce:1d:e7
[   15.477534] usb1: MAC 94:e3:6d:ce:1d:e8
[   15.834803] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[   16.053104] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready
[   16.492728] random: crng init done
[   16.496182] random: 7 urandom warning(s) missed due to ratelimiting
[  OK  ] Started Raise network interfaces.
[  OK  ] Reached target Network.
         Starting dnsmasq - A lightweight DHCP and caching DNS server...
         Starting OpenBSD Secure Shell server...
         Starting Permit User Sessions...
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Started Getty on tty1.
[   21.198215] pvrsrvkm: loading out-of-tree module taints kernel.
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started dnsmasq - A lightweight DHCP and caching DNS server.
[  OK  ] Reached target Host and Network Name Lookups.
[   21.990046] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1
[  OK  ] Reached target Sound Card.
[  OK  ] Found device /dev/ttyGS0.
[  OK  ] Started Serial Getty on ttyGS0.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started Generic Board Startup.
         Starting BB WL18xx Bluetooth Service...
[  OK  ] Started BB WL18xx Bluetooth Service.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.

Debian GNU/Linux 9 G5-HMI ttyS0

BeagleBoard.org Debian Image 2018-01-21

G5-HMI login:

Robert Nelson

unread,
Oct 23, 2020, 8:08:43 PM10/23/20
to Beagle Board
I bet it's bb-cape-overlays, just lock it:

sudo apt-mark hold bb-cape-overlays

Regards,
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/6f6e84c8-0620-4a74-8f7f-ba28fdbd6e0bo%40googlegroups.com.

Hartley Sweeten

unread,
Oct 23, 2020, 8:15:30 PM10/23/20
to BeagleBoard
OK, I did the hold on the bb-cape-overlays.

Running the 'sudo apt upgrade' now. I'll let you know how it goes shortly.

It it fails to boot again to you want the full serial port log?

Hartley
> To unsubscribe from this group and stop receiving emails from it, send an email to beagl...@googlegroups.com.

Hartley Sweeten

unread,
Oct 23, 2020, 8:32:07 PM10/23/20
to BeagleBoard
Yeah!!!! That worked!!! After 2-3 months I can finally update this stupid thing.

Here's the full boot from J1. I don have a couple questions at the end.

9818560 bytes read in 637 ms (14.7 MiB/s)
uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ...
uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ...
loading /boot/dtbs/4.9.105-ti-r114/am335x-boneblack-uboot.dtb ...
61638 bytes read in 43 ms (1.4 MiB/s)
uboot_overlays: [fdt_buffer=0x60000] ...
uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ...
1440 bytes read in 173 ms (7.8 KiB/s)
uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ...
4896 bytes read in 60 ms (79.1 KiB/s)
uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ...
711 bytes read in 142 ms (4.9 KiB/s)
uboot_overlays: loading /lib/firmware/univ-bbb-EVA-00A0.dtbo ...
62064 bytes read in 240 ms (252 KiB/s)
loading /boot/initrd.img-4.9.105-ti-r114 ...
5799056 bytes read in 382 ms (14.5 MiB/s)
debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0] ...
debug: [bootz 0x82000000 0x88080000:587c90 88000000] ...
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Ramdisk to 8fa78000, end 8ffffc90 ... OK
   reserving fdt memory region: addr=88000000 size=7e000
   Loading Device Tree to 8f9f7000, end 8fa77fff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.105-ti-r114 (root@a5-imx6q-wandboard-2gb) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP PREEMPT Fri Aug 17 11:05:53 UTC 2018
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: TI AM335x BeagleBone Black
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 48 MiB at 0x9c800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon)
[    0.000000] percpu: Embedded 15 pages/cpu @df902000 s31820 r8192 d21428 u61440
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129412
[    0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 440224K/522240K available (12288K kernel code, 1139K rwdata, 4324K rodata, 1024K init, 459K bss, 32864K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0000000 - 0xff800000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdfe00000   ( 510 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0d00000   (13280 kB)
[    0.000000]       .init : 0xc1300000 - 0xc1400000   (1024 kB)
[    0.000000]       .data : 0xc1400000 - 0xc151cd58   (1140 kB)
[    0.000000]        .bss : 0xc151e000 - 0xc1590ff0   ( 460 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000]  RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000052] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000066] OMAP clocksource: timer1 at 24000000 Hz
[    0.002104] clocksource_probe: no matching clocksources found
[    0.002431] Console: colour dummy device 80x30
[    0.002466] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.002475] This ensures that you still see kernel messages. Please
[    0.002483] update your kernel commandline.
[    0.002510] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[    0.020720] pid_max: default: 32768 minimum: 301
[    0.020989] Security Framework initialized
[    0.021005] Yama: becoming mindful.
[    0.021061] AppArmor: AppArmor initialized
[    0.021148] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.021161] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.022341] CPU: Testing write buffer coherency: ok
[    0.022416] ftrace: allocating 39262 entries in 116 pages
[    0.133505] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.133586] Setting up static identity map for 0x80100000 - 0x80100060
[    0.167776] EFI services will not be available.
[    0.180714] Brought up 1 CPUs
[    0.180734] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[    0.180744] CPU: All CPU(s) started in SVC mode.
[    0.182377] devtmpfs: initialized
[    0.221031] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.221614] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.221649] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.225369] xor: measuring software checksum speed
[    0.264735]    arm4regs  :  1217.000 MB/sec
[    0.304686]    8regs     :  1091.000 MB/sec
[    0.344684]    32regs    :  1088.000 MB/sec
[    0.384684]    neon      :  1665.000 MB/sec
[    0.384695] xor: using function: neon (1665.000 MB/sec)
[    0.384718] pinctrl core: initialized pinctrl subsystem
[    0.386220] NET: Registered protocol family 16
[    0.390073] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.459132] omap_hwmod: debugss: _wait_target_disable failed
[    0.508732] cpuidle: using governor ladder
[    0.520712] cpuidle: using governor menu
[    0.537009] OMAP GPIO hardware version 0.1
[    0.563832] No ATAGs?
[    0.563867] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.564801] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[    0.564825] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[    0.676740] raid6: neonx2   gen()  1882 MB/s
[    0.744710] raid6: neonx2   xor()  1157 MB/s
[    0.744722] raid6: using algorithm neonx2 gen() 1882 MB/s
[    0.744731] raid6: .... xor() 1157 MB/s, rmw enabled
[    0.744740] raid6: using intx1 recovery algorithm
[    0.755673] edma 49000000.edma: TI EDMA DMA engine driver
[    0.761887] SCSI subsystem initialized
[    0.762331] usbcore: registered new interface driver usbfs
[    0.762413] usbcore: registered new interface driver hub
[    0.762603] usbcore: registered new device driver usb
[    0.763736] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.764825] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[    0.766308] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[    0.766592] media: Linux media interface: v0.10
[    0.766660] Linux video capture interface: v2.00
[    0.766754] pps_core: LinuxPPS API ver. 1 registered
[    0.766764] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giom...@linux.it>
[    0.766790] PTP clock support registered
[    0.767942] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.769092] Advanced Linux Sound Architecture Driver Initialized.
[    0.769920] NetLabel: Initializing
[    0.769937] NetLabel:  domain hash size = 128
[    0.769944] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.770019] NetLabel:  unlabeled traffic allowed by default
[    0.773144] clocksource: Switched to clocksource timer1
[    0.888801] VFS: Disk quotas dquot_6.6.0
[    0.888935] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.889462] AppArmor: AppArmor Filesystem Enabled
[    0.905046] NET: Registered protocol family 2
[    0.906114] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.906168] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.906229] TCP: Hash tables configured (established 4096 bind 4096)
[    0.906315] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.906338] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.906685] NET: Registered protocol family 1
[    0.915593] RPC: Registered named UNIX socket transport module.
[    0.915612] RPC: Registered udp transport module.
[    0.915620] RPC: Registered tcp transport module.
[    0.915628] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.916568] Unpacking initramfs...
[    1.089204] random: fast init done
[    1.304334] Freeing initrd memory: 5664K
[    1.304953] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    1.308908] audit: initializing netlink subsys (disabled)
[    1.309022] audit: type=2000 audit(1.236:1): initialized
[    1.314681] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    1.324992] zbud: loaded
[    1.333516] NFS: Registering the id_resolver key type
[    1.333568] Key type id_resolver registered
[    1.333578] Key type id_legacy registered
[    1.333599] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.333976] fuse init (API version 7.26)
[    1.335144] orangefs_debugfs_init: called with debug mask: :none: :0:
[    1.335436] orangefs_init: module version upstream loaded
[    1.335449] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    1.350052] Key type asymmetric registered
[    1.350080] Asymmetric key parser 'x509' registered
[    1.350227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.354558] io scheduler noop registered
[    1.354577] io scheduler deadline registered
[    1.354900] io scheduler cfq registered (default)
[    1.357936] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    1.364807] gpio-of-helper ocp:cape-universal: ready
[    1.377458] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[    1.379767] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    1.383500] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[    2.221928] console [ttyS0] enabled
[    2.226481] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250
[    2.236372] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 160, base_baud = 3000000) is a 8250
[    2.246218] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 161, base_baud = 3000000) is a 8250
[    2.258660] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[    2.265836] [drm] Initialized
[    2.272789] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.280141] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.287344] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.294510] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.323999] eqep 48300180.eqep: ver. 1.0
[    2.328279] eqep 48300180.eqep: count_mode:0
[    2.332630] eqep 48300180.eqep: invert_qa:1
[    2.336864] eqep 48300180.eqep: invert_qb:1
[    2.341092] eqep 48300180.eqep: invert_qi:0
[    2.345320] eqep 48300180.eqep: invert_qs:0
[    2.349547] eqep 48300180.eqep: swap_inputs:0
[    2.353945] eqep 48300180.eqep: QDECCTL:0x0180
[    2.358432] eqep 48300180.eqep: QPOSINIT:0x00000000
[    2.363353] eqep 48300180.eqep: QPOSMAX:0xffffffff
[    2.368188] eqep 48300180.eqep: QPOSCNT:0x00000000
[    2.373025] eqep 48300180.eqep: omit_interrupt:0
[    2.377686] eqep 48300180.eqep: QEINT:0x0800
[    2.381998] eqep 48300180.eqep: QUPRD:0x05f5e100
[    2.386658] eqep 48300180.eqep: QEPCTL:0x009e write
[    2.391580] eqep 48300180.eqep: QEPCTL:0x009e read
[    2.396435] eqep 48300180.eqep: irq:193, clk_rate:100000000
[    2.402385] eqep 48302180.eqep: ver. 1.0
[    2.406541] eqep 48302180.eqep: count_mode:0
[    2.410876] eqep 48302180.eqep: invert_qa:1
[    2.415104] eqep 48302180.eqep: invert_qb:1
[    2.419331] eqep 48302180.eqep: invert_qi:0
[    2.423555] eqep 48302180.eqep: invert_qs:0
[    2.427780] eqep 48302180.eqep: swap_inputs:0
[    2.432179] eqep 48302180.eqep: QDECCTL:0x0180
[    2.436665] eqep 48302180.eqep: QPOSINIT:0x00000000
[    2.441588] eqep 48302180.eqep: QPOSMAX:0xffffffff
[    2.446421] eqep 48302180.eqep: QPOSCNT:0x00000000
[    2.451257] eqep 48302180.eqep: omit_interrupt:0
[    2.455917] eqep 48302180.eqep: QEINT:0x0800
[    2.460228] eqep 48302180.eqep: QUPRD:0x05f5e100
[    2.464896] eqep 48302180.eqep: QEPCTL:0x009e write
[    2.469819] eqep 48302180.eqep: QEPCTL:0x009e read
[    2.474669] eqep 48302180.eqep: irq:194, clk_rate:100000000
[    2.480520] eqep 48304180.eqep: ver. 1.0
[    2.484649] eqep 48304180.eqep: count_mode:0
[    2.488988] eqep 48304180.eqep: invert_qa:1
[    2.493220] eqep 48304180.eqep: invert_qb:1
[    2.497446] eqep 48304180.eqep: invert_qi:0
[    2.501670] eqep 48304180.eqep: invert_qs:0
[    2.505894] eqep 48304180.eqep: swap_inputs:0
[    2.510292] eqep 48304180.eqep: QDECCTL:0x0180
[    2.514779] eqep 48304180.eqep: QPOSINIT:0x00000000
[    2.519700] eqep 48304180.eqep: QPOSMAX:0xffffffff
[    2.524534] eqep 48304180.eqep: QPOSCNT:0x00000000
[    2.529371] eqep 48304180.eqep: omit_interrupt:0
[    2.534031] eqep 48304180.eqep: QEINT:0x0800
[    2.538343] eqep 48304180.eqep: QUPRD:0x05f5e100
[    2.543001] eqep 48304180.eqep: QEPCTL:0x009e write
[    2.547922] eqep 48304180.eqep: QEPCTL:0x009e read
[    2.552769] eqep 48304180.eqep: irq:196, clk_rate:100000000
[    2.566819] libphy: Fixed MDIO Bus: probed
[    2.572180] CAN device driver interface
[    2.577874] c_can_platform 481cc000.can: c_can_platform device registered (regs=fa1cc000, irq=168)
[    2.588068] c_can_platform 481d0000.can: c_can_platform device registered (regs=fa1d0000, irq=169)
[    2.653253] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    2.659438] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    2.666602] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[    2.687779] libphy: 4a101000.mdio: probed
[    2.692157] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    2.702570] cpsw 4a100000.ethernet: Detected MACID = 94:e3:6d:ce:1d:e3
[    2.709460] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies)
[    2.720998] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.727738] ehci-pci: EHCI PCI platform driver
[    2.732354] ehci-platform: EHCI generic platform driver
[    2.738138] ehci-omap: OMAP-EHCI Host Controller driver
[    2.744584] usbcore: registered new interface driver usb-storage
[    2.754062] 47401300.usb-phy supply vcc not found, using dummy regulator
[    2.767439] 47401b00.usb-phy supply vcc not found, using dummy regulator
[    2.778644] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[    2.784096] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[    2.791861] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.798726] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.806006] usb usb1: Product: MUSB HDRC host driver
[    2.811015] usb usb1: Manufacturer: Linux 4.9.105-ti-r114 musb-hcd
[    2.817247] usb usb1: SerialNumber: musb-hdrc.1
[    2.822977] hub 1-0:1.0: USB hub found
[    2.826951] hub 1-0:1.0: 1 port detected
[    2.844902] omap_rtc 44e3e000.rtc: already running
[    2.850391] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    2.859514] i2c /dev entries driver
[    2.866384] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    2.875228] cpuidle: enable-method property 'ti,am3352' found operations
[    2.884072] omap_hsmmc 48060000.mmc: Got CD GPIO
[    2.971662] ledtrig-cpu: registered to indicate activity on CPUs
[    2.982005] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    2.988166] omap-aes 53500000.aes: will run requests pump with realtime priority
[    2.998550] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.010840] hidraw: raw HID events driver (C) Jiri Kosina
[    3.017408] usbcore: registered new interface driver usbhid
[    3.023141] usbhid: USB HID core driver
[    3.027769] remoteproc remoteproc0: wkup_m3 is available
[    3.043772] wireguard: WireGuard 0.0.20180809 loaded. See www.wireguard.com for information.
[    3.052663] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Ja...@zx2c4.com>. All Rights Reserved.
[    3.063825] NET: Registered protocol family 10
[    3.069329] mmc1: new high speed MMC card at address 0001
[    3.079772] mip6: Mobile IPv6
[    3.083405] NET: Registered protocol family 17
[    3.088008] mmcblk1: mmc1:0001 M62704 3.56 GiB
[    3.093228] can: controller area network core (rev 20120528 abi 9)
[    3.099528] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
[    3.106150] NET: Registered protocol family 29
[    3.110715] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
[    3.118129]  mmcblk1: p1
[    3.123899] Key type dns_resolver registered
[    3.128290] mpls_gso: MPLS GSO support
[    3.132403] omap_voltage_late_init: Voltage driver support not added
[    3.139517] PM: Cannot get wkup_m3_ipc handle
[    3.144169] ThumbEE CPU extension supported.
[    3.148527] Registering SWP/SWPB emulation handler
[    3.154461] registered taskstats version 1
[    3.158783] zswap: loaded using pool lzo/zbud
[    3.170224] Btrfs loaded, crc32c=crc32c-generic
[    3.209100] Key type encrypted registered
[    3.213566] AppArmor: AppArmor sha1 policy hashing enabled
[    3.237282] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[    3.376033] tda998x 0-0070: found TDA19988
[    3.381363] usb 1-1: New USB device found, idVendor=0409, idProduct=005a
[    3.388863] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)
[    3.388880] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.388884] [drm] No driver support for vblank timestamp query.
[    3.395407] tilcdc 4830e000.lcdc: No connectors reported connected with modes
[    3.395426] [drm] Cannot find any crtc or sizes - going 1024x768
[    3.429182] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.430378] hub 1-1:1.0: USB hub found
[    3.430474] hub 1-1:1.0: 4 ports detected
[    3.431693] Console: switching to colour frame buffer device 128x48
[    3.459784] tilcdc 4830e000.lcdc: fb0:  frame buffer device
[    3.492292] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
[    3.503705] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[    3.509609] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    3.516662] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    3.523820] remoteproc remoteproc0: powering up wkup_m3
[    3.532369] asoc-simple-card sound: hdmi-hifi.0 <-> 48038000.mcasp mapping ok
[    3.541413] PM: Cannot get wkup_m3_ipc handle
[    3.542697] omap_rtc 44e3e000.rtc: setting system clock to 2020-10-24 00:22:19 UTC (1603498939)
[    3.542708] of_cfs_init
[    3.542855] of_cfs_init: OK
[    3.543955] ALSA device list:
[    3.543964]   #0: TI BeagleBone Black
[    3.572001] Freeing unused kernel memory: 1024K
[    3.576715] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168
[    3.576984] remoteproc remoteproc0: remote processor wkup_m3 is now up
[    3.577005] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193
Loading, please wait...
starting version 232
[    3.686222] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.702314] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.711014] random: udevadm: uninitialized urandom read (16 bytes read)
[    3.725263] usb 1-1.1: new full-speed USB device number 3 using musb-hdrc
[    3.827645] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c534
[    3.841316] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.857337] usb 1-1.1: Product: USB Receiver
[    3.865407] usb 1-1.1: Manufacturer: Logitech
[    3.890281] input: Logitech USB Receiver as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C534.0001/input/input1
[    3.989439] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-musb-hdrc.1-1.1/input0
[    4.020404] PM: bootloader does not support rtc-only!
[    4.037405] input: Logitech USB Receiver as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C534.0002/input/input2
[    4.100396] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-musb-hdrc.1-1.1/input1
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Begin: Will now check root file system ... fsck from util-linux 2.29.2
[/sbin/fsck.ext4 (1) -- /dev/mmcblk1p1] fsck.ext4 -a -C0 /dev/mmcblk1p1
rootfs: clean, 49969/233392 files, 414359/932864 blocks
done.
[   13.337960] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[   13.789991] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.830298] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   13.849487] systemd[1]: Detected architecture arm.

Welcome to Debian GNU/Linux 9 (stretch)!

[   13.870759] systemd[1]: Set hostname to <G5-HMI>.
[   14.468576] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[   14.486328] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[   14.502400] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[   14.526364] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[   14.542373] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[   14.558584] systemd[1]: Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Audit Socket.
[   14.575095] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
         Mounting /sys/kernel/debug...
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on fsck to fsckd communication Socket.
         Mounting RPC Pipe File System...
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Reached target Paths.
[  OK  ] Listening on Syslog Socket.
[  OK  ] Listening on RPCbind Server Activation Socket.
[  OK  ] Reached target Swap.
[  OK  ] Reached target Slices.
[  OK  ] Set up automount Arbitrary Executab…rmats File System Automount Point.
         Mounting POSIX Message Queue File System...
[  OK  ] Listening on Journal Socket.
         Starting Load Kernel Modules...
         Starting Remount Root and Kernel File Systems...
         Starting Journal Service...
         Starting Create list of required st…ce nodes for the current kernel...
[   15.049440] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro
[  OK  ] Mounted RPC Pipe File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted /sys/kernel/debug.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Create list of required sta…vice nodes for the current kernel.
         Starting Create Static Device Nodes in /dev...
         Starting udev Coldplug all Devices...
         Starting Load/Save Random Seed...
         Starting Apply Kernel Variables...
         Mounting Configuration File System...
         Mounting FUSE Control File System...
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Mounted Configuration File System.
[  OK  ] Mounted FUSE Control File System.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Raise network interfaces...
         Starting Preprocess NFS configuration...
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Preprocess NFS configuration.
[  OK  ] Reached target NFS client services.
[  OK  ] Started udev Kernel Device Manager.
[   16.347168] systemd-journald[1404]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
         Starting RPC bind portmap service...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started RPC bind portmap service.
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems.
[  OK  ] Reached target RPC Port Mapper.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started Daily apt download activities.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started Vision Series 5 Human Machine Interface.
[  OK  ] Started Regular background program processing daemon.
         Starting Login Service...
         Starting BB WL18xx wlan0 Service...
[  OK  ] Started D-Bus System Message Bus.
         Starting System Logging Service...
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Reached target Timers.
         Starting VS5 bootsplash...
[  OK  ] Started BB WL18xx wlan0 Service.
[  OK  ] Started System Logging Service.
[  OK  ] Started Login Service.
[  OK  ] Started VS5 bootsplash.
[   21.946082] random: crng init done
[   21.949534] random: 7 urandom warning(s) missed due to ratelimiting
[  OK  ] Reached target Sound Card.
[  OK  ] Found device /dev/ttyS0.
[***   ] (1 of 2) A start job is running for…network interfaces (34s / 5min 1s)[   49.638020] pvrsrvkm: loading out-of-tree module taints kernel.
[**    ] (2 of 2) A start job is running for dev-ttyGS0.device (35s / 1min 30s)[   50.061998] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1
[    **] (1 of 2) A start job is running for…network interfaces (40s / 5min 1s)[   55.482071] net eth0: initializing cpsw version 1.12 (0)
[   55.493362] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[   55.509427] cpsw 4a100000.ethernet: ALE Table size 1024
[   ***] (1 of 2) A start job is running for…etwork interfaces (41s / 5min 40s)[   55.598034] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1)
[   55.627984] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[***   ] (2 of 2) A start job is running for dev-ttyGS0.device (42s / 1min 30s)[   57.638185] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[   57.646399] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  OK  ] Started Raise network interfaces.
[  OK  ] Reached target Network.
         Starting Permit User Sessions...
         Starting OpenBSD Secure Shell server...
         Starting Generic Board Startup...
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Started Getty on tty1.
[  OK  ] Started OpenBSD Secure Shell server.
[   64.008567] using random self ethernet address
[   64.016070] using random host ethernet address
[   64.076738] using random self ethernet address
[   64.084297] using random host ethernet address
[   64.267472] usb0: HOST MAC 94:e3:6d:ce:1d:e4
[   64.277690] usb0: MAC 94:e3:6d:ce:1d:e5
[   64.290638] usb1: HOST MAC 94:e3:6d:ce:1d:e7
[   64.301474] usb1: MAC 94:e3:6d:ce:1d:e8
[  OK  ] Found device /dev/ttyGS0.
[   64.645744] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[  OK  ] Started Serial Getty on ttyGS0.
[  OK  ] Reached target Login Prompts.
[   64.781848] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready
         Starting dnsmasq - A lightweight DHCP and caching DNS server...
[  OK  ] Started dnsmasq - A lightweight DHCP and caching DNS server.
[  OK  ] Reached target Host and Network Name Lookups.
[  OK  ] Started Generic Board Startup.
         Starting BB WL18xx Bluetooth Service...
[  OK  ] Started BB WL18xx Bluetooth Service.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.

Debian GNU/Linux 9 G5-HMI ttyS0

BeagleBoard.org Debian Image 2018-01-21
Vision Engraving Systems VS5 support 2019-06-20

G5-HMI login:

Questions...

Is not updating the bb-cape-overlays going to be an issue? What do you think the problem is?

Is the bb-wl18xx-firmware needed? The BeagleBone Black does not have wireless (or is this bluetooth?) so I assume not but I want to make sure before removing it.

What is the pvrsrvkm driver? It taints the kernel:
[   49.638020] pvrsrvkm: loading out-of-tree module taints kernel.

Are these two packages needed?
firmware-realtek
firmware-ti-connectivity

What are these two packages for?
ti-sgx-ti335x-modules-4.9.105-ti-r1
tiomapconf

I have my image pretty stripped down but have never been sure about the 4 above.

Thanks for your help.

Hartley





Hartley Sweeten

unread,
Feb 4, 2021, 5:59:48 PM2/4/21
to BeagleBoard
Hello,

I just did an 'apt update' and see that bb-cape-overlays has been updated.

$ apt-mark showhold
bb-cape-overlays

$ apt list --upgradable -a
Listing... Done
bb-cape-overlays/unknown 4.14.20201221.0-0~stretch+20201221 armhf [upgradable from: 4.4.20190610.0-0rcnee0~stretch+20190610]
bb-cape-overlays/now 4.4.20190610.0-0rcnee0~stretch+20190610 armhf [installed,upgradable to: 4.14.20201221.0-0~stretch+20201221]

I still have that package on hold since it caused my boards not to boot.

Any ideas what may be causing my boards not to boot when I upgrade that package? Is the current package any better? I don't want to mess with it if it breaks things again.

Thanks

Robert Nelson

unread,
Feb 4, 2021, 6:11:12 PM2/4/21
to Beagle Board
On Thu, Feb 4, 2021 at 5:00 PM Hartley Sweeten <biggu...@gmail.com> wrote:
>
> Hello,
>
> I just did an 'apt update' and see that bb-cape-overlays has been updated.
>
> $ apt-mark showhold
> bb-cape-overlays
>
> $ apt list --upgradable -a
> Listing... Done
> bb-cape-overlays/unknown 4.14.20201221.0-0~stretch+20201221 armhf [upgradable from: 4.4.20190610.0-0rcnee0~stretch+20190610]
> bb-cape-overlays/now 4.4.20190610.0-0rcnee0~stretch+20190610 armhf [installed,upgradable to: 4.14.20201221.0-0~stretch+20201221]
>
> I still have that package on hold since it caused my boards not to boot.
>
> Any ideas what may be causing my boards not to boot when I upgrade that package? Is the current package any better? I don't want to mess with it if it breaks things again.

As long as you are running 4.9.x based kernel, do NOT upgrade to the
4.14.x version of bb-cape-overlays as it only supports v4.14.x based
kernels and later..

Regards,
Reply all
Reply to author
Forward
0 new messages