Beagle Bone black, vdd_3.3 and vdd_5 shows 2.47v

[marri...@gmail.com]

Linux beaglebone 4.9.45-ti-r57 #1 SMP PREEMPT Fri Aug 25 22:58:38 UTC 2017 armv7l GNU/Linux

I was trying to add a i2c device to bbb. After several failed attempts, I measured the power on the rail. The voltage
from pin0 to pin 3 shows 2.47v. As well frompin 0 to pin 5 which suppose to be 5V DD.
The power is done trough the power jack 5V, and is that shows 5,1V.
I thought the BBB is busted, so I got a second BBB, and it has the same behaviour.
I am using the device tree with overlays.

Thank you

[evilwulfie]

p8 and p9 pins start at pin number 1

can you try again?

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0e462b62-f336-4e79-9444-54592f346b57%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.